KS Parting a Blue 72 with Deluxe interior - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 02-06-2014, 03:53 PM

Quote:

Originally Posted by 1970-Old_Betsy

Not sure how far your breaking these down, but any chance you have a 3 series posi carrier?
Thanks,

Sorry I do not have one at the moment!

Quote:

Originally Posted by ironfish96

Know worries on the hood. I think I found one local.

Got it! Understood

Quote:

Originally Posted by flyingcubby

do you still have Cigarette lighter -don't know if it works or not $10, if so how much to89031

I have several but dont know if they work... 15 shipped!

Mike

flyingcubby · 02-06-2014, 05:31 PM

I'll take one, just as long as it has the knob attached...Pleas pm your pp account name and I'll pp as a gift....Thanks Mike

sprworm12 · 02-06-2014, 06:49 PM

Is this the medium blue paint on the exterior?

scorpion1110 · 02-06-2014, 07:23 PM

Hi- Might you have what is needed to changeover a 1972 GMC 2WD Longbed to Power steering? need:

PS Steering box
Pump
Pittman arm
Pullys
Brackets
Hoses.

Its a 350 small block.

Thanks!

**Cash3481** · 02-06-2014, 10:12 PM

Quote:

Originally Posted by flyingcubby

I'll take one, just as long as it has the knob attached...Pleas pm your pp account name and I'll pp as a gift....Thanks Mike

Pm sent with address

Quote:

Originally Posted by sprworm12

Is this the medium blue paint on the exterior?

I believe it is... Did you need something that is painted or the GBD maybe?

Quote:

Originally Posted by scorpion1110

Hi- Might you have what is needed to changeover a 1972 GMC 2WD Longbed to Power steering?
need:
PS Steering box
Pump
Pittman arm
Pullys
Brackets
Hoses.
Its a 350 small block.
Thanks!

I believe I have everything you need. The PS pump I have is almost new (maybe 2k miles). I'll go out and get a pic of what I have that will make you a complete setup.

Mike

snipescastle2 · 02-06-2014, 10:19 PM

Mike,
no rush on the cab sheet metal, I may have found one here locally. If anything else, I'll have you cut one out for me later on.
Thanks!
Ben Smith
816-956-1202

ARC190 · 02-06-2014, 11:01 PM

WAY too many posts to search through. Is the passenger vent window still available / in good condition? They look like they're chrome?

**Cash3481** · 02-07-2014, 12:26 AM

Quote:

Originally Posted by snipescastle2

Mike,
no rush on the cab sheet metal, I may have found one here locally. If anything else, I'll have you cut one out for me later on.
Thanks!
Ben Smith
816-956-1202

Ben,
If you need that cab back cut just tell me the cutline and Ill get it cut. I'm sure I could get it to Randy's for you if he didn't mind holding it for a small beverage fee till you get it from him. LMK

Quote:

Originally Posted by ARC190

WAY too many posts to search through. Is the passenger vent window still available / in good condition? They look like they're chrome?

Both doors are available. so yes the vents are available too. $75 shipped.
I can get you better pics tomorrow after work... its dark when I go in.

Mike

ARC190 · 02-07-2014, 07:55 AM

Pictures would be great. Lolling for no tint chrome frame.

ARC190 · 02-07-2014, 07:58 AM

Sorry, just the passenger side also...and stock glass. Sorry to be so picky. It's all original glass now. I'd love to keep it that way.

4spd · 02-07-2014, 11:02 AM

I will do 300 for the gate, pm sent.

snipescastle2 · 02-07-2014, 11:03 AM

Mike,
Here is a picture of what I need: basically door striker to door striker, from the bottom of the rear window to the floor.
Thanks!
Ben

**Cash3481** · 02-07-2014, 05:32 PM

Quote:

Originally Posted by ARC190

Pictures would be great. Lolling for no tint chrome frame.

Ill post pics tonight getting of in a few and will get them taken but cant post them until later tonight.

Quote:

Originally Posted by ARC190

Sorry, just the passenger side also...and stock glass. Sorry to be so picky. It's all original glass now. I'd love to keep it that way.

I got ya. let me sdee what I have at the storage unit.

Quote:

Originally Posted by 4spd

I will do 300 for the gate, pm sent.

