'67 Short Step #2 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kyull67 · 03-15-2008, 02:13 AM

Got a little more work done today. I finished the patch panel on the roof, after some filler and seam sealer it will be good as new. I also got the interior sanded down and ready for primer and then I pulled the last of the dents on the cab. Tomorrow I plan on making a trip to Manes truck parts to get my rockers, cab corner, and rear door pillar.

kyull67 · 03-16-2008, 05:46 AM

I found this hood today at the salvage yard only 5 miles from my house! I spent about an hour repairing the rust on the front lip and it only has one tiny dent that needs taken care of. This hood saved me alot of time over the original! Now to find some fenders. Also, I ordered my rockers, cab corner, and rear door pillar from Manes and they should be here Monday. I'll Install those hopefully Tuesday before I head out to Chicago. Here's a few pics of the new hood.

Richard8971 · 03-17-2008, 08:30 AM

Nice score on the hood. Looks like it is in decent shape. It's always nice to find OEM parts, even if they require some extra work.

Can't wait to see more progress!

Don

bobbo · 03-18-2008, 04:02 AM

Went over and helped pull the engine out today.

Going to check tomorrow with a guy I know for the machine work and some performance upgrades as well as pulling the engine apart some more tomorrow night.

Here's a few pics I took. I'm sure kyull67 will post some he took and update.

kyull67 · 03-19-2008, 04:24 AM

Thanks for the Help Bobbo for helping me pull the engine and find a good machine shop for it.

Hopefully It'll be in the machine shop very soon.

kyull67 · 03-19-2008, 04:26 AM

This also showed up today.

bobbo · 03-19-2008, 04:39 AM

No pics of what was inside!? That's the good part!

kyull67 · 03-19-2008, 04:55 AM

Nope. I'll wait till they're on.

Richard8971 · 03-19-2008, 07:56 AM

You know... if my truck still had the inline 6, I would have rebuilt it too. They have plenty of power and are much better on gas than alot of V8's.

I like the fact you are keeping it "stock". So many people yank the 6's out and stuff in 350's. Different is good.

My truck stock came with a 6 but I found a 283 to rebuild for it. It came out of a '68 3/4 ton.

I bet on the size of the box, it is a back glass of sorts.

D

kyull67 · 03-20-2008, 06:23 AM

Quote:

Originally Posted by Richard8971

You know... if my truck still had the inline 6, I would have rebuilt it too. They have plenty of power and are much better on gas than alot of V8's.

I like the fact you are keeping it "stock". So many people yank the 6's out and stuff in 350's. Different is good.

My truck stock came with a 6 but I found a 283 to rebuild for it. It came out of a '68 3/4 ton.

I bet on the size of the box, it is a back glass of sorts.

D

I'm selling off one of my bikes to fund the engine build

but it will be worth it. This truck will get driven way more than I ever rode that bike.
The box was full of rocker panels, a cab corner, and the rear door pillar piece for the passenger side.

kyull67 · 03-20-2008, 06:36 AM

Today I got around to installing my rocker panels. The fit was actually really good except for one relief cut I had to make on the passenger side. That side took me 1.5 hours including removing the cab corner, but the driver side fit so well it only took me 35 minutes! Tomorrow I should have a couple hours to finish the cab corner and possibly drop off my engine at the machine shop. If not then It will have to wait untill I return from Chicago.

kyull67 · 03-20-2008, 06:53 AM

Sometimes I picture what some of you might look like since some of us spend alot of time on here. So I thought I might as well post some pictures of me working on my trucks, plus I've got nothing better to do at the moment. The first pictures are with my first '67 and the last is SKULLface jr. and I mean muggin'.

my67chevytruck · 03-20-2008, 05:25 PM

Nice progress kyull

arkracing · 03-20-2008, 06:14 PM

What brand stud welder do you have? Do you like it - i.e. review?

I think I saw the box in one of the pictures, but it was hard to see what brand etc. etc.

- Nice progress

kyull67 · 03-20-2008, 07:26 PM

Quote:

Originally Posted by arkracing

What brand stud welder do you have? Do you like it - i.e. review?

I think I saw the box in one of the pictures, but it was hard to see what brand etc. etc.

- Nice progress

I have a cheap Chicago Electric stud welder. I bought it from Harbor Freight including the slide hammer and full two year warranty for $96. It works awesome and I've gone through over 200 studs with it and no problems.

