72 suburban "3drdwn" - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RunninLo · 01-30-2009, 03:00 PM

Quote:

Originally Posted by project 67 sub

lookin good runninlo

Thank You

Quote:

Originally Posted by MickMc

Just curious, why would they have failed?

Mick

Inclusions in the start/stop nit-picky but would've been a fail.

Quote:

Originally Posted by hotrodhomi

updates?

Quote:

Originally Posted by CTENTA1

The Burb is not sold, is it? We want updated pics to prove you still have it!

LOL...............

Burb will NEVER be sold as long as I'm alive as that was one of the conditions that allowed me to purchase it. Due to single digit temps and a new baby(excuses I know) the only real progress has been moving the shell back inside out of the snow. I'm waiting on a few parts to be finished for it that I farmed out and then the frame and body will be re-united. It'll probably be a few more weeks before I even look at it again but I Promise the documentation will continue as well as work on my Dually Square once the spindles come through for it.

Again thank you to everyone for your interest. It really does keep me thinking about this project and motivated to move forward.

Josh

BigSky71 · 01-30-2009, 04:48 PM

Quote:

Originally Posted by RunninLo

Again thank you to everyone for your interest. It really does keep me thinking about this project and motivated to move forward.

Josh

Well then get back in the garage! J/k, I know what its like to try and get garage/shop time when there is a new baby human in your care.

RunninLo · 04-09-2009, 10:54 PM

OK so I actually knocked the dust off the burb frame today and dealt with that rolled portion of the frame that is folded down about half an inch. It was a win/lose(win?) sort of day.

While dealing with that last bit of clearance allowed the frame to lay flat, firmly planted on terra firma (WIN

) it did reveal a wheel/tire diameter issue.
In the pictures the frame is still rolling the stock 235/75/15 which has an outside diameter of ~28.87":

anybody notice that all 4 tires are sitting on 2x4 box tubing and the frame STILL plants flat.

Now my 20's are fitted with 245/35/20 which have an outside diameter of ~26.75". That effectively would allow me to swap to 3" tubing under the tires and still lay the frame flat out.
This situation is effectively wasting 3" of my suspension travel.
now I could go back to my stock spindles up front and space my bags in the back. I could also put some balloon rubber on my 20's and get a plusher ride.

Honestly though I think I'm going to begin the process of begging my wife to let me upgrade to 22's. I do have the fact that she likes my 20s and they fit her 66 conti going for me. Only time will tell.

Well back to being a dad but the weather is finally warming so we should see some more progress on this thing soon.
Josh

Alan's Classic · 04-09-2009, 11:10 PM

Nice work Josh, I see your slowly coming out of hibernation.

RunninLo · 04-23-2009, 01:25 PM

Reunited and it feels so good.....

Managed to borrow the 2 post again and set the body back on the frame (although my gut tells me it will come off at least once more).

The front is 0 psi but there is also a 2x6 under the rails to avoid rocker damage as they hang slightly below the frame. The rear is aired up about half way due to the need for additional trimming of the inner wells which may happen later today. I hope to have the tires back up on the 2x4 tubing from last pic and see how hard it will lay with the body on.
Thanks to "Other" Josh ( his wife gave him that nickname when we worked together), Nate (Jones not PB) , and the road dog himself good ole KD for the help .

Josh

Alan's Classic · 04-23-2009, 03:05 PM

Man, it looks great Josh. the last time I saw it it had snow on it.

RunninLo · 04-23-2009, 05:42 PM

Weather today was iffy but no snow fortunately. I was able to trim the rear wells so that I could lay it flat but haven't made it to the tubing under the tires to bottom out the suspension yet. Back to work tomorrow so probably next week before anymore updates.
here is the latest:

pics were from my cell. I'll get it outside in the sun for some "glamour" shots next week hopefully
Josh

Dinos63 · 04-23-2009, 07:17 PM

Duuude nice work,

Hoffman65burb · 04-25-2009, 03:50 AM

looks awsome man, suscribed

joe231 · 05-01-2009, 12:20 AM

BAD-ASS!!!!
BAD-ASS!!!!
BAD-ASS!!!!

oh and did I mention............................................................................................. ....................................................................BAD-ASS??

nuke1 · 05-01-2009, 03:19 AM

Now that is LONG AND LOW, looks great

RunninLo · 06-24-2009, 11:55 PM

this thing spends more time on the dang trailer

Alan's Classic · 06-25-2009, 12:18 AM

Quote:

Originally Posted by RunninLo

this thing spends more time on the dang trailer

Nice progress Josh

*project 67 sub* · 06-25-2009, 02:10 AM

thats freakin sweet bro. cant wait till mine sits like that someday.

aggie91 · 07-24-2009, 09:49 PM

Any updates? Hope your little one and your wife are doing good.

little nick D · 07-25-2009, 02:20 AM

hey man the work looks good an love the way the burb looks as is!!

kev2809 · 07-29-2009, 09:33 PM

nice work, your burb is lookin real good!

RunninLo · 08-19-2009, 06:42 PM

Quote:

Originally Posted by aggie91

Any updates? Hope your little one and your wife are doing good.

I can't believe Izzy is 9mos already. Walking and showing real personality. Mrs is good. She's working on getting into real-estate. Although I question the timing, it looks like an ok time in our local market. She will keep her regular job so not risking too much.

As for the burb, well sadly due to a serious lack of time I have only managed to move it around and stick my 20's back on. I have a friend I'm building a mini-truck for bringing me some 22's to try out so we will see how those look. I did manage to get a couple of pics last week I though were sort of cool.

plate reads 3DR DWN , slammed dually peeking out of garage.

Quote:

Originally Posted by little nick D

hey man the work looks good an love the way the burb looks as is!!

.

Me too although I would like some headlights and taillights and black out the core. Next step is to get it into a black or dark grey sealer and then start the patch work on the body. I'm hoping to get it drivable while doing so so I can rejuvinate the fire.

Quote:

Originally Posted by kev2809

nice work, your burb is lookin real good!

Thank you. it is very rough bodywise in person but seeing what JonZ did with his chop and a little bird told me another skilled board member might find their way to my locale, I'm sure i can get some help fixing that. it IS after all ONLY METAL.

Josh

kev2809 · 08-19-2009, 08:22 PM

man your burb looks good! so what paint scheme you going with?

RunninLo · 10-02-2009, 11:52 PM

this thread is starting to feel more like the suburban version of where's Waldo.....

snapped this pic on the cell today and thought it was cool. wish there was new work done but ..... well... any way enjoy the pic.

Josh

Alan's Classic · 10-02-2009, 11:57 PM

I'm enjoying the pic

jonzcustomshop · 10-03-2009, 07:08 AM

I am thinking yes on the GMC grille, so it will match the crew

**lolife99** · 10-03-2009, 07:26 AM

What did you end up doing to the dually suspension? Is it bagged now?

We need to hijack this thread with some cool dually pics!

FRENCHBLUE72 · 10-03-2009, 10:10 AM

Mine has been sitting also while I have been other projects but this winter she is gonna get some work done to her.....Btw I took my headlights out of her so she couldn't see me workin on other trucks also.... hahhahahahaha

joe231 · 10-03-2009, 10:36 AM

cool shot
I wanna see more pics of the crew cab....got any?

04-09-2009, 10:54 PM	#103
RunninLo 3DrDwn--the 'burb not the band Join Date: Jan 2007 Location: missoula, mt Posts: 598	Re: 72 suburban "3drdwn" OK so I actually knocked the dust off the burb frame today and dealt with that rolled portion of the frame that is folded down about half an inch. It was a win/lose(win?) sort of day. While dealing with that last bit of clearance allowed the frame to lay flat, firmly planted on terra firma (WIN ) it did reveal a wheel/tire diameter issue. In the pictures the frame is still rolling the stock 235/75/15 which has an outside diameter of ~28.87": anybody notice that all 4 tires are sitting on 2x4 box tubing and the frame STILL plants flat. Now my 20's are fitted with 245/35/20 which have an outside diameter of ~26.75". That effectively would allow me to swap to 3" tubing under the tires and still lay the frame flat out. This situation is effectively wasting 3" of my suspension travel. now I could go back to my stock spindles up front and space my bags in the back. I could also put some balloon rubber on my 20's and get a plusher ride. Honestly though I think I'm going to begin the process of begging my wife to let me upgrade to 22's. I do have the fact that she likes my 20s and they fit her 66 conti going for me. Only time will tell. Well back to being a dad but the weather is finally warming so we should see some more progress on this thing soon. Josh __________________ Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327

04-09-2009, 11:10 PM	#104
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 72 suburban "3drdwn" Nice work Josh, I see your slowly coming out of hibernation. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-23-2009, 01:25 PM	#105
RunninLo 3DrDwn--the 'burb not the band Join Date: Jan 2007 Location: missoula, mt Posts: 598	Re: 72 suburban "3drdwn" Reunited and it feels so good..... Managed to borrow the 2 post again and set the body back on the frame (although my gut tells me it will come off at least once more). The front is 0 psi but there is also a 2x6 under the rails to avoid rocker damage as they hang slightly below the frame. The rear is aired up about half way due to the need for additional trimming of the inner wells which may happen later today. I hope to have the tires back up on the 2x4 tubing from last pic and see how hard it will lay with the body on. Thanks to "Other" Josh ( his wife gave him that nickname when we worked together), Nate (Jones not PB) , and the road dog himself good ole KD for the help . Josh __________________ Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327

04-23-2009, 03:05 PM	#106
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 72 suburban "3drdwn" Man, it looks great Josh. the last time I saw it it had snow on it. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-23-2009, 05:42 PM	#107
RunninLo 3DrDwn--the 'burb not the band Join Date: Jan 2007 Location: missoula, mt Posts: 598	Re: 72 suburban "3drdwn" Weather today was iffy but no snow fortunately. I was able to trim the rear wells so that I could lay it flat but haven't made it to the tubing under the tires to bottom out the suspension yet. Back to work tomorrow so probably next week before anymore updates. here is the latest: pics were from my cell. I'll get it outside in the sun for some "glamour" shots next week hopefully Josh __________________ Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327

04-23-2009, 07:17 PM	#108
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 72 suburban "3drdwn" Duuude nice work, __________________ CHEVY ONLY... Nothin Else !

04-25-2009, 03:50 AM	#109
Hoffman65burb Registered User Join Date: Jul 2008 Location: Vancouver BC Posts: 448	Re: 72 suburban "3drdwn" looks awsome man, suscribed __________________ 1978 GMC Jimmy 454bbc Turbo400 NP205 3.73 gears 4inch lift 33's Last edited by Hoffman65burb; 04-25-2009 at 03:51 AM.

05-01-2009, 12:20 AM	#110
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 72 suburban "3drdwn" BAD-ASS!!!! BAD-ASS!!!! BAD-ASS!!!! oh and did I mention............................................................................................. ....................................................................BAD-ASS?? __________________ *CHEVY ONLY*

05-01-2009, 03:19 AM	#111
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 72 suburban "3drdwn" Now that is LONG AND LOW, looks great __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

06-24-2009, 11:55 PM	#112
RunninLo 3DrDwn--the 'burb not the band Join Date: Jan 2007 Location: missoula, mt Posts: 598	Re: 72 suburban "3drdwn" this thing spends more time on the dang trailer __________________ Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327

06-25-2009, 02:10 AM	#114
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 72 suburban "3drdwn" thats freakin sweet bro. cant wait till mine sits like that someday.

07-24-2009, 09:49 PM	#115
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 72 suburban "3drdwn" Any updates? Hope your little one and your wife are doing good. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

07-25-2009, 02:20 AM	#116
little nick D Registered User Join Date: May 2009 Location: dfw texas Posts: 52	Re: 72 suburban "3drdwn" hey man the work looks good an love the way the burb looks as is!!

07-29-2009, 09:33 PM	#117
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: 72 suburban "3drdwn" nice work, your burb is lookin real good!

08-19-2009, 08:22 PM	#119
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: 72 suburban "3drdwn" man your burb looks good! so what paint scheme you going with? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

10-02-2009, 11:52 PM	#120
RunninLo 3DrDwn--the 'burb not the band Join Date: Jan 2007 Location: missoula, mt Posts: 598	Re: 72 suburban "3drdwn" this thread is starting to feel more like the suburban version of where's Waldo..... snapped this pic on the cell today and thought it was cool. wish there was new work done but ..... well... any way enjoy the pic. Josh __________________ Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327

10-02-2009, 11:57 PM	#121
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 72 suburban "3drdwn" I'm enjoying the pic __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

10-03-2009, 07:08 AM	#122
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 72 suburban "3drdwn" I am thinking yes on the GMC grille, so it will match the crew

10-03-2009, 07:26 AM	#123
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: 72 suburban "3drdwn" What did you end up doing to the dually suspension? Is it bagged now? We need to hijack this thread with some cool dually pics! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-03-2009, 10:10 AM	#124
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 72 suburban "3drdwn" Mine has been sitting also while I have been other projects but this winter she is gonna get some work done to her.....Btw I took my headlights out of her so she couldn't see me workin on other trucks also.... hahhahahahaha __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-03-2009, 10:36 AM	#125
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 72 suburban "3drdwn" cool shot I wanna see more pics of the crew cab....got any? __________________ *CHEVY ONLY*

Register or Log In To remove these advertisements.