Porterbuilt Blazer Project - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 10-28-2007, 10:09 AM

Customer in not going to finish the build, and the project is up for sale. I believe he is asking $9000or $10,000.

bouncytruck · 10-28-2007, 11:32 AM

Got any pics of the current state of the truck?

crzngmychvy · 10-28-2007, 01:24 PM

Get it Bouncy! - Get it! Get it! Get it!

Hollywood Knight · 01-01-2008, 01:25 PM

I think I will finish it. To much work has been done to stop now.

babyblueoval · 01-01-2008, 01:59 PM

Quote:

Originally Posted by Hollywood Knight

I think I will finish it. To much work has been done to stop now.

Hollywood,

I saw your truck up on the lift at Nathan's shop and I agree, a lot of work had been done and it was all nice work.

(I took lots of pics of the DM C4 install to help me with mine)

If that much work had been done to my truck, I don't think there would be any way I'd get rid of it. I think there were some other circumstances involved with your decision to sell but if it were mine................I'll stop now.

It'll be an awesome ride.
Keep us up to date.

PBFAB.COM · 01-01-2008, 02:13 PM

Quote:

Originally Posted by Hollywood Knight

I think I will finish it. To much work has been done to stop now.

I was a little disappointed that we weren't going to finish it. Maybe that'll change!?

red71cheyenne · 01-01-2008, 03:56 PM

Finish it, finish it, finish it.....

Pics!!!

Blaz-air · 01-01-2008, 04:23 PM

Hmmmmmmmm?

babyblueoval · 01-01-2008, 04:57 PM

Here's a few I took of the C4 install while it was still on the rack.

Hollywood, I'll be happy to send you these, and a few others if you want.
Jim

smbrouss70 · 01-01-2008, 05:02 PM

Post the rest, Jim! You know we are junkies for pictures!

I saw it at Nathan's shop also, and it just made me wish I had more money and time to dump into my Blazer project.

Hollywood Knight · 01-01-2008, 05:02 PM

That sounds good. That frame needs a lot of work I ALMOST FORGOT.

babyblueoval · 01-01-2008, 05:10 PM

Quote:

Originally Posted by Hollywood Knight

That sounds good. That frame needs a lot of work I ALMOST FORGOT.

Yeah, it's not ready to go for sure but not too bad. You definitely need to weld on the c-notch stuff for your tie rod clearance. That might be a tiny weak spot.

babyblueoval · 01-01-2008, 05:20 PM

Quote:

Originally Posted by smbrouss70

Post the rest, Jim! You know we are junkies for pictures!

I saw it at Nathan's shop also, and it just made me wish I had more money and time to dump into my Blazer project.

The rest are mostly just for my use showing clearances and how everything fits but here they are:

And here's a few teasers for when I get started on mine:

**gregfull** · 01-01-2008, 05:56 PM

Quote:

Originally Posted by Blaz-air

Hmmmmmmmm?

My thoughts exactly Carter. I had a 2wd back in 1989! .....And I still miss it every time I see one like this.

Hollywood Knight · 01-01-2008, 06:45 PM

The Blazer project will take some time before it will be completed I do have another project I am working on. Heres some picks, just starting this one with my son. O and it doesn't have a bit of rust . I hope this one gos faster then the ones in the past.

LUV2XCLR8 · 01-01-2008, 11:01 PM

Quote:

Originally Posted by porterbuilt

Customer in not going to finish the build, and the project is up for sale. I believe he is asking $9000or $10,000.

Tempting

Quote:

Originally Posted by Hollywood Knight

I think I will finish it. To much work has been done to stop now.

Bummer

Hollywood Knight · 01-05-2008, 07:19 PM

Quote:

Originally Posted by porterbuilt

Customer in not going to finish the build, and the project is up for sale. I believe he is asking $9000or $10,000.

Nate when is a good time to come by the shop ?

PBFAB.COM · 01-05-2008, 09:28 PM

Quote:

Originally Posted by Hollywood Knight

Nate when is a good time to come by the shop ?

