VT cutting up a 72 k5 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72k5zl1** · 08-06-2013, 11:32 PM

just getting in. been on road since 6:30 this am. my wife and kids took me over sunday. have a bucket loader coming to shop tomorrow to haul tub to garage door where my guy can get at it with the plasma cutter. sorry again the days have not been long enough.

Dale99 · 08-07-2013, 03:28 PM

Did it have the 4 covers that go over the hinges on the hatch? Or are you sending them with the top?

**72k5zl1** · 08-08-2013, 10:48 PM

just walked in. loader showed up so i can move it to shop door. shooting for sat am to cut and post. wife and kids are out of town and work wont let me get anymore ot.

1972K20 · 08-08-2013, 11:01 PM

sounds good

tom7254 · 08-09-2013, 07:05 PM

I'll check with you sat on the 1x1 foot cut

**71blksuper4x4** · 08-11-2013, 09:34 AM

Glen, how did it go for getting parts off? Trevor
Posted via Mobile Device

**72k5zl1** · 08-11-2013, 05:08 PM

sorry again! i'm bad at this. i need a clone to take care of everything on my plate outside of work. the hard part is done. its by the door so it will cut up quick. i have a list for my guy to cut tomorrow. i will check back before lunch and give him more after that.

**71blksuper4x4** · 08-11-2013, 07:55 PM

Glen, still down for the rear tail pan and a little floor above it and also the hickey tire carrier pieces. Trevor
Posted via Mobile Device

**72k5zl1** · 08-13-2013, 06:28 AM

chet cut on it yesterday for a few hours. hopefully today he will have the rocker boxes out and the rise in the floor behind driver/pass seat today

**chewysask** · 08-13-2013, 08:43 AM

Did you cut out the renforcing plate for rearseat ?The vertical section behind the the seats 4 inches either side today.Carey

**72k5zl1** · 08-14-2013, 06:40 AM

some cut up. chet didnt come in yesterday it poured all am. hopfully he will get it the rest of the way today

cleszkie · 08-14-2013, 05:49 PM

I would still like to buy the single wall top lighting harness for $35. PLease let me know how you take payment. Lets close this deal. Thanks.

AHowe88 · 08-15-2013, 02:49 PM

Bumpers, grill or grill surround?

**72k5zl1** · 08-15-2013, 09:59 PM

think i have most of it cut up. boxing this weekend. sorry its taking so long. work and the two little ones take up all my time.

**72k5zl1** · 08-15-2013, 10:01 PM

$35 for harness. sour@comcast,net
no bumpers but have 70 and 72 grills.

AHowe88 · 08-15-2013, 10:07 PM

Quote:

Originally Posted by 72k5zl1

$35 for harness. sour@comcast,net
no bumpers but have 70 and 72 grills.

What condition is the 72 grill in? Any pics?

dansavo · 08-17-2013, 10:49 PM

looks like the rocker box reinforcements are visible. How do they look?
Thanks

**72k5zl1** · 08-18-2013, 03:29 PM

Quote:

Originally Posted by AHowe88

What condition is the 72 grill in? Any pics?

pretty rough.

cleszkie · 08-18-2013, 05:47 PM

Quote:

Originally Posted by 72k5zl1

$35 for harness. sour@comcast,net
no bumpers but have 70 and 72 grills.

$35 sent to your paypal account for wiring harness. Thanks.

I PM'd my shipping onfo.

dansavo · 08-18-2013, 06:15 PM

Here is the section of floor pan I was talking about, I need it up to the step up.
Thanks

Flint70step · 08-18-2013, 06:17 PM

do you have the med blue front fenders?

**72k5zl1** · 08-18-2013, 06:28 PM

Quote:

Originally Posted by Flint70step

do you have the med blue front fenders?

they are a little different blue. look back i think there is a nose pic.

**72k5zl1** · 08-18-2013, 06:27 PM

Quote:

Originally Posted by dansavo

Here is the section of floor pan I was talking about, I need it up to the step up.
Thanks

have it minus the back 4" where floor raises up. all seat mounts are there. email me an address and i can send bigger pics

**72k5zl1** · 08-18-2013, 06:52 PM

Quote:

Originally Posted by dansavo

Here is the section of floor pan I was talking about, I need it up to the step up.
Thanks

big pic emailed.

