Project 67 DRGNWGN - 67 Burban!! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

19723DR · 01-17-2010, 02:44 AM

Great job Kevin.

About that last piece, find a large telephone pole and wrap it around till you get the right shape. I know of a guy that made a dash that way.

**Hart_Rod** · 01-17-2010, 10:42 AM

Good progress. Keep plugging away....

.

**kev2809** · 01-17-2010, 12:19 PM

Quote:

Originally Posted by 19723DR

Great job Kevin.

About that last piece, find a large telephone pole and wrap it around till you get the right shape. I know of a guy that made a dash that way.

didnt think of that one. my father in law has some light poles laying in his yard too lol

Quote:

Originally Posted by Hart_Rod

Good progress. Keep plugging away....

.

thanks for the pics!

**FRENCHBLUE72** · 01-17-2010, 05:03 PM

Keep at her she'll be done before ya know it..

**kev2809** · 01-18-2010, 10:58 PM

almost got the patch welded up today. still have some more grinding and welding to do...it actually turned out to be 3 pieces lol

i do have a question though...i think all my doors pop out at the bottom. the gap is perfect up until about where the door handle is...then it start popping out and is kinda bad at the bottom corner. does anyone know why its like that and how to fix them?

VA72C10 · 01-18-2010, 11:08 PM

could be a weak hinge or just a hinge adjustment/shim needed.

**kev2809** · 01-18-2010, 11:28 PM

hmm..ima have check on that. im getting ready to fix my rockers in the next week or so i might have to fix that soon

**kev2809** · 01-25-2010, 06:54 PM

well i got something done lately. i finished up the area behind the 3rd door...and also made a strip that i welded along the bottom to give it that original pinch weld look.

then i moved on to the driver side to fix the area that needs a wheel arch indention. unfortunately, the blazer piece i bought did not work. the curves are not the same. i didnt figure this out until after i cut out the area on suburban lol. but no biggie, i just welded it back on, and i did use a small piece by the body line that i screwed up the first time i did this (it was first time welding ever when i did that piece)...so it wasnt a total waste of time.

now im still in the hole on how to figure out how to get a body line in there lol. there is no way its gonna stay like that, it will bother me every time i look at it. so we gotta brainstorm here guys...

**kev2809** · 01-25-2010, 06:59 PM

today i started on the passenger side rocker. im doing it with the door on right now, and i actually got it off lol. the problem is that i need the part behind the rocker by the fender...so no repairing right now. i followed rokcrln's how to on this...

my backing plate is good so its gonna stay. can someone tell me the name of this part? i want to order it today so i can finish up this rocker by the end of the week!

mcbassin · 01-25-2010, 07:49 PM

Quote:

Originally Posted by kev2809

can someone tell me the name of this part? i want to order it today so i can finish up this rocker by the end of the week

Although I don't know if a burb is the same as a truck, I think the part you are looking for is #7 front pillar HERE

**kev2809** · 01-25-2010, 08:43 PM

that looks like it! i wonder though, it looks like half of what i have. is this piece suppose to be cut it in half and welded to the other half? mine looks like i have 4 bolt holes total...

mcbassin · 01-25-2010, 09:24 PM

Quote:

Originally Posted by kev2809

that looks like it! i wonder though, it looks like half of what i have. is this piece suppose to be cut it in half and welded to the other half? mine looks like i have 4 bolt holes total...

The other half is the fender mount (#5) on the same page at least I think. There are 2- 3/8" bolts that hold it together and it is spotwelded togther.
For your reference Here More is where I changed the same parts on mine.

**kev2809** · 01-25-2010, 09:36 PM

well...this is what i mean. on yours, it looks like there is enough room on the side to drill the holes for the original bolts, if the new piece didnt have it. on the ones im looking at, it doesnt have any room at all. here is a driver side replacement piece..

doesnt look like any room on the side closest to the door for the 2 original holes.

my67chevytruck · 01-25-2010, 11:31 PM

hmm weird, i bought mine from lmc and it had enough room to drill the holes...

i just remembered there was not much meat to bite too, i did spot weld and plug weld(not picture) and i did use a bigger washer to bite..

**kev2809** · 01-25-2010, 11:45 PM

well i guess its not that big of a deal, i can spot weld it in instead of using the screws...i just thought it looked weird. did you replace the back piece too on yours?

my67chevytruck · 01-25-2010, 11:52 PM

yeah i had to patch some of the floor inner kick panel, inner rocker and outer rocker. you can see the first page of the build thread for the carnage...

also i see alot of people plug welding instead of using bolts. I believe kevin even did this on his rocker replacement 101 ( i was skeered to weld that section solid, as i wanted to make sure all lined up first)

threeonthetree · 01-26-2010, 10:34 AM

great looking build
keep at her!