Next week...call and we can make an appointment.

LUV2XCLR8 · 01-06-2008, 02:05 AM

So does that mean it is for sale

Hollywood Knight · 01-06-2008, 04:11 AM

Quote:

Originally Posted by LUV2XCLR8

So does that mean it is for sale

She's not for sale .

LUV2XCLR8 · 01-06-2008, 04:12 AM

Didn't think so, but the way that it was quoted was confusing

*1sik52* · 11-25-2008, 11:01 AM

Any updates on this build??????

kyle4381 · 11-27-2008, 08:43 PM

Rick sold this project. Another one of Porterbuilt's customers bought it. No updates in the near future.

LUV2XCLR8 · 11-30-2008, 06:48 AM

TY for the feedback Kyle

bama51 · 12-04-2008, 10:40 AM

Nate, any updates you can give us?

10-28-2007, 10:09 AM	#101
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt Blazer Project Customer in not going to finish the build, and the project is up for sale. I believe he is asking $9000or $10,000. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

10-28-2007, 11:32 AM	#102
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Porterbuilt Blazer Project Got any pics of the current state of the truck? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-28-2007, 01:24 PM	#103
crzngmychvy "1972 C5" Join Date: Jul 2004 Location: SoCal Posts: 729	Re: Porterbuilt Blazer Project Get it Bouncy! - Get it! Get it! Get it! __________________ - 72 2wd Blazer ...sold... 2wd Blazer Page

01-01-2008, 01:25 PM	#104
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Porterbuilt Blazer Project I think I will finish it. To much work has been done to stop now.

01-01-2008, 03:56 PM	#107
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Porterbuilt Blazer Project Finish it, finish it, finish it..... Pics!!! __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

01-01-2008, 04:23 PM	#108
Blaz-air Digital Dude Join Date: Jun 2000 Location: St. Louis Posts: 610	Re: Porterbuilt Blazer Project Hmmmmmmmm? __________________ Carter Hickman www.hokdigitalpaintbooth.com carterhickmandesigns.com

01-01-2008, 04:57 PM	#109
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: Porterbuilt Blazer Project Here's a few I took of the C4 install while it was still on the rack. Hollywood, I'll be happy to send you these, and a few others if you want. Jim __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

01-01-2008, 05:02 PM	#110
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: Porterbuilt Blazer Project Post the rest, Jim! You know we are junkies for pictures! I saw it at Nathan's shop also, and it just made me wish I had more money and time to dump into my Blazer project. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-01-2008, 05:02 PM	#111
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Porterbuilt Blazer Project That sounds good. That frame needs a lot of work I ALMOST FORGOT.

01-01-2008, 06:45 PM	#115
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Porterbuilt Blazer Project The Blazer project will take some time before it will be completed I do have another project I am working on. Heres some picks, just starting this one with my son. O and it doesn't have a bit of rust . I hope this one gos faster then the ones in the past. Attached Images

01-06-2008, 02:05 AM	#119
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Porterbuilt Blazer Project So does that mean it is for sale __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-06-2008, 04:12 AM	#121
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Porterbuilt Blazer Project Didn't think so, but the way that it was quoted was confusing __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-25-2008, 11:01 AM	#122
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Porterbuilt Blazer Project Any updates on this build??????

11-27-2008, 08:43 PM	#123
kyle4381 Senior Member Join Date: Nov 2005 Location: AZ Posts: 416	Re: Porterbuilt Blazer Project Rick sold this project. Another one of Porterbuilt's customers bought it. No updates in the near future. Last edited by kyle4381; 11-27-2008 at 08:45 PM.

11-30-2008, 06:48 AM	#124
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Porterbuilt Blazer Project TY for the feedback Kyle __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

12-04-2008, 10:40 AM	#125
bama51 Registered User Join Date: Jun 2007 Location: Madison, AL Posts: 140	Re: Porterbuilt Blazer Project Nate, any updates you can give us?

Register or Log In To remove these advertisements.