4-5-6 Chevy Truck parts

[LILRED66]

Originally Posted by TwoFiftyShifter

LILRED, I see you really do have a lot of parts, just curious as to what you would ship, I.E doors, fenders and hoods.

Thanks for the inquiry. I can ship everything except cabs and beds.

I ship small items, via USPS, Priority Mail.

I ship medium items, via FedEx, Ground.

I ship large items, via Greyhound Express.

Thanks for the inquiry and please let me know if I can help you with any 4-5-6 Chevy truck parts in the future.

[LILRED66]

I am looking for a factory "hard pipe" radiator hose, like this one. If you have one, I am willing to trade for parts you need.

[oklahomaduner]

How much for the cab you posted?

[LILRED66]

The cab I posted is $500.00, picked up at my shop in Kansas City, KS. Thanks for your interest and let me know if I can answer any questions about this item or other 4-5-6 Chevy truck parts in the future.

[ron19]

I'm looking for the u-nuts (or spring clips or whatever there called) that screws the instrument panel to the dash. Basically, the screws that hold the panel to the dash, screw to these clips. I only have 2 and I believe there are places for about 5 total. I can try to explain better if your not sure what I'm talking about. I can't seem to find them in any catalog.

Thanks.

[LILRED66]

They are called "J" nuts or spring nuts. You can get them at most auto parts stores and the in the specialty hardware section of local big box home improvement stores. They have an aisle of yellow slide organizers with several different sizes.

[ron19]

Originally Posted by LILRED66

They are called "J" nuts or spring nuts. You can get them at most auto parts stores and the in the specialty hardware section of local big box home improvement stores. They have an aisle of yellow slide organizers with several different sizes.

Thanks Red, I'll check it out and see if I can find them. Always appreciate your help on the board.

[LILRED66]

ron19:

Did you find your "J" nuts? If not, let me know and I will send you five of them to install your dash cluster.

Please let me know if I can help you with other 4-5-6 Chevy truck parts in the future.

[LILRED66]

The '64 cab sold to BIGPIMP (Larry). Thanks for your business.

Anyone else needing good, used parts for their 4-5-6 Chevy truck project, please let me know...Just in time for spring.

[BIGPIMP]

Originally Posted by LILRED66

The '64 cab sold to BIGPIMP (Larry). Thanks for your business.

Anyone else needing good, used parts for their 4-5-6 Chevy truck project, please let me know...Just in time for spring.

hey tony everything turned out alright got everything from greyhound .thanx man . good doing business .

[LILRED66]

Originally Posted by BIGPIMP

hey tony everything turned out alright got everything from greyhound .thanx man . good doing business .

Wow, that was quick. I dropped the door shell and front fender off at the Greyhound terminal in Kansas City on Friday morning. I'm glad you got the parts and I hope they work out good for you.

Thanks again for your business and please let me know if I can help you with other 4-5-6 Chevy truck parts in the future.

PS-How about some photos of your rig?

[66chevy PROSTREET]

do you have any 66 hoods in very good shape? thanks

[LILRED66]

Originally Posted by 66chevy PROSTREET

do you have any 66 hoods in very good shape? thanks

I have a few very good, used hood shells. The shipping will be $125.00-$150.00, plus the cost of the hood.

[66chevy PROSTREET]

pm and email sent,

thanks

[LILRED66]

Originally Posted by 66chevy PROSTREET

pm and email sent,

thanks

Nick:

I replied to your PM. Thanks for the opportunity and let me know if I can help you with this item or othe 4-5-6 Chevy trucks parts in the future.

[LILRED66]

Spring has sprung, so let me know if you need any 4-5-6 Chevy truck parts, especially if that tax refund is burning a hole in your pocket. Thanks for the opportunity.

[Rafael505]

Originally Posted by LILRED66

Spring has sprung, so let me know if you need any 4-5-6 Chevy truck parts, especially if that tax refund is burning a hole in your pocket. Thanks for the opportunity.

Hello , here a pic of my truck and as you see I need pretty much the whole front end, this truck is 63 c10, how can I get a hold of you for some parts ,, thanks

[LILRED66]

Wow, not much good stuff left on the front end of that one...nice rig otherwise. I just returned from Albuquerque yesterday. I wish I could have brought parts to you then. My contact information is in my signature, so you can reach me via e-mail or phone.

Please let me know if I can help you with any good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[Rafael505]

Ok I didn't see the bottom of your post's it has your #, haha, wouldn't parts from 60 to 66 fit as far as fenders, hood, radiator support, and so on?

[LILRED66]

Rafael505:

You have a PM regarding the parts you are seeking. Thanks for the opportunity.

[rayce08]

hey tony , maybe i missed it but what does a driver and pass. door run , rust free ( dont mind fixing dents ) shipped to 36575 ? thanks

[LILRED66]

Originally Posted by rayce08

hey tony , maybe i missed it but what does a driver and pass. door run , rust free ( dont mind fixing dents ) shipped to 36575 ? thanks

I sell good, used, repaired door shells for $175.00, plus packaging & shipping, via Greyhound-Freight, that usually runs $65.00 each. When receiving items, via Greyhound-Freight, the buyer must pick-up the items at the terminal nearest your location. This is the most economical method I have found to ship large items, like door shells and fenders.

I do the panel repairs on any rusty areas in my shop. I also weld any non-stock mirror holes or other imperfections. I do not skim-coat or primer anything, because most body shops want to see the virgin sheet metal, prior to doing any preparations for bodywork, primer or paint.

I also offer a $40.00 core credit for a rusty door shell. This is based on the door shell being repairable. Also, I sell the door shell only, due to the lighter weight of shipping without the glass, innards and hardware.

Please let me know if I can help you with these items or other 4-5-6 Chevy trucks parts in the future and thanks for the opportunity.

[rayce08]

do u have shells that have no rust ( not repaired ) ?

[LILRED66]

Originally Posted by rayce08

do u have shells that have no rust ( not repaired ) ?

Thanks for the inquiry. At this time, I don't have any unmolested, zero-rust, zero-dents, zero blemishes door shells. When I do, they don't last long and they go for $300.00 each.

Sorry I couldn't help you with this item, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

PS - If you find some good, unmolested, original door shells with on damage of any kind, snag them up, because they are almost extinct and mighty costly.

[LILRED66]

Spring is here...anyone need any parts for their project? Do you need your fender tails repaired or the rust in the floorboards of your cab? I do patch panel repairs.

Please let me know if I can help you with anything 4-5-6 Chevy truck related and thanks for the opportunity.