Slick67 · 01-26-2010, 11:00 AM

Hey Kevin! Looking good bro! Looks like you are gonna be ready for TexMex, well......in the Under Construction area by me!!!

mcbassin · 01-26-2010, 01:54 PM

Hmmmm? Maybe the burbs are different?

**kev2809** · 01-26-2010, 07:16 PM

Quote:

Originally Posted by threeonthetree

great looking build
keep at her!

thanks!

Quote:

Originally Posted by Slick67

Hey Kevin! Looking good bro! Looks like you are gonna be ready for TexMex, well......in the Under Construction area by me!!!

lol. tex mex is creeping up on me way to fast man!

Quote:

Originally Posted by mcbassin

Hmmmm? Maybe the burbs are different?

well i thought so too until i seen the ones from ece...

i think i might just order from them...

**kev2809** · 01-28-2010, 06:26 PM

and they are on back order lol..i think im gonna order them anyways. there is a few things i can work on while i wait.

im gonna start cutting out the crossmember and getting the frame ready for the notch. question though...i only remove the crossmember in front of the axle right? the one next to the tank stays? i tried sliding it over the frame and it looks like just the front one has to come off. any tips appreciated!

*project 67 sub* · 01-28-2010, 11:19 PM

you'll most likely have to trim the notch like i did on mine to leave the the rear cross member their, and have the notch centered over the axle.

edit: here's a couple old pics of mine so you can kind of see what I'm talking about

Name: 111.jpg
Views: 2690
Size: 43.6 KB

Slick67 · 01-29-2010, 11:26 AM

That is a lot of work Kev. Too bad you don't live a little closer I could help you some. Looking good bro, keep it up!

**kev2809** · 01-31-2010, 12:13 AM

Quote:

Originally Posted by project 67 sub

you'll most likely have to trim the notch like i did on mine to leave the the rear cross member their, and have the notch centered over the axle.

ya i might have to, i finally got mine out but no pics yet. im cleanin up the frame now, getting the bump stop brackets off etc.

Quote:

Originally Posted by Slick67

That is a lot of work Kev. Too bad you don't live a little closer I could help you some. Looking good bro, keep it up!

lol, its cool. ill get stuff finished one way or another!

look what i picked up today from craigslist...

guy said it was a 78 305 but i havent ran the numbers yet. needs a carb and dizzy (i have a new dizzy). has 35k miles on rebuild

gave me headers and a chrome alternator bracket for free too..

*1sik52* · 01-31-2010, 12:26 AM

Hey Kev, Sorry that piece behind your driverside wheel didnt work. I have some A pillar patches. Which side do you need and i will send it to you.

01-17-2010, 02:44 AM	#101
19723DR Registered User Join Date: Oct 2007 Location: Salt Lake City Posts: 628	Re: Project 67 DRGNWGN - 67 Burban!! Great job Kevin. About that last piece, find a large telephone pole and wrap it around till you get the right shape. I know of a guy that made a dash that way. __________________ 72 Suburban 3 Door http://67-72chevytrucks.com/vboard/s...d.php?t=265728 family fun cruiser 71 Cheyenne Project http://67-72chevytrucks.com/vboard/s...d.php?t=299232 Almost finished 93 Silverado http://www.67-72chevytrucks.com/vboa...d.php?t=378258 Flamed, bagged, body dropped on 22's 98 Chevy short bed DD 97 Z71 3 Door 51 Suburban-S-10 swap "What other hot rod can you carry 7 of your friends in"

01-17-2010, 10:42 AM	#102
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Project 67 DRGNWGN - 67 Burban!! Good progress. Keep plugging away..... __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-17-2010, 05:03 PM	#104
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project 67 DRGNWGN - 67 Burban!! Keep at her she'll be done before ya know it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-18-2010, 10:58 PM	#105
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! almost got the patch welded up today. still have some more grinding and welding to do...it actually turned out to be 3 pieces lol i do have a question though...i think all my doors pop out at the bottom. the gap is perfect up until about where the door handle is...then it start popping out and is kinda bad at the bottom corner. does anyone know why its like that and how to fix them? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-18-2010, 11:08 PM	#106
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project 67 DRGNWGN - 67 Burban!! could be a weak hinge or just a hinge adjustment/shim needed. __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-18-2010, 11:28 PM	#107
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! hmm..ima have check on that. im getting ready to fix my rockers in the next week or so i might have to fix that soon __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-25-2010, 06:54 PM	#108
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! well i got something done lately. i finished up the area behind the 3rd door...and also made a strip that i welded along the bottom to give it that original pinch weld look. then i moved on to the driver side to fix the area that needs a wheel arch indention. unfortunately, the blazer piece i bought did not work. the curves are not the same. i didnt figure this out until after i cut out the area on suburban lol. but no biggie, i just welded it back on, and i did use a small piece by the body line that i screwed up the first time i did this (it was first time welding ever when i did that piece)...so it wasnt a total waste of time. now im still in the hole on how to figure out how to get a body line in there lol. there is no way its gonna stay like that, it will bother me every time i look at it. so we gotta brainstorm here guys... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-25-2010 at 06:56 PM.

01-25-2010, 06:59 PM	#109
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! today i started on the passenger side rocker. im doing it with the door on right now, and i actually got it off lol. the problem is that i need the part behind the rocker by the fender...so no repairing right now. i followed rokcrln's how to on this... my backing plate is good so its gonna stay. can someone tell me the name of this part? i want to order it today so i can finish up this rocker by the end of the week! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-25-2010 at 07:00 PM.

01-25-2010, 08:43 PM	#111
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! that looks like it! i wonder though, it looks like half of what i have. is this piece suppose to be cut it in half and welded to the other half? mine looks like i have 4 bolt holes total... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-25-2010, 09:36 PM	#113
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! well...this is what i mean. on yours, it looks like there is enough room on the side to drill the holes for the original bolts, if the new piece didnt have it. on the ones im looking at, it doesnt have any room at all. here is a driver side replacement piece.. doesnt look like any room on the side closest to the door for the 2 original holes. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-25-2010, 11:31 PM	#114
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project 67 DRGNWGN - 67 Burban!! hmm weird, i bought mine from lmc and it had enough room to drill the holes... i just remembered there was not much meat to bite too, i did spot weld and plug weld(not picture) and i did use a bigger washer to bite.. Attached Images __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 01-25-2010 at 11:39 PM.

01-25-2010, 11:45 PM	#115
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! well i guess its not that big of a deal, i can spot weld it in instead of using the screws...i just thought it looked weird. did you replace the back piece too on yours? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-25-2010, 11:52 PM	#116
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project 67 DRGNWGN - 67 Burban!! yeah i had to patch some of the floor inner kick panel, inner rocker and outer rocker. you can see the first page of the build thread for the carnage... also i see alot of people plug welding instead of using bolts. I believe kevin even did this on his rocker replacement 101 ( i was skeered to weld that section solid, as i wanted to make sure all lined up first) Attached Images __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 01-25-2010 at 11:55 PM.

01-26-2010, 10:34 AM	#117
threeonthetree Registered User Join Date: Feb 2009 Location: Wausau, WI Posts: 975	Re: Project 67 DRGNWGN - 67 Burban!! great looking build keep at her! __________________ Smoking Tires Since 1992 1969 c10 AKA SIN 1985 SSWB TRAZER (super short wheel base)

01-26-2010, 11:00 AM	#118
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Hey Kevin! Looking good bro! Looks like you are gonna be ready for TexMex, well......in the Under Construction area by me!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed" Last edited by Slick67; 01-26-2010 at 11:01 AM.



Register or Log In To remove these advertisements.

01-26-2010, 01:54 PM	#119
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project 67 DRGNWGN - 67 Burban!! Hmmmm? Maybe the burbs are different? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-28-2010, 06:26 PM	#121
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! and they are on back order lol..i think im gonna order them anyways. there is a few things i can work on while i wait. im gonna start cutting out the crossmember and getting the frame ready for the notch. question though...i only remove the crossmember in front of the axle right? the one next to the tank stays? i tried sliding it over the frame and it looks like just the front one has to come off. any tips appreciated! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-28-2010, 11:19 PM	#122
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Project 67 DRGNWGN - 67 Burban!! you'll most likely have to trim the notch like i did on mine to leave the the rear cross member their, and have the notch centered over the axle. edit: here's a couple old pics of mine so you can kind of see what I'm talking about Last edited by project 67 sub; 01-28-2010 at 11:29 PM.

01-29-2010, 11:26 AM	#123
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! That is a lot of work Kev. Too bad you don't live a little closer I could help you some. Looking good bro, keep it up! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

01-31-2010, 12:26 AM	#125
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project 67 DRGNWGN - 67 Burban!! Hey Kev, Sorry that piece behind your driverside wheel didnt work. I have some A pillar patches. Which side do you need and i will send it to you.

Register or Log In To remove these advertisements.