4x4 1971 K20 build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rednwhitec20 · 09-19-2016, 06:46 PM

This crew was widened the best feeling to fit on an LBZ chassis. Still a dually, has the 07 dash, and was built to haul his camper. Had a lot of bodywork done. He said the hood was 14 pieces to get it to fit. There were 2078 cars that went for the 30th! Hope the Dmax is done for the 31st!

Rednwhitec20 · 09-27-2016, 11:50 PM

Well I'm starting to memorize my card number from using it so much. We're in the midst of harvest so I'm just saving up now. Hopefully I can get the wiring and fuel wrapped up in the next month. I just ordered the VHX's with the OBD can for speedo and tach and many more.

**Dieselwrencher** · 09-28-2016, 01:51 AM

Very nice! You'll be happy with those!

Rednwhitec20 · 09-28-2016, 10:11 AM

Quote:

Originally Posted by Dieselwrencher

Very nice! You'll be happy with those!

I better be!

**Dieselwrencher** · 09-28-2016, 08:57 PM

Just send those back and get their new cluster if you think the VHX don't cost enough.

Rednwhitec20 · 09-28-2016, 10:23 PM

Quote:

Originally Posted by Dieselwrencher

Just send those back and get their new cluster if you think the VHX don't cost enough.

The VHX's are the only ones that will work with the OBD-II can. But I saw that. You have Dakota's in yours right?

**Dieselwrencher** · 10-01-2016, 09:27 AM

Quote:

Originally Posted by Rednwhitec20

You have Dakota's in yours right?

Yes I do. I could have purchased a running 70-72 K20 for what I have in my vhx set up.

Rednwhitec20 · 10-01-2016, 11:55 AM

Quote:

Originally Posted by Dieselwrencher

Yes I do. I could have purchased a running 70-72 K20 for what I have in my vhx set up.

I could probably have a brand new duramax after I'm done with my build...

but so could a lot of people. I have a pretty good chunk of change in my VHX setup also

ripper70 · 10-01-2016, 12:17 PM

I'm scared my wife will find my receipts. If she ever does you'll know it will be my last post..lol!

**Dieselwrencher** · 10-03-2016, 06:40 PM

Quote:

Originally Posted by Rednwhitec20

I could probably have a brand new duramax after I'm done with my build...

but so could a lot of people. I have a pretty good chunk of change in my VHX setup also

Have you priced a new Duramax lately? I doubt you've spent $60k yet.

notchbackgta · 09-29-2016, 01:44 PM

I want that HDX now that I have almost a year on my VHX setup. It is great, but I wish there was more that could be displayed on the dash at once, the HDX should cover that

**Dieselwrencher** · 09-29-2016, 08:51 PM

Quote:

Originally Posted by notchbackgta

I want that HDX now that I have almost a year on my VHX setup. It is great, but I wish there was more that could be displayed on the dash at once, the HDX should cover that

Add a second display/clock. It isn't much, but should help. I got one for mine from a 40 Ford. I haven't decided where I'll put it at this time though.

Rednwhitec20 · 09-29-2016, 09:46 PM

Quote:

Originally Posted by notchbackgta

I want that HDX now that I have almost a year on my VHX setup. It is great, but I wish there was more that could be displayed on the dash at once, the HDX should cover that

It's just money??

notchbackgta · 09-29-2016, 10:12 PM

Quote:

Originally Posted by Rednwhitec20

It's just money??

I tell myself that all the time

Rednwhitec20 · 09-29-2016, 11:55 PM

Quote:

Originally Posted by notchbackgta

I tell myself that all the time

Quote of my build...

NewType72 · 10-02-2016, 12:21 PM

We all just hope our wives sell our parts for what they're worth and not what we told them we bought them for

flashed · 10-02-2016, 04:36 PM

I teaching my wife what my parts are actually worth ,she goes to the swap meets with me . I price my parts to move and she knows how much to discount them and I go out buying more .

projectking · 10-03-2016, 06:49 PM

67k OTD for a SWR CC 1 ton Denali HD.......I'm keeping the Ford for a little bit!

Truck looks good!

Rednwhitec20 · 10-06-2016, 09:05 PM

There was a little sarcasm in that, but I am halfway there!

Swapped a couple of tires and wheels with my friend so he could fit his truck on the garage for paint. When I get more time I will put them both on the same side to see how they look. Sorry about the crappy picture.

Rednwhitec20 · 10-27-2016, 07:39 PM

As I'm waiting to get help on my wiring I'm just collecting parts. I'm hoping to get it started by thanksgiving but we will see how soon i will get help on it.

**Dieselwrencher** · 10-27-2016, 08:29 PM

What kind of help are you needing? I know a fellow board member that does a lot of dmax swaps and he probably can get you in contact with someone, or may know what you need to do.

Rednwhitec20 · 10-27-2016, 08:39 PM

Quote:

Originally Posted by Dieselwrencher

What kind of help are you needing? I know a fellow board member that does a lot of dmax swaps and he probably can get you in contact with someone, or may know what you need to do.

