"Project Orangepeel" 52 A.D

[reaper71]

In this pic it shows the space between the adapter and rods so I will need to make a plate to take up the gap.

Mark...

[RockinKees]

Nice, very nice!!
Are you keeping it all steel?

[reaper71]

Thanks Kees.. To answer your ? No.. the wheel,pedals,shifter arm and interior panels will be painted wrinkle black..the theme I'm going with will tie them together,(more on that later)

Originally Posted by RockinKees

Nice, very nice!!
Are you keeping it all steel?

[reaper71]

This is the plate i made to take up the gap between the rods..

[reaper71]

These are a side view and fitting the plate and adapter..

[reaper71]

These are of spacing the plate/adp. to wheel and final weld of the pieces..


Mark...

[reaper71]

As you can see from this pic I have button head cap screws installed (i drilled all holes and tapped them) this will give a little grip
to the wheel..

[reaper71]

Here it shows the wheel after it was blasted and final welding. will start to smooth it out next..

[reaper71]

wheel all smoothed out

[Advanced Design]

Very cool Mark. Really like the button heads. The remaining holes are for looks / grip too?

[reaper71]

Thanks A.D. and yes they are once it is all painted with wrinkle black the holes will be re worked to show the metal then clear over them to prevent rust.

Originally Posted by Advanced Design

Very cool Mark. Really like the button heads. The remaining holes are for looks / grip too?

[reaper71]

This is going to be the idea I had for the center cap I'm using a cone for a wheel so here go's
the first pic is of the mounting spots i drilled and tapped holes and trimmed washers..

[reaper71]

This is the "U" I made this will be welded to the washers so it can be removed. The screw coming up is for the cone..

[reaper71]

"U plate " and cap

[reaper71]

The final product..
so how it works is the U plate is bolted to the wheel then the cone gets screwed on and that's it..
next up I will be working on my door latch Idea..


Mark

[reaper71]

Ok, those of you that have seen these latches from
trique mfg. know they are pretty salty in price so..I have decided to make my own..

Mark...

[reaper71]

So after some study of pics and trial and error I finally came up with the final design. using poster board for my templates I got them mostly figured out of how they need to work and transferred them to steel. the latches I'm using are a single catch style (it seems they don't need as much adjusting as dual) and are quieter as well. one company is (Rocky hinge) mine are U.S. made and are very well made. (do not use autoloc hinges they are junk) I paid 50.00 for them at a street rod nats in springfield.

[reaper71]

This is what the arm looks like after drilling and bending into shape..

[Advanced Design]

Originally Posted by reaper71

This is what the arm looks like after drilling and bending into shape..

Nice work! What thickness is the steel? 1/8"?

[reaper71]

Yes it is 1/8" I didn't want it flimsy..

Originally Posted by Advanced Design

Nice work! What thickness is the steel? 1/8"?

[reaper71]

O.E. hole for handle

[reaper71]

These are the plate I made of the O.E. hole before they were welded in and final look after metal finish..

Mark...

[69CST-V]

Nice work.....Like your do it yourself attitude. Keep up the good work.

[reaper71]

Thanks Bryce!! I try and make most things if I can I enjoy the fabrication challenge..

Originally Posted by 69CST-V

Nice work.....Like your do it yourself attitude. Keep up the good work.

[Green Valley Lawn]

Bad ass wheel nice work!metal: