CA 61 Suburban Part Out - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Grandpa54 · 08-11-2015, 08:18 PM

Quote:

Originally Posted by perro13

the long ones?

anything on this?

perro13 · 08-11-2015, 08:37 PM

Quote:

Originally Posted by tmck

Do you still have all the interior trim around the side windows, both sides? Also the top two long pieces that roll up to the headliner. 14 pieces total. If so how much. I can pick up

I'm going to keep them for now

perro13 · 08-11-2015, 08:39 PM

Quote:

Originally Posted by Grandpa54

anything on this?

going to keep for now, sending my sub to paint soon, going to pick the best ones for now.

perro13 · 08-11-2015, 09:07 PM

Quote:

Originally Posted by 64chevycrewcab

Do you front and rear slider side window frames for the passenger side for a 66 Burb?

pm sent

perro13 · 08-12-2015, 09:05 PM

Quote:

Originally Posted by Joemomma1

How about the rear lower pan to do a lift gate conversion?

Thanks

If you can use it i'll take $125. it was cut a bit see pic easy fix.

perro13 · 08-12-2015, 09:10 PM

Quote:

Originally Posted by argonaut

Perro,
I'll take the dome lamp base. For reference I took a pic of mine. I'm interested in the steel base, not the plastic lamp piece. Its spot welded to the center bar. If you are cutting up the body then maybe you can just cut the center section of the bar out with the bracket to make it easier?

Also, how is that spare tire mounted in the back? is there a bracket in there? Got a pic?

Thanks!

cut it out today, couldn't cut it the way I wanted to. I thought ia was going to cut up roof.

Joemomma1 · 08-14-2015, 11:44 PM

Quote:

Originally Posted by perro13

If you can use it i'll take $125. it was cut a bit see pic easy fix.

Thanks for offering it up. Was it cut in error while trying to remove it? I've never done a conversion but know that I need that bottome piece. Do you know if the top or anything else on the body is needed?

Thanks

perro13 · 08-15-2015, 12:25 PM

Quote:

Originally Posted by Joemomma1

Thanks for offering it up. Was it cut in error while trying to remove it? I've never done a conversion but know that I need that bottome piece. Do you know if the top or anything else on the body is needed?

Thanks

yes cut in error, Its a bolt up piece. I've never done a conversion, from what I've read the lower piece is all you need. I might be wrong

**bhc41051** · 08-15-2015, 03:58 PM

Would you consider selling just the fuel gauge? Cluster looks.. well customized I guess

perro13 · 08-15-2015, 05:03 PM

Quote:

Originally Posted by bhc41051

Would you consider selling just the fuel gauge? Cluster looks.. well customized I guess

sure $12 shipped

**bhc41051** · 08-15-2015, 05:31 PM

I'll take it, Paypal sent

perro13 · 08-15-2015, 05:38 PM

Quote:

Originally Posted by bhc41051

I'll take it, Paypal sent

Sold, I'll get it out in a few days. thanks

**pimpston65** · 08-16-2015, 12:02 AM

for clamshell conversion all you need is the hard to find valance, and hinges. the top of the rear opening has a plate thats removed to revel the access for the top hinges...

**ChiefRocka** · 08-17-2015, 01:37 AM

Did the dome sell ?

**argonaut** · 08-17-2015, 03:27 AM

Randy, I dont think I ever heard back from you on the interior dome lamp base. I'm also interested in the front roof section if it isn't rusted out. Oh, and the interior spare tire mount.
Thanks!

**argonaut** · 08-17-2015, 03:35 AM

Woops! I totally missed the pics of the dome lamp. I'll take it. Let me know about the front roof skin and the spare tire mount.

perro13 · 08-17-2015, 11:29 AM

Quote:

Originally Posted by argonaut

Woops! I totally missed the pics of the dome lamp. I'll take it. Let me know about the front roof skin and the spare tire mount.

get you pics of the spare tire mount, roof skin is solid.
pm sent

64chevycrewcab · 08-18-2015, 03:32 AM

Do you have a rust free 66 burb tailgate?

perro13 · 08-18-2015, 11:52 PM

getting ready to cut up the burban, Last call

**pimpston65** · 08-19-2015, 08:40 AM

what about the triangle rear tail lamp portion on each side, i can graft those into mine...

1963c-10 · 08-19-2015, 10:42 AM

Quote:

Originally Posted by perro13

Sorry about the delay.....still want the cable. PM me the payment info again. Need deluxe wiper, choke knobs also Perro if you happen to come across them

perro13 · 08-19-2015, 10:49 AM

Quote:

Originally Posted by pimpston65

what about the triangle rear tail lamp portion on each side, i can graft those into mine...

let me about cutting them out

**61ChevyPanel** · 08-23-2015, 04:22 AM

Are the front frame horns in decent shape? I need about 10 inches of the front of the frame.

Daryl

perro13 · 08-23-2015, 11:05 AM

Quote:

Originally Posted by 61ChevyPanel

Are the front frame horns in decent shape? I need about 10 inches of the front of the frame.

Daryl

frame horns are in good shape, but the frame is a 63 up

**sofilofi** · 08-23-2015, 11:52 AM

Is this floor section behind the passenger side good?Do you have the rail/strip that goes on the floor under the rear leg of the jump seat?
Thanks,
Jesse

08-15-2015, 03:58 PM	#109
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: 61 Suburban Part Out Would you consider selling just the fuel gauge? Cluster looks.. well customized I guess

08-15-2015, 05:31 PM	#111
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: 61 Suburban Part Out I'll take it, Paypal sent

08-16-2015, 12:02 AM	#113
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: 61 Suburban Part Out for clamshell conversion all you need is the hard to find valance, and hinges. the top of the rear opening has a plate thats removed to revel the access for the top hinges...

08-17-2015, 01:37 AM	#114
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: 61 Suburban Part Out Did the dome sell ? __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

08-17-2015, 03:27 AM	#115
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 61 Suburban Part Out Randy, I dont think I ever heard back from you on the interior dome lamp base. I'm also interested in the front roof section if it isn't rusted out. Oh, and the interior spare tire mount. Thanks! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! Last edited by argonaut; 08-17-2015 at 03:34 AM.

08-17-2015, 03:35 AM	#116
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: 61 Suburban Part Out Woops! I totally missed the pics of the dome lamp. I'll take it. Let me know about the front roof skin and the spare tire mount. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

08-18-2015, 03:32 AM	#118
64chevycrewcab Registered User Join Date: Feb 2013 Location: Mt. Pleasant, Michigan Posts: 143	Re: 61 Suburban Part Out Do you have a rust free 66 burb tailgate? __________________ 1961 Apache 10 with side trim 1964 4 door crew cab C20 1966 Chevy Suburban with custom trim 1961 K30 with a 4-53T Detroit diesel 1966 GMC 4X4 Suburban

08-18-2015, 11:52 PM	#119
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: 61 Suburban Part Out getting ready to cut up the burban, Last call

08-19-2015, 08:40 AM	#120
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: 61 Suburban Part Out what about the triangle rear tail lamp portion on each side, i can graft those into mine...

08-23-2015, 04:22 AM	#123
61ChevyPanel Active Member Join Date: Nov 2011 Location: Los Angeles, CA Posts: 113	Re: 61 Suburban Part Out Are the front frame horns in decent shape? I need about 10 inches of the front of the frame. Daryl

08-23-2015, 11:52 AM	#125
sofilofi Junior Member Join Date: Dec 2011 Location: Whittier CA Posts: 81	Re: 61 Suburban Part Out Is this floor section behind the passenger side good?Do you have the rail/strip that goes on the floor under the rear leg of the jump seat? Thanks, Jesse Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.