OR parting out 1970 C10 CST - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rusty knuckles 5 · 03-30-2013, 11:31 AM

Hi! its a 1972 chevy k/20 thanks

**DeadheadNM** · 03-30-2013, 12:53 PM

Tom in addn to the woodgrain door moldings from this truck any chance you have:

1) a metal gas pump to carb line
2) a good OEM 2wd fan shroud
3) and/or a rusty metal 4wd upper rad hose that I can chop the ends off of?

Thanks - Pete

**tll74** · 03-30-2013, 01:14 PM

Quote:

Originally Posted by rusty knuckles 5

Hi! its a 1972 chevy k/20 thanks

I just bought a 72 with a bad booster. I'll do the bracket for 12.50 shipped.

Quote:

Originally Posted by TripleNickel

PM and PayPal both sent.

Thanks Wayne, I'll let you know on the brake lines.

Quote:

Originally Posted by DeadheadNM

Tom in addn to the woodgrain door moldings from this truck any chance you have:

1) a metal gas pump to carb line
2) a good OEM 2wd fan shroud
3) and/or a rusty metal 4wd upper rad hose that I can chop the ends off of?

Thanks - Pete

Pete, Just sent you PM on the trim.
What year on the line? Or just one that would fit a Q-jet?
Yes on the shroud for a 2wd. 40.00 for a nice one. Plus shipping. I shipped one out the other day and it was about 16.00.
No upper at this time. I think you got the last one I had.d

Thanks, Tom

**DeadheadNM** · 03-30-2013, 02:08 PM

Tom: Q-jet line for a 72 and I'll take the shroud if OEM and nice (shipping to 87110). LMK if you have the Q-jet line when you can. Will use the shroud in my K20 - think I'll need the shorter 2wd version as I moved the motor forward for the 700R4 install. Pete

henson546 · 03-30-2013, 03:19 PM

Hello I am looking for the interior heater box part shown in my attachment.
Thanks

rusty knuckles 5 · 03-30-2013, 10:35 PM

Hi ! I went in to town today and stopped at pick n pull and i got one off a truck thanks for the reply. Rod

**tll74** · 03-31-2013, 02:35 AM

Quote:

Originally Posted by DeadheadNM

Tom: Q-jet line for a 72 and I'll take the shroud if OEM and nice (shipping to 87110). LMK if you have the Q-jet line when you can. Will use the shroud in my K20 - think I'll need the shorter 2wd version as I moved the motor forward for the 700R4 install. Pete

Pete, Yes the shroud is OEM and nice. I'll check for the fuel line. Thanks

Quote:

Originally Posted by henson546

Hello I am looking for the interior heater box part shown in my attachment.
Thanks

Sorry, I don't have any AC setups that I'm parting out.

Quote:

Originally Posted by rusty knuckles 5

Hi ! I went in to town today and stopped at pick n pull and i got one off a truck thanks for the reply. Rod

Good deal gota luv those pick n pull's.

stringbean1073 · 04-09-2013, 03:41 AM

are the P/s brackets taken? i need some for the short water pump 350.

**tll74** · 04-09-2013, 08:34 PM

Quote:

Originally Posted by stringbean1073

are the P/s brackets taken? i need some for the short water pump 350.

Sorry, no loose brackets at this time. Complete pump assembly 50.00 plus shipping. Thanks, Tom

stringbean1073 · 04-09-2013, 10:21 PM

Quote:

Originally Posted by tll74

Sorry, no loose brackets at this time. Complete pump assembly 50.00 plus shipping. Thanks, Tom

Ill take it, pm me with info and shipping cost

JimH2828 · 04-09-2013, 08:49 PM

Tom, I could use the below parts if you have them.........pics and price please.

1) Rear 11" drum brake - strut bar with spring
- sometimes called drum brake bar, need driver and pass side (may be same).
- strut bar length is 7 3/4"
http://www.pbase.com/nufsed/image/49448862

2) Blazer rear bench seat hold down bracket.

Thanks
JimH2828

**tll74** · 04-09-2013, 09:27 PM

Quote:

Originally Posted by JimH2828

Tom, I could use the below parts if you have them.........pics and price please.

1) Rear 11" drum brake - strut bar with spring
- sometimes called drum brake bar, need driver and pass side (may be same).
- strut bar length is 7 3/4"
http://www.pbase.com/nufsed/image/49448862

2) Blazer rear bench seat hold down bracket.