Blue'72 · 03-20-2008, 08:07 PM

Nice work! The truck is coming along great! Made me sick to see the burned pics again...

kyull67 · 03-20-2008, 08:15 PM

Quote:

Originally Posted by Blue'72

Nice work! The truck is coming along great! Made me sick to see the burned pics again...

Thanks, and sorry.

Sh!t Happens, and my current build is well on it's way to being alot more badass than the last one!

lyrikz · 03-20-2008, 08:43 PM

Quote:

Originally Posted by kyull67

Thanks, and sorry.

Sh!t Happens, and my current build is well on it's way to being alot more badass than the last one!

It took you 35 minutes to install a rocker? Are you removing the old ones? Or just welding on a new one over the old one?

kyull67 · 03-20-2008, 10:28 PM

I cut the old ones out a couple of weeks ago(PAGE 3). But I hadn't ordered the new ones yet. So with removing and welding in place the new rocker it probably took about 1.5 hrs total.

samwise68 · 03-21-2008, 01:11 AM

lookin' good man, it seems like everything is falling into place pretty well.

oh, and definitely diggin' the Floyd shirt...

keep at it, she'll be on the road in no time!

-Sam.

kyull67 · 03-21-2008, 03:48 AM

Quote:

Originally Posted by samwise68

lookin' good man, it seems like everything is falling into place pretty well.

oh, and definitely diggin' the Floyd shirt...

keep at it, she'll be on the road in no time!

-Sam.

Thanks Sam. And here's the last body panel that needed replaced! On to body filler.

ChaseDale3and8 · 03-22-2008, 03:15 AM

It's sure coming together nicely! Won't be long before you have paint on it! Oh, and having Bobbo around is a really big help! Great guy! I'm glad that we have a guy like him around that will help us out when we really need it! He fixed a problem with my tail light wiring yesterday so that my old truck would pass inspection. Electrical gremlins just aren't my strong point, but he's a whiz at it! ...Joe

kyull67 · 03-22-2008, 08:16 PM

Quote:

Originally Posted by ChaseDale3and8

It's sure coming together nicely! Won't be long before you have paint on it! Oh, and having Bobbo around is a really big help! Great guy! I'm glad that we have a guy like him around that will help us out when we really need it! He fixed a problem with my tail light wiring yesterday so that my old truck would pass inspection. Electrical gremlins just aren't my strong point, but he's a whiz at it! ...Joe

Yes he's really helpful! I can't wait untill I actually get to help on his own truck. After all, I'm going to need something to do after I finish this one!

kyull67 · 03-23-2008, 01:32 AM

Big update everyone. It's finally painted!

**Boog** · 03-23-2008, 04:05 AM

ummmmm. What shade is that? Pepto what?

03-15-2008, 02:13 AM	#101
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 Got a little more work done today. I finished the patch panel on the roof, after some filler and seam sealer it will be good as new. I also got the interior sanded down and ready for primer and then I pulled the last of the dents on the cab. Tomorrow I plan on making a trip to Manes truck parts to get my rockers, cab corner, and rear door pillar. Attached Images __________________ The first '67 The current '67 '63 Biscayne Last edited by kyull67; 03-15-2008 at 07:59 PM. Reason: sp.

03-16-2008, 05:46 AM	#102
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 I found this hood today at the salvage yard only 5 miles from my house! I spent about an hour repairing the rust on the front lip and it only has one tiny dent that needs taken care of. This hood saved me alot of time over the original! Now to find some fenders. Also, I ordered my rockers, cab corner, and rear door pillar from Manes and they should be here Monday. I'll Install those hopefully Tuesday before I head out to Chicago. Here's a few pics of the new hood. Attached Images __________________ The first '67 The current '67 '63 Biscayne

03-17-2008, 08:30 AM	#103
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: '67 Short Step #2 Nice score on the hood. Looks like it is in decent shape. It's always nice to find OEM parts, even if they require some extra work. Can't wait to see more progress! Don __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 03-17-2008 at 08:32 AM.

