Putnam

[Low Elco]

The factory ones are for a 4x10.

[flashed]

Low Elco ,thanks for that bit of info ,that helps .

[thelonerife]

Well my A/C quit cooling so the truck goes back to the shop tomorrow. If its something small I'll get it fixed, if not I'll be ordering a Vintage Air system. I've been busy getting my deck built and finishing up some things.

[aggie91]

Nice work on the deck. I like those accent lights on the posts.

[68Timber]

Looks good. I was reminded of the 'deck envy' skit Jeff Foxworthy did with the other blue collar comedians.

[rusty76]

Nice

[thelonerife]

Originally Posted by aggie91

Nice work on the deck. I like those accent lights on the posts.

Thanks me too. I had to replace the control twice. They just wouldn't work right. Finally got a good one.

Originally Posted by 68Timber

Looks good. I was reminded of the 'deck envy' skit Jeff Foxworthy did with the other blue collar comedians.

Yeah my buddy Josh sent that to me. My deck is big enough lol

Originally Posted by rusty76

Nice

Thanks Rusty76

[thelonerife]

Well the A/C problem turned out to be the compressor. He swapped it under warranty so no money spent on that. It is working good now. It fogged up the windows pretty good on the way home. I had it full blast too.

[thelonerife]

foggy & 53 degrees. It was only 77 degrees outside so the test comes when its 100 degrees. We'll see.

[thelonerife]

A little better in the morning.

[thelonerife]

I ordered a chest type tool box. I also bought some seam sealer for the bed. some of it is cracking up and missing. I may seal it and paint the bed but the weather hasn't been cooperating lately. It rains almost every evening except tonight. I hope its over.

[rusty76]

Cool tool box.

[Westwind]

Cool Truck. I like the center caps.Goodluck

[thelonerife]

Originally Posted by rusty76

Cool tool box.

Thanks Rusty

Originally Posted by Westwind

Cool Truck. I like the center caps.Goodluck

Thanks.

[thelonerife]

I got the bed seam sealed.

[thelonerife]

I got the rails painted and the rattle can liner on it. I just wanted to seal the bed before winter hits as I'm not covering the bed. It might look a little splotchy in the pics but its still wet. I will do some touch ups all over the truck to get rid of all the chips and rust spots.

[flashed]

The bed looks great .

[thelonerife]

Originally Posted by flashed

The bed looks great .

Thanks. I cranked the Led Zep Mothership and got busy.

[rusty76]

Looking good

[thelonerife]

I finally got around to putting the toolbox in the bed. I put in some captured nuts in the floor and mounted it. I left some room between the front bed panel and box so I could keep it clean back there. I like to keep the drain holes clear.

[thelonerife]

before and after

[JohnKimble]

Originally Posted by thelonerife

before and after

Night and day difference! Looking good.

[68Timber]

Bed looks great! Is that a roll-on bedliner?

[thelonerife]

Originally Posted by JohnKimble

Night and day difference! Looking good.

Thanks John

Originally Posted by 68Timber

Bed looks great! Is that a roll-on bedliner?

Its the rattle can rustoleum stuff.

[JohnKimble]

How many cans did it take you? Would you recommend it?