AL GIANT 60-66 parts Stash Barn Find!! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

villa 66 · 03-15-2012, 08:23 PM

How much for spotlight on pic 9 shipped to 78570? Thanks.

QBA · 03-15-2012, 11:36 PM

how much for the 64-66 windshield trim?
thanks

csa daddy · 03-16-2012, 01:03 PM

Did you get the pics for the brake booster I emailed an also what did you find out on the body trim I spoke with you about
Posted via Mobile Device

**GMCNUT** · 03-16-2012, 11:35 PM

Quote:

Originally Posted by villa 66

How much for spotlight on pic 9 shipped to 78570? Thanks.

Spotlight is 75.00 and will have to remove it to see what it weighs boxed to find out a shipping total, but probably around 10.00 to 12.00 I'd guess to ship

**GMCNUT** · 03-16-2012, 11:36 PM

Quote:

Originally Posted by QBA

how much for the 64-66 windshield trim?
thanks

Windshield trim is 100.00 + shipping. Can't say for sure what the shipping will be until its boxed, but its so light I would not expect over 10.00 to 12.00 or so

**GMCNUT** · 03-16-2012, 11:39 PM

Quote:

Originally Posted by csa daddy

Did you get the pics for the brake booster I emailed an also what did you find out on the body trim I spoke with you about
Posted via Mobile Device

We are removing all the chrome trim this weekend and packing it up - not sure which member said they were buying it - it was either you or one other guy I have to go back and look because everybody's online names run together when I have this many requests.....

I never got the booster shots but sent you a different email address to send them to

Biffsk8er · 03-17-2012, 01:58 AM

GMCNUT, Do you still have that '64-'66 Suburban (Carry All) steel grill with the headlight assemblies? I'm interested in buying it. I drive a '65 Suburban. I also see you have a suburban with the triangular tail lights; I am in need of those tail lens covers as well. If you still have them to sell, can you contact me with a price? If you no longer have them, would you let me down easy??

dodgiesdad · 03-17-2012, 08:09 AM

Would you happen to have a incomplete set of windshield trim? I am in need of one of the small pieces which covers the joints of the 4 large pieces. Also if Villa 66 does not take the spot light could I get some better pictures of it? I am curious if the overall condition of the light.

1965Project · 03-17-2012, 11:01 AM

I'm still interested in the door panels if you still have them. How much shipping to 35207?

bigdogboxers · 03-17-2012, 01:31 PM

Shot in the dark.. But I am looking for a automatic crossmember for 1960 61 62 short bed and I need a short bed automatic driveline any luck?
Posted via Mobile Device

kf4jfk · 03-17-2012, 09:49 PM

Do you still have any front fenders and hood for '64 GMC? I'm in Mid TN... Can I get directions to this place? Finally, something on this side of the country! hehe

**MisterC** · 03-18-2012, 01:03 AM

Quote:

Originally Posted by GMCNUT

We are removing all the chrome trim this weekend and packing it up - not sure which member said they were buying it - it was either you or one other guy I have to go back and look because everybody's online names run together when I have this many requests.....

I'm the one that said I was buying it and YES, I still want it. Just let me know the shipping and I'll get you the money.

63burban4x4 · 03-18-2012, 08:43 AM

I'm wondering if you'd want to sell the driver's side quarter panel from the 61 panel? is that a 1/2 ton short? mine's a suburban.

not sure if the shipping would be just crazy, but maybe if I only took from the bottom of the cove, down, it wouldn't be too bad

shipping to 01034 (MA)

thanks

**GMCNUT** · 03-20-2012, 11:48 PM

Quote:

Originally Posted by Biffsk8er

GMCNUT, Do you still have that '64-'66 Suburban (Carry All) steel grill with the headlight assemblies? I'm interested in buying it. I drive a '65 Suburban. I also see you have a suburban with the triangular tail lights; I am in need of those tail lens covers as well. If you still have them to sell, can you contact me with a price? If you no longer have them, would you let me down easy??