I may need it later on but he is helping me do all of the wiring/electrical work. Thanks for the help. I would attempt to do the wiring but it would be my first one and I'm a newb. I also want it to look really nice, and I don't think mine would

**Dieselwrencher** · 10-27-2016, 08:48 PM

Nothing wrong with reaching out for help. Especially for wiring as those problems can drive you nuts!

coopdog · 10-28-2016, 08:22 AM

what color are you painting this beast, , are you going with red and white or orange/ w, I see you referenced the orange and white blazer, those 2 colors do look pretty sharp

Rednwhitec20 · 10-28-2016, 09:56 AM

Quote:

Originally Posted by coopdog

what color are you painting this beast, , are you going with red and white or orange/ w, I see you referenced the orange and white blazer, those 2 colors do look pretty sharp

I'm going with white and viper red. It's about as red as it can get. It will be a while before I am able to paint it. Here is the paint scheme in another dmax truck, but mine will be more red than orange.

09-19-2016, 06:46 PM	#1
Rednwhitec20 Registered User Join Date: Jun 2014 Location: Princeton Kansas Posts: 235	Re: 4x4 1971 K20 build This crew was widened the best feeling to fit on an LBZ chassis. Still a dually, has the 07 dash, and was built to haul his camper. Had a lot of bodywork done. He said the hood was 14 pieces to get it to fit. There were 2078 cars that went for the 30th! Hope the Dmax is done for the 31st! Attached Images __________________ 1971 C20 Daily, Built 350/700R4 1971 K20 Project, LLY Duramax, 5 speed Allison, and 8 in lift on 37x13.50s K20 Build

09-27-2016, 11:50 PM	#2
Rednwhitec20 Registered User Join Date: Jun 2014 Location: Princeton Kansas Posts: 235	Re: 4x4 1971 K20 build Well I'm starting to memorize my card number from using it so much. We're in the midst of harvest so I'm just saving up now. Hopefully I can get the wiring and fuel wrapped up in the next month. I just ordered the VHX's with the OBD can for speedo and tach and many more. Attached Images __________________ 1971 C20 Daily, Built 350/700R4 1971 K20 Project, LLY Duramax, 5 speed Allison, and 8 in lift on 37x13.50s K20 Build

09-28-2016, 01:51 AM	#3
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 4x4 1971 K20 build Very nice! You'll be happy with those! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-28-2016, 08:57 PM	#5
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 4x4 1971 K20 build Just send those back and get their new cluster if you think the VHX don't cost enough. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-01-2016, 12:17 PM	#9
ripper70 Registered User Join Date: Oct 2009 Location: Lincoln City Oregon Posts: 173	Re: 4x4 1971 K20 build I'm scared my wife will find my receipts. If she ever does you'll know it will be my last post..lol! __________________ 1970 K20 1967 Blown Stepside 2016 Chevy 2500 Duramax 1989 Jeep Cherokee 1995 S-10 2014 Infinity Q-50 AWD 1970 Chevy K20 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=634164 1967 stepside rebuild http://67-72chevytrucks.com/vboard/s...d.php?t=684913 Shop build http://www.garagejournal.com/forum/s...d.php?t=225559

09-29-2016, 01:44 PM	#11
notchbackgta Registered User Join Date: Dec 2011 Location: Earth, NJ Posts: 479	Re: 4x4 1971 K20 build I want that HDX now that I have almost a year on my VHX setup. It is great, but I wish there was more that could be displayed on the dash at once, the HDX should cover that

10-02-2016, 12:21 PM	#16
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: 4x4 1971 K20 build We all just hope our wives sell our parts for what they're worth and not what we told them we bought them for __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

10-02-2016, 04:36 PM	#17
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: 4x4 1971 K20 build I teaching my wife what my parts are actually worth ,she goes to the swap meets with me . I price my parts to move and she knows how much to discount them and I go out buying more .

10-03-2016, 06:49 PM	#18
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: 4x4 1971 K20 build 67k OTD for a SWR CC 1 ton Denali HD.......I'm keeping the Ford for a little bit! Truck looks good! __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

10-06-2016, 09:05 PM	#19
Rednwhitec20 Registered User Join Date: Jun 2014 Location: Princeton Kansas Posts: 235	Re: 4x4 1971 K20 build There was a little sarcasm in that, but I am halfway there! Swapped a couple of tires and wheels with my friend so he could fit his truck on the garage for paint. When I get more time I will put them both on the same side to see how they look. Sorry about the crappy picture. Attached Images __________________ 1971 C20 Daily, Built 350/700R4 1971 K20 Project, LLY Duramax, 5 speed Allison, and 8 in lift on 37x13.50s K20 Build

10-27-2016, 07:39 PM	#20
Rednwhitec20 Registered User Join Date: Jun 2014 Location: Princeton Kansas Posts: 235	Re: 4x4 1971 K20 build As I'm waiting to get help on my wiring I'm just collecting parts. I'm hoping to get it started by thanksgiving but we will see how soon i will get help on it. Attached Images __________________ 1971 C20 Daily, Built 350/700R4 1971 K20 Project, LLY Duramax, 5 speed Allison, and 8 in lift on 37x13.50s K20 Build

10-27-2016, 08:29 PM	#21
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 4x4 1971 K20 build What kind of help are you needing? I know a fellow board member that does a lot of dmax swaps and he probably can get you in contact with someone, or may know what you need to do. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-27-2016, 08:48 PM	#23
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 4x4 1971 K20 build Nothing wrong with reaching out for help. Especially for wiring as those problems can drive you nuts! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-28-2016, 08:22 AM	#24
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: 4x4 1971 K20 build what color are you painting this beast, , are you going with red and white or orange/ w, I see you referenced the orange and white blazer, those 2 colors do look pretty sharp __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.