OR 1971 K20 parts F/S

[RedRoad]

Yes still need them, let me know

[DLTruck1973]

Originally Posted by RedRoad

Ill get in line for some silver plugs actually only need 2

and need price on the upper lift gate supports once you start selling the burb parts

The upper gate supports are $42.00 shipped to your door. I also have two of the silver plugs you need for $1.00 each so $44.00 total

Let me know and I can get them ready to ship

Thank you,
Thomas

[RedRoad]

Sounds good shoot me your PP info

Thanks

[DLTruck1973]

Originally Posted by RedRoad

Sounds good shoot me your PP info

Thanks

Coming right up on a PM

Thank you,
Thomas

[RedRoad]

payment sent

Thanks

[DLTruck1973]

Originally Posted by RedRoad

payment sent

Thanks

Payment received, parts wil ship today

Thank you again for your business,
Thomas

[Jake1971]

I will take the inside mirror, pending close up pics of glass, shipped to 78602

[DLTruck1973]

Originally Posted by Jake1971

I will take the inside mirror, pending close up pics of glass, shipped to 78602

I will take some good close ups for you and post them soon.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by Jake1971

I will take the inside mirror, pending close up pics of glass, shipped to 78602

Here are some close ups of the mirror for you.

Let me know. Should be no more than $10.00 to ship. $30.00 total

Thank you for the interest,
Thomas

[Jake1971]

Originally Posted by DLTruck1973

Here are some close ups of the mirror for you.

Let me know. Should be no more than $10.00 to ship. $30.00 total

Thank you for the interest,
Thomas

Thank you for the pics, but this one looks as cloudy as mine. Thanks anyways.

[DLTruck1973]

Originally Posted by Jake1971

Thank you for the pics, but this one looks as cloudy as mine. Thanks anyways.

Not a problem. If I run across a better one, I will keep you in mind.

Have a good weekend,
Thomas

[teds72]

could I get pictures of
Bell crank with pivot stud on block, frame bracket, rod to fork...30.00
Under dash wiring harness 4sp/gauges very nice...65.00
Engine harness (for manual trans) bad ends on starter and temp... 20.00
Do You have another floor shift steering colum
Thanks Ted shipping to 47720

[DLTruck1973]

Originally Posted by teds72

could I get pictures of
Bell crank with pivot stud on block, frame bracket, rod to fork...30.00
Under dash wiring harness 4sp/gauges very nice...65.00
Engine harness (for manual trans) bad ends on starter and temp... 20.00
Do You have another floor shift steering colum
Thanks Ted shipping to 47720

I will be sure to get you good photos of everything on your list on Monday. I should have another floor shift column for you but have to check.

Thank you for the interest,
Thomas

[bluek5]

Would you sell the emergency brake assembly minus the front cable?
Emergency brake cables (front cable, interm.cable, frame brackets, support rods, and couplers)...75.00

Thanks, Paul

[DLTruck1973]

Originally Posted by bluek5

Would you sell the emergency brake assembly minus the front cable?
Emergency brake cables (front cable, interm.cable, frame brackets, support rods, and couplers)...75.00

Thanks, Paul

Paul, let me get to the shop on Monday and see what I can do to meet your needs. I have other e-brake parts other than these.

So all you need is the intermediate cable and all of the supports, frame brackets and couplers?

I will let you know on Monday.

Thank you for the interest,
Thomas

[bluek5]

Originally Posted by DLTruck1973

Paul, let me get to the shop on Monday and see what I can do to meet your needs. I have other e-brake parts other than these.

So all you need is the intermediate cable and all of the supports, frame brackets and couplers?

I will let you know on Monday.

Thank you for the interest,
Thomas

Thomas,
I need to crawl under the truck and look. I think that I only need the intermediate cable and whatever attachés it to the frame. I have the couplers.
Thanks, Paul

[DLTruck1973]

Originally Posted by bluek5

Thomas,
I need to crawl under the truck and look. I think that I only need the intermediate cable and whatever attachés it to the frame. I have the couplers.
Thanks, Paul

Sounds good Paul, just let me know.

Thank you,
Thomas

[lucky71gmc]

I have a 1972 chev 1/2 4 X 4 frame with a 1970 GMC cab and front clip off a two wheel drive, looking for a drivers side front spring hanger/ core support bracket. I don't know if the 3/4 4 X 4 is the correct part. Inspection cover is that the transmission tunnel? My drive train is the 350 transmission with a 205 transfer case. Looking for a medium to high hump tunnel. Currently the flat cab floor clears the automatic transmission, but I don't have my transfer case shifter lever installed due to no hole in the floor.

[DLTruck1973]

Originally Posted by lucky71gmc

I have a 1972 chev 1/2 4 X 4 frame with a 1970 GMC cab and front clip off a two wheel drive, looking for a drivers side front spring hanger/ core support bracket. I don't know if the 3/4 4 X 4 is the correct part. Inspection cover is that the transmission tunnel? My drive train is the 350 transmission with a 205 transfer case. Looking for a medium to high hump tunnel. Currently the flat cab floor clears the automatic transmission, but I don't have my transfer case shifter lever installed due to no hole in the floor.

I should have the 1/2 spring hanger for you but will have to check.

The inspection cover fits/mounts between the engine and transmission. It is under the truck and is half moon shaped.

I may have a automatic 4 x 4 high hump but need to check on that Monday is well.

I can let you know tomorrow what I have and prices.

Thank you for the interest,
Thomas

[bluek5]

Originally Posted by DLTruck1973

Sounds good Paul, just let me know.

Thank you,
Thomas

Thomas,
So in looking around I have come up with everything except the intermediate cable. If you have just a cable for a 3/4 ton 4x4 get me a price shipped to 84043.
Thanks, Paul

[Tdrcreyn4]

Was this a K20 disc brake truck and if so what do you have left of those parts with shipping to 30068

[DLTruck1973]

Originally Posted by Tdrcreyn4

Was this a K20 disc brake truck and if so what do you have left of those parts with shipping to 30068

Can you give me a breakdown of exactly what you need? Then I can give you itemized prices and a correct shipping quote.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by bluek5

Thomas,
So in looking around I have come up with everything except the intermediate cable. If you have just a cable for a 3/4 ton 4x4 get me a price shipped to 84043.
Thanks, Paul

Hi Paul,

Sorry but I do not have any loose intermediate cables at this time.

Thank you for the interest.

Thomas

[DLTruck1973]

Originally Posted by lucky71gmc

I have a 1972 chev 1/2 4 X 4 frame with a 1970 GMC cab and front clip off a two wheel drive, looking for a drivers side front spring hanger/ core support bracket. I don't know if the 3/4 4 X 4 is the correct part. Inspection cover is that the transmission tunnel? My drive train is the 350 transmission with a 205 transfer case. Looking for a medium to high hump tunnel. Currently the flat cab floor clears the automatic transmission, but I don't have my transfer case shifter lever installed due to no hole in the floor.

I do have a drivers side front spring mount with core support bracket for $40.00 plus shipping. I also have a automatic 4x4 floor hump for $75.00. I will have to pull it from a truck.

If you give me a zip code, I can get a shipping quote if interested.

Let me know,
Thank you,
Thomas

[1972 Jimmy]

Thomas,
Recieved the Bumper brackets and Radiator tube this afternoon. Wow are they nice!! Very impressed!

Thanks again,
Eric

Originally Posted by DLTruck1973

Hi Eric,

$20.00 for shipping.

The brackets are $36.00 for the pair and $85.00 for the radiator pipe. All total with shipping is $141.00. Let me know and I can get them ready to ship.

Thank you,
Thomas