We do have a real nice 100% complete one for 100.00 and several others missing parts for less - we can fit any budget on grilles. Not sure I have any spare burb taillights - we do not want to sell the ones out of the 61 panel

**GMCNUT** · 03-20-2012, 11:50 PM

Quote:

Originally Posted by dodgiesdad

Would you happen to have a incomplete set of windshield trim? I am in need of one of the small pieces which covers the joints of the 4 large pieces. Also if Villa 66 does not take the spot light could I get some better pictures of it? I am curious if the overall condition of the light.

You can buy the windshield clips new through some of the aftermarket suppliers. We have removed the spotlight for an off-site buyer and are awaiting his response to see if he is buying it

eacostad · 03-20-2012, 11:51 PM

Do you have any front anti-sway bars for a 64 C10 truck?

How much for a complete set of body moldings for a 64 C10 shortbed fleetside?

**GMCNUT** · 03-20-2012, 11:52 PM

Quote:

Originally Posted by 1965Project

I'm still interested in the door panels if you still have them. How much shipping to 35207?

We do and I have not forgot you - just trying to juggle this sites needs and my job

will fetch them and get them weighed and measured for shipping tomorrow

**GMCNUT** · 03-20-2012, 11:58 PM

Quote:

Originally Posted by bigdogboxers

Shot in the dark.. But I am looking for a automatic crossmember for 1960 61 62 short bed and I need a short bed automatic driveline any luck?
Posted via Mobile Device

Oh you poor soul - the stuff you are describing does not exist and took me over 10 yrs to locate for my own truck. Best thing is to finally buy a long bed crossmember and cut it down and re-weld it to fit the short bed. Auto driveline stuff the same way - use long bed stuff and modify it. Good luck kemosabe

**GMCNUT** · 03-21-2012, 12:01 AM

Quote:

Originally Posted by MisterC

I'm the one that said I was buying it and YES, I still want it. Just let me know the shipping and I'll get you the money.

It is yours - we still do not have it in a tube yet, but since its pulled and neatly set aside and ready I will go to the carpet store and get the tube to ship it in tomorrow.....send a PM with your zip and address etc and I will send you the quote

**GMCNUT** · 03-21-2012, 12:02 AM

Quote:

Originally Posted by eacostad

Do you have any front anti-sway bars for a 64 C10 truck?

How much for a complete set of body moldings for a 64 C10 shortbed fleetside?

No front ones but may have one for the rear - do you want front or back?

I have sold the only set of aluminum trim we had to Mister C - sorry!

**GMCNUT** · 03-21-2012, 12:05 AM

Quote:

Originally Posted by 63burban4x4

I'm wondering if you'd want to sell the driver's side quarter panel from the 61 panel? is that a 1/2 ton short? mine's a suburban.

not sure if the shipping would be just crazy, but maybe if I only took from the bottom of the cove, down, it wouldn't be too bad

shipping to 01034 (MA)

thanks

I am sorry but we only want to sell the short panel as a complete truck - too many folks looking for them to cut this one up - you can use a longbed fleet for the parts you need - there is a guy selling the new panels on Ebay for your burb too....

eacostad · 03-21-2012, 12:08 AM

Quote:

Originally Posted by GMCNUT

No front ones but may have one for the rear - do you want front or back?

I have sold the only set of aluminum trim we had to Mister C - sorry!

I was needing the front sway bar, thanks anyways

**chevy_man5** · 03-21-2012, 09:31 AM

Do you have (2) sets of fleetside taillights, and (1) set of reverse lights, and how much would they be shipped to 83642?

Thanks!

62 short step · 03-21-2012, 11:27 AM

Any word on the shroud pieces?

**GMCNUT** · 03-21-2012, 11:47 PM

Quote:

Originally Posted by 62 short step

Any word on the shroud pieces?

Apologies - I got them pulled and brought here but never packed for shipping - will go do that right now. What is your zip for shipping quote?