Thanks
JimH2828

Jim, Just now catching up to you. It's been a crazy last 2 weeks. Did you get the air claener request taken care of? I don't see it in this post. Thanks, Tom

74baggedbug · 04-20-2013, 09:22 AM

How much for the grill shipped to 77536 thanks
Posted via Mobile Device

74baggedbug · 04-20-2013, 10:03 AM

Sorry didn't see that the grill sold thanks
Posted via Mobile Device

stringbean1073 · 04-20-2013, 02:59 PM

pm sent
Posted via Mobile Device

72CampSpecial · 04-20-2013, 03:46 PM

PM Sent for parts..

are the Chrome Trim pieces sold..? im looking for the upper chrome pieces for my '72 C20 Left and Right Side..will those pictured earlier work on a C20?

Also in need of a Drivers Side door latch..sping and lever broke off of mine!

sduckworth13 · 04-21-2013, 03:46 AM

Tom, would you happen to have a wood bed rear cross sill?

Thanks

**tll74** · 04-21-2013, 03:57 AM

Quote:

Originally Posted by 72CampSpecial

PM Sent for parts..

are the Chrome Trim pieces sold..? im looking for the upper chrome pieces for my '72 C20 Left and Right Side..will those pictured earlier work on a C20?

Also in need of a Drivers Side door latch..sping and lever broke off of mine!

PM sent

Quote:

Originally Posted by sduckworth13

Tom, would you happen to have a wood bed rear cross sill?

Thanks

I just bought a 68 Longhorn. It may have one but it will be awhile before I get to tearing it apart.

Thanks, Tom

sduckworth13 · 04-21-2013, 04:00 AM

Ok thanks Tom, will you let me know what kind of condition it is in when you get to it.

Thanks,
Scott

72CampSpecial · 05-07-2013, 03:59 PM

Door Latch received..THANKS looks great!!!

hvacfatboy · 05-08-2013, 11:01 AM

hey do you have the tailight sections both sides in good shape cut up past the side marker lights if so pm me price and shipping to 27583 thanks Richie

**TBONE1964** · 05-08-2013, 12:35 PM

Hey Tom,

Have you got any of the pot metal centers seperate from the wheel covers (71/72 style) in decent shape and how much? I am piecing together a set of 4.

Hope all is well there,

Thank you,
Tom

**tll74** · 05-09-2013, 01:16 AM

Quote:

Originally Posted by 72CampSpecial

Door Latch received..THANKS looks great!!!

Glad you like it. They do turn out nice.

Quote:

Originally Posted by hvacfatboy

hey do you have the tailight sections both sides in good shape cut up past the side marker lights if so pm me price and shipping to 27583 thanks Richie

I have sereral trucks lined up to part. Just finding time here lately to get to them has been a challenge. I'll keep you in mind as I get to them.

Quote:

Originally Posted by TBONE1964

Hey Tom,

Have you got any of the pot metal centers seperate from the wheel covers (71/72 style) in decent shape and how much? I am piecing together a set of 4.

Hope all is well there,

Thank you,
Tom

Hey Tom, all is well, thanks. Sorry the only caps of this style are the ones in this thread. Make me a offer on these...I just might take it. I bought three more trucks last weekend and could use some $$$.

Thanks, Tom

**TBONE1964** · 05-09-2013, 08:19 AM

Tom,

I am going to try to get back there in July. My schedule is crazy right now. If you still have the caps when I see you, I will take a look at them. I need the centers more than the whole cap but will take them as a whole if I like what I see. Also I need some sheet metal patches from you too.

Maybe I can plan a day when I am there to come down and give you a hand with parts. Good therapy for me.

Take care,
Tom

Orange1970 · 09-01-2014, 06:50 PM

Are the mirrors on this truck still available?

