Project " Melting Pot" - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hollywood Knight · 05-21-2010, 09:46 PM

Quote:

Originally Posted by FRENCHBLUE72

Where did you get that chrome booster and how is the chrome job on it/

booster came from cpp and the chrome is real nice. a lot of guys say they have issuses with this unit i can see how that might happen . the pedal dosent feel right and when i was installing it i had the same problem . at the bottom of the shaft there is a locking nut remove the nut a now it feels the way it should

Hollywood Knight · 05-21-2010, 09:59 PM

installed bedside and glass today

VA72C10 · 05-21-2010, 10:01 PM

Nice progress!!!

Hollywood Knight · 05-21-2010, 10:49 PM

Quote:

Originally Posted by VA72C10

Nice progress!!!

thanks not sure i would ever do this again to much work and $

FRENCHBLUE72 · 05-21-2010, 11:13 PM

So the booster seems fine now that you adjusted the pedal nut? I have been eyeballing one of these for awhile now and I may go ahead and get one..

VA72C10 · 05-22-2010, 12:49 PM

Quote:

Originally Posted by Hollywood Knight

thanks not sure i would ever do this again to much work and $

I have to agree....it's a ton of work and cash...

I'm planning for my next build to start off with a project truck that got abandoned that's close to completion....like the blazer I just picked up.

Hollywood Knight · 05-22-2010, 01:09 PM

Quote:

Originally Posted by VA72C10

I have to agree....it's a ton of work and cash...

I'm planning for my next build to start off with a project truck that got abandoned that's close to completion....like the blazer I just picked up.

thats the way to go. how is the blazer anyway? i love the blazer, my last one was a bust.

VA72C10 · 05-22-2010, 03:10 PM

Quote:

Originally Posted by Hollywood Knight

thats the way to go. how is the blazer anyway? i love the blazer, my last one was a bust.

It's going slow as I've been out of town on business and then when in town I've been helping friends or going to Church meetings. Or, like today, watching my daughters while my wife goes to a women's meeting at church.
But man, the PO has around 15K in receipts NOT counting his countless hours of labor. It's been nice starting in on a project at this stage. If I really wanted I could still change the look which I have with chrome bumpers and grille going in instead of white, different interior than the PO had planned. If I wanted to, I could have changed the color but I like the factory color anyways so it's a keeper and saves some work with the dash, jams, and firewall being completed already.

Hollywood Knight · 05-23-2010, 09:15 PM

cut the bed rail to clear the blazer tank and put the bed on the truck. not good it has to much of a rake . i could go another 2" in the back end.

Hollywood Knight · 05-24-2010, 12:18 AM

any pics of 4/6 or 5/7 drops ? i think the rear springs are 5" on my truck and thought they were 6" drop hmmmm.

Hollywood Knight · 05-24-2010, 12:19 AM

I want to run 18s and 20s

Hollywood Knight · 05-26-2010, 07:38 PM

my friend Kyle came over today with a coys 20" for the front to see how they would fit and man they looked good. 22s for the rear with a 7" drop should be just right. now I need to come up with the cash.

northern 85 · 05-26-2010, 08:12 PM

Wow looking great!!

VA72C10 · 05-26-2010, 09:43 PM

yep, that'll work

sergio rios · 05-26-2010, 10:38 PM

truck looks great. what kind of paint is that,what is the color code and brand,,

Hollywood Knight · 06-10-2010, 12:52 AM

just waiting on some parts to keep this project going. should have some pics this week once they get here.

Hollywood Knight · 06-25-2010, 10:40 PM

new wheels and tires today. door paint doesn't match can you tell hmmm.

Hollywood Knight · 06-26-2010, 07:07 PM

One step forward two steps back . looks like the truck will be bagged in the rear . the front looks good but what do I know . still to much of a rack for me so I might have some parts for sale.

b&a72 · 06-26-2010, 09:13 PM

Project looks good! Where in Mesa are you?