03-18-2008, 04:02 AM	#104
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: '67 Short Step #2 Went over and helped pull the engine out today. Going to check tomorrow with a guy I know for the machine work and some performance upgrades as well as pulling the engine apart some more tomorrow night. Here's a few pics I took. I'm sure kyull67 will post some he took and update. Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

03-19-2008, 04:24 AM	#105
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 Thanks for the Help Bobbo for helping me pull the engine and find a good machine shop for it. Hopefully It'll be in the machine shop very soon. Attached Images __________________ The first '67 The current '67 '63 Biscayne

03-19-2008, 04:26 AM	#106
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 This also showed up today. Attached Images __________________ The first '67 The current '67 '63 Biscayne Last edited by kyull67; 03-19-2008 at 04:28 AM. Reason: because

03-19-2008, 04:39 AM	#107
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: '67 Short Step #2 No pics of what was inside!? That's the good part! __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

03-19-2008, 04:55 AM	#108
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 Nope. I'll wait till they're on. __________________ The first '67 The current '67 '63 Biscayne

03-19-2008, 07:56 AM	#109
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: '67 Short Step #2 You know... if my truck still had the inline 6, I would have rebuilt it too. They have plenty of power and are much better on gas than alot of V8's. I like the fact you are keeping it "stock". So many people yank the 6's out and stuff in 350's. Different is good. My truck stock came with a 6 but I found a 283 to rebuild for it. It came out of a '68 3/4 ton. I bet on the size of the box, it is a back glass of sorts. D __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 03-19-2008 at 07:57 AM.

03-20-2008, 06:36 AM	#111
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 Today I got around to installing my rocker panels. The fit was actually really good except for one relief cut I had to make on the passenger side. That side took me 1.5 hours including removing the cab corner, but the driver side fit so well it only took me 35 minutes! Tomorrow I should have a couple hours to finish the cab corner and possibly drop off my engine at the machine shop. If not then It will have to wait untill I return from Chicago. Attached Images __________________ The first '67 The current '67 '63 Biscayne

03-20-2008, 06:53 AM	#112
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 Sometimes I picture what some of you might look like since some of us spend alot of time on here. So I thought I might as well post some pictures of me working on my trucks, plus I've got nothing better to do at the moment. The first pictures are with my first '67 and the last is SKULLface jr. and I mean muggin'. Attached Images __________________ The first '67 The current '67 '63 Biscayne

03-20-2008, 05:25 PM	#113
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: '67 Short Step #2 Nice progress kyull __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-20-2008, 06:14 PM	#114
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	Re: '67 Short Step #2 What brand stud welder do you have? Do you like it - i.e. review? I think I saw the box in one of the pictures, but it was hard to see what brand etc. etc. - Nice progress __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

03-20-2008, 08:07 PM	#116
Blue'72 Skinned knuckles Join Date: Oct 2006 Location: Longview, Washington Posts: 1,126	Re: '67 Short Step #2 Nice work! The truck is coming along great! Made me sick to see the burned pics again... __________________ '72 C-10 longbox soon to be short step! '72 Chevelle (sold in January) '07 Sebring '01 Ranger (I've gotta long commute..) If you try to fail, and succeed, which have you done? My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=276904

03-20-2008, 10:28 PM	#119
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 I cut the old ones out a couple of weeks ago(PAGE 3). But I hadn't ordered the new ones yet. So with removing and welding in place the new rocker it probably took about 1.5 hrs total. __________________ The first '67 The current '67 '63 Biscayne Last edited by kyull67; 03-20-2008 at 10:30 PM.



Register or Log In To remove these advertisements.

03-22-2008, 03:15 AM	#122
ChaseDale3and8 Registered User Join Date: Jun 2007 Location: Springfield Mo. Posts: 1,086	Re: '67 Short Step #2 It's sure coming together nicely! Won't be long before you have paint on it! Oh, and having Bobbo around is a really big help! Great guy! I'm glad that we have a guy like him around that will help us out when we really need it! He fixed a problem with my tail light wiring yesterday so that my old truck would pass inspection. Electrical gremlins just aren't my strong point, but he's a whiz at it! ...Joe __________________ I'm not speedin'! I'm qualifyin'!

03-23-2008, 01:32 AM	#124
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: '67 Short Step #2 Big update everyone. It's finally painted! Attached Images __________________ The first '67 The current '67 '63 Biscayne

03-23-2008, 04:05 AM	#125
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: '67 Short Step #2 ummmmm. What shade is that? Pepto what? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

Register or Log In To remove these advertisements.