KS Now a 1970 C20, very original - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-31-2011, 01:12 PM

Pete, sure will

bollybib, Sorry about that. The chrome is being sold in the whoel group. I have 2 exhaust manifolds out there, both are same number, I'll get the number off them

Planetgetlow, here are pics of them, plastic is broke on male end of one and one of the females is cracked $26 shipped for them

Vintage Windmills · 05-28-2011, 12:03 AM

Randy, Whats the rust like in the front pass fender and door? Price on fender?

Jud

teeitup · 05-28-2011, 12:08 AM

Jud, no rust just a couple small dents on pass fender I put a couple pics of fender on this thread somewhere $60 for fender, $50 for door. I'm posting pics of gmc grills here in a bit. Thanks Randy

teeitup · 05-28-2011, 12:45 AM

Trevor, I have you down for rad support and outer grill

LandonL · 05-28-2011, 01:28 AM

How much for the radiator shroud shipped to 31211? Would the crack be repairable with a little fiberglass? Do you know if the shroud will mount w/ a 17" fan blade? Thanks!

Walts_restoration · 05-28-2011, 01:36 AM

what width are the rims? Are they double safety beaded? (if tires are dismounted i can easily tell)

**DeadheadNM** · 05-28-2011, 07:18 AM

Randy:

I'll take the mirrors. If you have better elbows let me know. PM cost w shipping to 87110 when you can. No hurry.

The step bumper with the KS plate is the type I want. Do you think this one would clean up good enough to be chromed? If so let me know how much you want for it.

Thanks again.

teeitup · 05-28-2011, 09:52 AM

LandonL, I'll measure opening to make sure. Yes it can be fixed pretty easily

Ryan, not sure but I can get a pic of the one thats flat. You'd be 4th in line on them

Pete, I'll look around for better arms. And check out bumper condition

Thanks Randy

sneezys72 · 05-28-2011, 12:00 PM

I may have missed it but I didn't see anything about the drivers side taillight trim. Don't need a show quality, but straight would be nice.

teeitup · 05-28-2011, 12:02 PM

Sorry i forgot to post about it, but its all beat up on this truck. Thanks Randy

sneezys72 · 05-28-2011, 12:50 PM

Cool thx. I'll keep looking.

48richard · 05-28-2011, 01:05 PM

Randy,
I still want the door panel chrome strips. Please pm Paypal address.
Thanks, Richard

**88JRFAN** · 05-28-2011, 05:06 PM

Hey Randy. Is there any chance you might want to sell one of the gas doors?

Walts_restoration · 05-28-2011, 08:00 PM

Well if it isn't my turn by saturday ill probably pass on em lol. I forgot to come back for the radio. Ill be up there saturday. I work till noon then change and head your way.
Posted via Mobile Device

Vintage Windmills · 05-28-2011, 09:21 PM

Randy, can you give me more details on the pass door condition? I'll take the fender.

rich67 · 05-29-2011, 12:10 AM

randy i'll take the lighter assembly and lighter to 62312. will pm address. still interested in rims if gets to me. be pickup. what was price on rear bumper didnt see it? and were the cowl emblems sold? thanx rich

**lolife99** · 05-29-2011, 12:23 AM

Paypal sent for my $150 worth.
Thanks.

teeitup · 05-29-2011, 10:42 AM

Daren, I'll let you know

Rich, no lighter in this truck just assembly and wiring. I'll give the otehr guy till tonight to let me know on rims. He hasn't been on here for a few days. There was only one Dick Handy emblem, waiting to hear back from 1st guy on them

Keith, THANKS, I'll get shipped out either this week or first of next week for sure

Thanks Randy

Vintage Windmills · 05-30-2011, 09:55 AM

Randy, Thats ok, I think I'll pass for now. Maybe I'll still pick it up when I'm there if you still have it and I haven't spent all my money on gas!. I'll paypal you for the fender shortly. Looking like later in the day June 18th (sat) when I'll be there if thats ok. Thanks,

Jud

eagleuh1 · 05-30-2011, 11:43 AM

Dang, I'll have to pass on the wheels. I just put new tires-16 inch on my truck back in March. Can't afford 16.5 tires now. Great deal on some very nice wheels, and close to me too. Thanks for the pics. If you ever find some 16 inch 8 lugs I'll be there. Jim

teeitup · 05-30-2011, 10:58 PM

Jud, got your money Thanks

Jim, no problem, Thanks

Take care, Randy

teeitup · 05-30-2011, 11:00 PM

Guys if I've pm'd you about your totals I need to know if your still wanting the parts. I've seen most of you have been on the board since I did all my pm'ing. Thanks please let me know, Randy

rich67 · 05-30-2011, 11:36 PM

Quote:

Originally Posted by teeitup

Guys if I've pm'd you about your totals I need to know if your still wanting the parts. I've seen most of you have been on the board since I did all my pm'ing. Thanks please let me know, Randy

hey randy sorry been out all day. pass on wheels sir. will take bumper. gonna wait til 2moro to paypal so i can get to bank first. if thats cool with you. thanx rich

**DeadheadNM** · 05-31-2011, 07:15 AM

Randy:

Will send PM re: mirrors and bumper. Here's a pic of the emblem I mentioned.

Thanks again for your help.