VA72C10 · 06-26-2010, 10:26 PM

Quote:

Originally Posted by Hollywood Knight

One step forward two steps back . looks like the truck will be bagged in the rear . the front looks good but what do I know . still to much of a rack for me so I might have some parts for sale.

definitely bag the rear...the truck deserves it

kyle4381 · 06-30-2010, 09:14 PM

Get those bags installed... Looks good

Nice Rims..

uno67 · 07-01-2010, 12:04 PM

don't start selling parts just yet. as you lower the back the front will come up a bit might balance it self out. very nice truck keep grinding away.

sgaylord · 07-01-2010, 12:42 PM

Nice truck and progress. I wish I was at you place in the build.

Hollywood Knight · 07-02-2010, 09:40 PM

Quote:

Originally Posted by b&a72

Project looks good! Where in Mesa are you?

Val Vista and Brown

Hollywood Knight · 07-02-2010, 09:42 PM

Quote:

Originally Posted by VA72C10

definitely bag the rear...the truck deserves it

Your wright she does maybe ill bye the bags this weekend

05-21-2010, 09:59 PM	#102
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Project " Melting Pot" installed bedside and glass today Attached Images

05-21-2010, 10:01 PM	#103
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project " Melting Pot" Nice progress!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-21-2010, 11:13 PM	#105
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project " Melting Pot" So the booster seems fine now that you adjusted the pedal nut? I have been eyeballing one of these for awhile now and I may go ahead and get one.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-23-2010, 09:15 PM	#109
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Project " Melting Pot" cut the bed rail to clear the blazer tank and put the bed on the truck. not good it has to much of a rake . i could go another 2" in the back end. Attached Images

05-24-2010, 12:18 AM	#110
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Project " Melting Pot" any pics of 4/6 or 5/7 drops ? i think the rear springs are 5" on my truck and thought they were 6" drop hmmmm.

05-24-2010, 12:19 AM	#111
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Project " Melting Pot" I want to run 18s and 20s

05-26-2010, 07:38 PM	#112
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Project " Melting Pot" my friend Kyle came over today with a coys 20" for the front to see how they would fit and man they looked good. 22s for the rear with a 7" drop should be just right. now I need to come up with the cash. Attached Images

05-26-2010, 08:12 PM	#113
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Project " Melting Pot" Wow looking great!!

05-26-2010, 09:43 PM	#114
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project " Melting Pot" yep, that'll work __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-26-2010, 10:38 PM	#115
sergio rios Registered User Join Date: Jul 2007 Location: pearland texas Posts: 11	Re: Project " Melting Pot" truck looks great. what kind of paint is that,what is the color code and brand,, __________________ meloyelo

06-10-2010, 12:52 AM	#116
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Project " Melting Pot" just waiting on some parts to keep this project going. should have some pics this week once they get here.

06-25-2010, 10:40 PM	#117
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Project " Melting Pot" new wheels and tires today. door paint doesn't match can you tell hmmm. Attached Images

06-26-2010, 07:07 PM	#118
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Project " Melting Pot" One step forward two steps back . looks like the truck will be bagged in the rear . the front looks good but what do I know . still to much of a rack for me so I might have some parts for sale.

06-26-2010, 09:13 PM	#119
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Project " Melting Pot" Project looks good! Where in Mesa are you?

06-30-2010, 09:14 PM	#121
kyle4381 Senior Member Join Date: Nov 2005 Location: AZ Posts: 416	Re: Project " Melting Pot" Get those bags installed... Looks good Nice Rims..



Register or Log In To remove these advertisements.

07-01-2010, 12:04 PM	#122
uno67 Registered User Join Date: Mar 2003 Location: Tucson, Az Posts: 185	Re: Project " Melting Pot" don't start selling parts just yet. as you lower the back the front will come up a bit might balance it self out. very nice truck keep grinding away.

07-01-2010, 12:42 PM	#123
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project " Melting Pot" Nice truck and progress. I wish I was at you place in the build. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

Register or Log In To remove these advertisements.