Returned... Im avaliable Sunday but not fron 11:00 -2:00

Quote:

Originally Posted by snipescastle2

Mike,
Here is a picture of what I need: basically door striker to door striker, from the bottom of the rear window to the floor.
Thanks!
Ben

Ben,
If you wanted that cut I can get it for you this weekend if needed that early. If not, just let me know when youll be getting it or Ill see when I can get it "pony expressed" to Randy. Ill have to contact him first but pretty sure he would let me stage it there for you to pick up.

Mike

NoNeck · 02-07-2014, 06:57 PM

Mike, I sent you a MO for the Booster Bracket yesterday. You should have it today or tomorrow.

Thanks,
Wayne

**Cash3481** · 02-07-2014, 11:26 PM

Quote:

Originally Posted by ARC190

Sorry, just the passenger side also...and stock glass. Sorry to be so picky. It's all original glass now. I'd love to keep it that way.

Pics below! These vents are all tinted except the one that is NOT chrome. The ones in these doors are still in the doors but they are tinted as well.
Sorry I cant help you with the non-tinted one you need.

Quote:

Originally Posted by NoNeck

Mike, I sent you a MO for the Booster Bracket yesterday. You should have it today or tomorrow.
Thanks,
Wayne

Wayne,
Didn't receive it today but we've had snow so everything's a day or so behind.

Snipecastle2,
Ben, I loaded a few of the cab sitting on the ground it needs cab corners already as you know but thought you may want to see the back, Let me know if you want to get it cut and ill get it cutoff. This cab will be up for cuts if anyone needs a cut.

Mike

mag c10 · 02-08-2014, 01:51 AM

Any V8 motor stands? price to ship to 35114...

snipescastle2 · 02-08-2014, 11:17 AM

Mike,
Not really in that big of a hurry, but that looks nice, I already have the cab corner patch pieces. where do I send the money order, or do I pay Randy when I pick it up? I'll have the cash later this week, if thats alright, how soon do you figure you could get that to Randy?
Let me know if that's okay.
Ben

**Cash3481** · 02-08-2014, 12:08 PM

Quote:

Originally Posted by mag c10

Any V8 motor stands? price to ship to 35114...

$25 plus shipping. Let me know and Ill PM you the paypal address.

Quote:

Originally Posted by snipescastle2

Mike,
Not really in that big of a hurry, but that looks nice, I already have the cab corner patch pieces. where do I send the money order, or do I pay Randy when I pick it up? I'll have the cash later this week, if thats alright, how soon do you figure you could get that to Randy?
Let me know if that's okay.
Ben

Ben,
Ill check with a friend and see if he will do me a solid favor first and then Ill let you know. I can have it off next weekend if it all works out but Ill have to plan a trip to Randys if he isn't going by there anytime soon. I will send you my address for the MO after we work out the trip.
Mike

mag c10 · 02-08-2014, 12:41 PM

I'll take the motor stands for $25 plus shipping.

flyingcubby · 02-08-2014, 01:06 PM

Quote:

Originally Posted by flyingcubby

I'll take one, just as long as it has the knob attached...Pleas pm your pp account name and I'll pp as a gift....Thanks Mike

payment sent on 2/6/14...Thanks

**Cash3481** · 02-08-2014, 08:01 PM

Quote:

Originally Posted by mag c10

I'll take the motor stands for $25 plus shipping.

Pm headed your way!

Quote:

Originally Posted by flyingcubby

payment sent on 2/6/14...Thanks

I apologize, I had your box in the not paid side... I didn't realize you already paid, it will go out tonight. I have too many boxes of stuff waiting on payments!

Mike

flyingcubby · 02-08-2014, 11:57 PM

Quote:

Originally Posted by Cash3481

Pm headed your way!

I apologize, I had your box in the not paid side... I didn't realize you already paid, it will go out tonight. I have too many boxes of stuff waiting on payments!

Mike

Thanks for the update

**Cash3481** · 02-09-2014, 12:09 AM

Quote:

Originally Posted by flyingcubby

Thanks for the update

Shipped tonight! Pm sent.
Mike

RCbowtie69 · 02-09-2014, 08:06 PM

Quote:

Originally Posted by Cash3481

Panels are on the way...

I'll have them boxed and ready to send when it gets here.
Pm sent!

Mike

Hey Mike,just checking to see if MO has show up.Please let me know.Thanks Randy

**Cash3481** · 02-09-2014, 09:19 PM

Quote:

Originally Posted by NoNeck

Mike, I sent you a MO for the Booster Bracket yesterday. You should have it today or tomorrow.