03-30-2013, 11:31 AM	#1
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: parting out 1970 C10 CST Hi! its a 1972 chevy k/20 thanks

03-30-2013, 12:53 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,357	Re: parting out 1970 C10 CST Tom in addn to the woodgrain door moldings from this truck any chance you have: 1) a metal gas pump to carb line 2) a good OEM 2wd fan shroud 3) and/or a rusty metal 4wd upper rad hose that I can chop the ends off of? Thanks - Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-30-2013, 02:08 PM	#4
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,357	Re: parting out 1970 C10 CST Tom: Q-jet line for a 72 and I'll take the shroud if OEM and nice (shipping to 87110). LMK if you have the Q-jet line when you can. Will use the shroud in my K20 - think I'll need the shorter 2wd version as I moved the motor forward for the 700R4 install. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-30-2013, 03:19 PM	#5
henson546 Registered User Join Date: Sep 2012 Location: Wentzville, MO Posts: 2	Re: parting out 1970 C10 CST Hello I am looking for the interior heater box part shown in my attachment. Thanks Attached Images

03-30-2013, 10:35 PM	#6
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: parting out 1970 C10 CST Hi ! I went in to town today and stopped at pick n pull and i got one off a truck thanks for the reply. Rod

04-09-2013, 03:41 AM	#8
stringbean1073 Registered User Join Date: Mar 2013 Location: shelbyville TN Posts: 53	Re: parting out 1970 C10 CST are the P/s brackets taken? i need some for the short water pump 350.

04-09-2013, 08:49 PM	#11
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: parting out 1970 C10 CST Tom, I could use the below parts if you have them.........pics and price please. 1) Rear 11" drum brake - strut bar with spring - sometimes called drum brake bar, need driver and pass side (may be same). - strut bar length is 7 3/4" http://www.pbase.com/nufsed/image/49448862 2) Blazer rear bench seat hold down bracket. Thanks JimH2828

04-20-2013, 09:22 AM	#13
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: parting out 1970 C10 CST How much for the grill shipped to 77536 thanks Posted via Mobile Device

04-20-2013, 10:03 AM	#14
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: parting out 1970 C10 CST Sorry didn't see that the grill sold thanks Posted via Mobile Device

04-20-2013, 02:59 PM	#15
stringbean1073 Registered User Join Date: Mar 2013 Location: shelbyville TN Posts: 53	Re: parting out 1970 C10 CST pm sent Posted via Mobile Device __________________ 1971 c10 custom

04-20-2013, 03:46 PM	#16
72CampSpecial Registered User Join Date: Nov 2012 Location: Tacoma, WA Posts: 133	Re: parting out 1970 C10 CST PM Sent for parts.. are the Chrome Trim pieces sold..? im looking for the upper chrome pieces for my '72 C20 Left and Right Side..will those pictured earlier work on a C20? Also in need of a Drivers Side door latch..sping and lever broke off of mine!

04-21-2013, 03:46 AM	#17
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: parting out 1970 C10 CST Tom, would you happen to have a wood bed rear cross sill? Thanks __________________ Scott

04-21-2013, 04:00 AM	#19
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: parting out 1970 C10 CST Ok thanks Tom, will you let me know what kind of condition it is in when you get to it. Thanks, Scott __________________ Scott

05-07-2013, 03:59 PM	#20
72CampSpecial Registered User Join Date: Nov 2012 Location: Tacoma, WA Posts: 133	Re: parting out 1970 C10 CST Door Latch received..THANKS looks great!!!

05-08-2013, 11:01 AM	#21
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: parting out 1970 C10 CST hey do you have the tailight sections both sides in good shape cut up past the side marker lights if so pm me price and shipping to 27583 thanks Richie



Register or Log In To remove these advertisements.

05-08-2013, 12:35 PM	#22
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: parting out 1970 C10 CST Hey Tom, Have you got any of the pot metal centers seperate from the wheel covers (71/72 style) in decent shape and how much? I am piecing together a set of 4. Hope all is well there, Thank you, Tom

05-09-2013, 08:19 AM	#24
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: parting out 1970 C10 CST Tom, I am going to try to get back there in July. My schedule is crazy right now. If you still have the caps when I see you, I will take a look at them. I need the centers more than the whole cap but will take them as a whole if I like what I see. Also I need some sheet metal patches from you too. Maybe I can plan a day when I am there to come down and give you a hand with parts. Good therapy for me. Take care, Tom

09-01-2014, 06:50 PM	#25
Orange1970 Registered User Join Date: Feb 2009 Location: Sauk City, WI Posts: 15	Re: parting out 1970 C10 CST Are the mirrors on this truck still available?

Register or Log In To remove these advertisements.