**72k5zl1** · 08-18-2013, 11:50 AM

boxing today and shipping tomorrow. rocker boxes are $100 each and $25 pr. cap. filler neck/vent with sheet metal to weld in truck bed $120. 1x1 floor patch $25? prices + shipping

08-06-2013, 11:32 PM	#1
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,609	Re: cutting up a 72 k5 just getting in. been on road since 6:30 this am. my wife and kids took me over sunday. have a bucket loader coming to shop tomorrow to haul tub to garage door where my guy can get at it with the plasma cutter. sorry again the days have not been long enough. __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

08-07-2013, 03:28 PM	#2
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: cutting up a 72 k5 Did it have the 4 covers that go over the hinges on the hatch? Or are you sending them with the top? __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

08-08-2013, 10:48 PM	#3
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,609	Re: cutting up a 72 k5 just walked in. loader showed up so i can move it to shop door. shooting for sat am to cut and post. wife and kids are out of town and work wont let me get anymore ot. __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

08-08-2013, 11:01 PM	#4
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 739	Re: cutting up a 72 k5 sounds good

08-09-2013, 07:05 PM	#5
tom7254 Registered User Join Date: Aug 2012 Location: stevensville Montana Posts: 71	Re: cutting up a 72 k5 I'll check with you sat on the 1x1 foot cut

08-11-2013, 09:34 AM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: cutting up a 72 k5 Glen, how did it go for getting parts off? Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-11-2013, 05:08 PM	#7
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,609	Re: cutting up a 72 k5 sorry again! i'm bad at this. i need a clone to take care of everything on my plate outside of work. the hard part is done. its by the door so it will cut up quick. i have a list for my guy to cut tomorrow. i will check back before lunch and give him more after that. Attached Images __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

08-11-2013, 07:55 PM	#8
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: cutting up a 72 k5 Glen, still down for the rear tail pan and a little floor above it and also the hickey tire carrier pieces. Trevor Posted via Mobile Device __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-13-2013, 06:28 AM	#9
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,609	Re: cutting up a 72 k5 chet cut on it yesterday for a few hours. hopefully today he will have the rocker boxes out and the rise in the floor behind driver/pass seat today __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

08-13-2013, 08:43 AM	#10
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: cutting up a 72 k5 Did you cut out the renforcing plate for rearseat ?The vertical section behind the the seats 4 inches either side today.Carey

08-14-2013, 06:40 AM	#11
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,609	Re: cutting up a 72 k5 some cut up. chet didnt come in yesterday it poured all am. hopfully he will get it the rest of the way today Attached Images __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

08-14-2013, 05:49 PM	#12
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: cutting up a 72 k5 I would still like to buy the single wall top lighting harness for $35. PLease let me know how you take payment. Lets close this deal. Thanks.

08-15-2013, 02:49 PM	#13
AHowe88 Registered User Join Date: Jul 2013 Location: Metrowest, MA Posts: 254	Re: cutting up a 72 k5 Bumpers, grill or grill surround?

08-15-2013, 09:59 PM	#14
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,609	Re: cutting up a 72 k5 think i have most of it cut up. boxing this weekend. sorry its taking so long. work and the two little ones take up all my time. Attached Images __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

08-15-2013, 10:01 PM	#15
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,609	Re: cutting up a 72 k5 $35 for harness. sour@comcast,net no bumpers but have 70 and 72 grills. __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/



Register or Log In To remove these advertisements.

08-17-2013, 10:49 PM	#17
dansavo Registered User Join Date: Sep 2011 Location: Vancouver, WA Posts: 41	Re: cutting up a 72 k5 looks like the rocker box reinforcements are visible. How do they look? Thanks

08-18-2013, 06:15 PM	#20
dansavo Registered User Join Date: Sep 2011 Location: Vancouver, WA Posts: 41	Re: cutting up a 72 k5 Here is the section of floor pan I was talking about, I need it up to the step up. Thanks

08-18-2013, 06:17 PM	#21
Flint70step Registered User Join Date: Jan 2011 Location: Lake Travis,Texas Posts: 586	Re: cutting up a 72 k5 do you have the med blue front fenders? __________________ 72 Cheyenne Super LWB 350/350 Factory A/C Tilt/Posi White/Med Red/White(on the way) 72 Custom Deluxe Burb(Arizona truck)Nice interior Great patina Project Patina Azul http://67-72chevytrucks.com/vboard/s...d.php?t=467668

08-18-2013, 11:50 AM	#25
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,609	Re: cutting up a 72 k5 boxing today and shipping tomorrow. rocker boxes are $100 each and $25 pr. cap. filler neck/vent with sheet metal to weld in truck bed $120. 1x1 floor patch $25? prices + shipping Attached Images __________________ my build threads, 68 pro touring, auto cross c10 (mid life crisis) http://67-72chevytrucks.com/vboard/s...d.php?t=464109 website http://www.sauersgarage.com/

Register or Log In To remove these advertisements.