Thanks,
Wayne

Quote:

Originally Posted by RCbowtie69

Hey Mike,just checking to see if MO has show up.Please let me know.Thanks Randy

Not sure what time the mailman came Sat but I had mail TODAY!
Both your mo's came today. I'll mail the packages in the am.
Mike

02-06-2014, 05:31 PM	#102
flyingcubby Registered User Join Date: Jul 2013 Location: Converse, Texas Posts: 102	Re: Parting a Blue 72 with Deluxe interior I'll take one, just as long as it has the knob attached...Pleas pm your pp account name and I'll pp as a gift....Thanks Mike

02-06-2014, 06:49 PM	#103
sprworm12 Registered User Join Date: Oct 2010 Location: gadsden ,al Posts: 36	Re: Parting a Blue 72 with Deluxe interior Is this the medium blue paint on the exterior?

02-06-2014, 07:23 PM	#104
scorpion1110 Registered User Join Date: Dec 2011 Location: mount airy MD Posts: 77	Re: Parting a Blue 72 with Deluxe interior Hi- Might you have what is needed to changeover a 1972 GMC 2WD Longbed to Power steering? need: PS Steering box Pump Pittman arm Pullys Brackets Hoses. Its a 350 small block. Thanks!

02-06-2014, 10:19 PM	#106
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Parting a Blue 72 with Deluxe interior Mike, no rush on the cab sheet metal, I may have found one here locally. If anything else, I'll have you cut one out for me later on. Thanks! Ben Smith 816-956-1202

02-06-2014, 11:01 PM	#107
ARC190 Registered User Join Date: Dec 2012 Location: Oklahoma Posts: 58	Re: Parting a Blue 72 with Deluxe interior WAY too many posts to search through. Is the passenger vent window still available / in good condition? They look like they're chrome?

02-07-2014, 07:55 AM	#109
ARC190 Registered User Join Date: Dec 2012 Location: Oklahoma Posts: 58	Re: Parting a Blue 72 with Deluxe interior Pictures would be great. Lolling for no tint chrome frame.

02-07-2014, 07:58 AM	#110
ARC190 Registered User Join Date: Dec 2012 Location: Oklahoma Posts: 58	Re: Parting a Blue 72 with Deluxe interior Sorry, just the passenger side also...and stock glass. Sorry to be so picky. It's all original glass now. I'd love to keep it that way.

02-07-2014, 11:02 AM	#111
4spd Registered User Join Date: Jun 2012 Location: Frankfort, Kansas Posts: 33	Re: Parting a Blue 72 with Deluxe interior I will do 300 for the gate, pm sent. __________________ 87 Chevy K20 - 350 Turbo 400 SOLD 72 Chevy K20 - 350 4spd, 2.5 skyjacker lift, 33 inch BFG's, Extreme bend hooks and Slots - SOLD 2016 85 Chevy K30 - 350 4spd

02-07-2014, 11:03 AM	#112
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Parting a Blue 72 with Deluxe interior Mike, Here is a picture of what I need: basically door striker to door striker, from the bottom of the rear window to the floor. Thanks! Ben Attached Images

02-07-2014, 06:57 PM	#114
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Parting a Blue 72 with Deluxe interior Mike, I sent you a MO for the Booster Bracket yesterday. You should have it today or tomorrow. Thanks, Wayne __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

02-08-2014, 01:51 AM	#116
mag c10 Registered User Join Date: Aug 2013 Location: Alabaster, Alabama Posts: 18	Re: Parting a Blue 72 with Deluxe interior Any V8 motor stands? price to ship to 35114... __________________ Mark _____________________________________________ 1968 c10 stepside 1948 GMC 1969 Chevelle

02-08-2014, 11:17 AM	#117
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Parting a Blue 72 with Deluxe interior Mike, Not really in that big of a hurry, but that looks nice, I already have the cab corner patch pieces. where do I send the money order, or do I pay Randy when I pick it up? I'll have the cash later this week, if thats alright, how soon do you figure you could get that to Randy? Let me know if that's okay. Ben

02-08-2014, 12:41 PM	#119
mag c10 Registered User Join Date: Aug 2013 Location: Alabaster, Alabama Posts: 18	Re: Parting a Blue 72 with Deluxe interior I'll take the motor stands for $25 plus shipping. __________________ Mark _____________________________________________ 1968 c10 stepside 1948 GMC 1969 Chevelle



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.