Pete

teeitup · 05-31-2011, 07:40 AM

Rich, no worries with you

Pete, IMO you better hold off for a better set of mirrors. I'll look for a emblem next week for you

Thanks Randy

05-31-2011, 01:12 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original Pete, sure will bollybib, Sorry about that. The chrome is being sold in the whoel group. I have 2 exhaust manifolds out there, both are same number, I'll get the number off them Planetgetlow, here are pics of them, plastic is broke on male end of one and one of the females is cracked $26 shipped for them Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-28-2011, 12:03 AM	#2
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now a 1970 C20, very original Randy, Whats the rust like in the front pass fender and door? Price on fender? Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-28-2011, 12:08 AM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original Jud, no rust just a couple small dents on pass fender I put a couple pics of fender on this thread somewhere $60 for fender, $50 for door. I'm posting pics of gmc grills here in a bit. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-28-2011, 12:45 AM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original Trevor, I have you down for rad support and outer grill __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-28-2011, 01:28 AM	#5
LandonL Registered User Join Date: Nov 2009 Location: Georgia Posts: 440	Re: Now a 1970 C20, very original How much for the radiator shroud shipped to 31211? Would the crack be repairable with a little fiberglass? Do you know if the shroud will mount w/ a 17" fan blade? Thanks! __________________ ---\| 1967 GMC Stepside \|-- 250 L6 .030 over ---\| 1985 Porsche 944/1 \|--- Build Thread: '67 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=378640

05-28-2011, 01:36 AM	#6
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Now a 1970 C20, very original what width are the rims? Are they double safety beaded? (if tires are dismounted i can easily tell) __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

05-28-2011, 07:18 AM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,343	Re: Now a 1970 C20, very original Randy: I'll take the mirrors. If you have better elbows let me know. PM cost w shipping to 87110 when you can. No hurry. The step bumper with the KS plate is the type I want. Do you think this one would clean up good enough to be chromed? If so let me know how much you want for it. Thanks again. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-28-2011, 09:52 AM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original LandonL, I'll measure opening to make sure. Yes it can be fixed pretty easily Ryan, not sure but I can get a pic of the one thats flat. You'd be 4th in line on them Pete, I'll look around for better arms. And check out bumper condition Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-28-2011, 12:00 PM	#9
sneezys72 Registered User Join Date: Nov 2000 Location: Glendale Az Posts: 73	Re: Now a 1970 C20, very original I may have missed it but I didn't see anything about the drivers side taillight trim. Don't need a show quality, but straight would be nice.

05-28-2011, 12:02 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original Sorry i forgot to post about it, but its all beat up on this truck. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-28-2011, 12:50 PM	#11
sneezys72 Registered User Join Date: Nov 2000 Location: Glendale Az Posts: 73	Re: Now a 1970 C20, very original Cool thx. I'll keep looking.

05-28-2011, 01:05 PM	#12
48richard Registered User Join Date: Oct 2009 Location: Phoenix, AZ Posts: 475	Re: Now a 1970 C20, very original Randy, I still want the door panel chrome strips. Please pm Paypal address. Thanks, Richard __________________ 1971 C10 Longbed, 350/TH350

05-28-2011, 05:06 PM	#13
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Now a 1970 C20, very original Hey Randy. Is there any chance you might want to sell one of the gas doors? __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

05-28-2011, 08:00 PM	#14
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: Now a 1970 C20, very original Well if it isn't my turn by saturday ill probably pass on em lol. I forgot to come back for the radio. Ill be up there saturday. I work till noon then change and head your way. Posted via Mobile Device __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

05-28-2011, 09:21 PM	#15
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now a 1970 C20, very original Randy, can you give me more details on the pass door condition? I'll take the fender. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6



Register or Log In To remove these advertisements.

05-29-2011, 12:10 AM	#16
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Now a 1970 C20, very original randy i'll take the lighter assembly and lighter to 62312. will pm address. still interested in rims if gets to me. be pickup. what was price on rear bumper didnt see it? and were the cowl emblems sold? thanx rich Last edited by rich67; 05-29-2011 at 08:42 AM.

05-29-2011, 12:23 AM	#17
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,690	Re: Now a 1970 C20, very original Paypal sent for my $150 worth. Thanks. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

05-29-2011, 10:42 AM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original Daren, I'll let you know Rich, no lighter in this truck just assembly and wiring. I'll give the otehr guy till tonight to let me know on rims. He hasn't been on here for a few days. There was only one Dick Handy emblem, waiting to hear back from 1st guy on them Keith, THANKS, I'll get shipped out either this week or first of next week for sure Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-30-2011, 09:55 AM	#19
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Now a 1970 C20, very original Randy, Thats ok, I think I'll pass for now. Maybe I'll still pick it up when I'm there if you still have it and I haven't spent all my money on gas!. I'll paypal you for the fender shortly. Looking like later in the day June 18th (sat) when I'll be there if thats ok. Thanks, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-30-2011, 11:43 AM	#20
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Now a 1970 C20, very original Dang, I'll have to pass on the wheels. I just put new tires-16 inch on my truck back in March. Can't afford 16.5 tires now. Great deal on some very nice wheels, and close to me too. Thanks for the pics. If you ever find some 16 inch 8 lugs I'll be there. Jim

05-30-2011, 10:58 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original Jud, got your money Thanks Jim, no problem, Thanks Take care, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-30-2011, 11:00 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original Guys if I've pm'd you about your totals I need to know if your still wanting the parts. I've seen most of you have been on the board since I did all my pm'ing. Thanks please let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-31-2011, 07:15 AM	#24
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,343	Re: Now a 1970 C20, very original Randy: Will send PM re: mirrors and bumper. Here's a pic of the emblem I mentioned. Thanks again for your help. Pete Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-31-2011, 07:40 AM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Now a 1970 C20, very original Rich, no worries with you Pete, IMO you better hold off for a better set of mirrors. I'll look for a emblem next week for you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.