03-15-2012, 08:23 PM	#101
villa 66 Registered User Join Date: May 2009 Location: MERCEDES,TEXAS Posts: 146	Re: GIANT 60-66 parts Stash Barn Find!! How much for spotlight on pic 9 shipped to 78570? Thanks.

03-15-2012, 11:36 PM	#102
QBA Proud Americano Join Date: May 2008 Location: CORONA,CA Posts: 98	Re: GIANT 60-66 parts Stash Barn Find!! how much for the 64-66 windshield trim? thanks __________________ Tattooed Cuban Trailer Trash. putting the cart before the horse since 1964.

03-16-2012, 01:03 PM	#103
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,201	Re: GIANT 60-66 parts Stash Barn Find!! Did you get the pics for the brake booster I emailed an also what did you find out on the body trim I spoke with you about Posted via Mobile Device

03-17-2012, 01:58 AM	#107
Biffsk8er Registered User Join Date: Mar 2012 Location: Austin, Texas Posts: 11	Re: GIANT 60-66 parts Stash Barn Find!! GMCNUT, Do you still have that '64-'66 Suburban (Carry All) steel grill with the headlight assemblies? I'm interested in buying it. I drive a '65 Suburban. I also see you have a suburban with the triangular tail lights; I am in need of those tail lens covers as well. If you still have them to sell, can you contact me with a price? If you no longer have them, would you let me down easy??

03-17-2012, 08:09 AM	#108
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: GIANT 60-66 parts Stash Barn Find!! Would you happen to have a incomplete set of windshield trim? I am in need of one of the small pieces which covers the joints of the 4 large pieces. Also if Villa 66 does not take the spot light could I get some better pictures of it? I am curious if the overall condition of the light.

03-17-2012, 11:01 AM	#109
1965Project Registered User Join Date: Oct 2011 Location: Birmingham Alabama Posts: 38	Re: GIANT 60-66 parts Stash Barn Find!! I'm still interested in the door panels if you still have them. How much shipping to 35207?

03-17-2012, 01:31 PM	#110
bigdogboxers Registered User Join Date: Aug 2009 Location: Rathdrum Idaho Posts: 197	Re: GIANT 60-66 parts Stash Barn Find!! Shot in the dark.. But I am looking for a automatic crossmember for 1960 61 62 short bed and I need a short bed automatic driveline any luck? Posted via Mobile Device

03-17-2012, 09:49 PM	#111
kf4jfk Registered User Join Date: Jul 2011 Location: Parker, CO Posts: 48	Re: GIANT 60-66 parts Stash Barn Find!! Do you still have any front fenders and hood for '64 GMC? I'm in Mid TN... Can I get directions to this place? Finally, something on this side of the country! hehe

03-18-2012, 08:43 AM	#113
63burban4x4 Registered User Join Date: Mar 2012 Location: US Posts: 446	Re: GIANT 60-66 parts Stash Barn Find!! I'm wondering if you'd want to sell the driver's side quarter panel from the 61 panel? is that a 1/2 ton short? mine's a suburban. not sure if the shipping would be just crazy, but maybe if I only took from the bottom of the cove, down, it wouldn't be too bad shipping to 01034 (MA) thanks

03-20-2012, 11:51 PM	#116
eacostad Registered User Join Date: Jan 2012 Location: Odessa,TX Posts: 22	Re: GIANT 60-66 parts Stash Barn Find!! Do you have any front anti-sway bars for a 64 C10 truck? How much for a complete set of body moldings for a 64 C10 shortbed fleetside? __________________ 1964 C10 SWB LY6/4L80e

03-21-2012, 09:31 AM	#123
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: GIANT 60-66 parts Stash Barn Find!! Do you have (2) sets of fleetside taillights, and (1) set of reverse lights, and how much would they be shipped to 83642? Thanks! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

03-21-2012, 11:27 AM	#124
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: GIANT 60-66 parts Stash Barn Find!! Any word on the shroud pieces? __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.