Parting 72 ochre chevy - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rupdog · 12-07-2008, 07:46 PM

how much for the tailgate trim (3pcs) and the upper/lower paint line trim that runs below the rear window (3pcs)? assuming these are all originals, and straight?

thx!

Rupdog · 12-07-2008, 08:10 PM

also need the blockoff plate w/ 2 screws(clutch linkage hole, i think) for the lower firewall. please include shipping to 90740. thx again.

teeitup · 12-07-2008, 11:10 PM

Rupdog, the tailgate chrome is not the best shape, chrome is faded and quite a few dents, I probably shouldn't of even put it in the thread. The cab chrome has a couple small dents not bad, its $10 plus shipping. The clutch block off plate is $10 if you buy the cab chrome or $13 shipped by itself. Thanks Randy

myoldchevytruck · 12-07-2008, 11:17 PM

Randy, I am looking for the hardware, i.e. bolts, nuts, washers and spacers etc. to secure the radiator support to the frame in 67'-68'. Thanks

teeitup · 12-09-2008, 01:12 PM

Harry, sorry no 67-68's right now. I always just cut the bolt with a torch, so there usually isn't much left of them. Thanks Randy

**CPNE** · 12-09-2008, 01:26 PM

Randy, how about one of these rear brake hose bracket and brass "T" retaining bolt. Circled in pic.

Also Th350 2wd dipstick

teeitup · 12-09-2008, 01:29 PM

Jeff, I'll look and see if its on there I have a guy that may be wanting the rearend, so I have to give him first shot at it. Thanks Randy

**CPNE** · 12-09-2008, 01:41 PM

Quote:

Originally Posted by teeitup

Jeff, I'll look and see if its on there I have a guy that may be wanting the rearend, so I have to give him first shot at it. Thanks Randy

Thanks LMK

big dump · 12-09-2008, 08:52 PM

Thanks Randy, going to pass on the sheet metal right now cause I'm not that far along in the project. A/C controller looks great though just as described. Thanks again,
Patrick

Rupdog · 12-09-2008, 09:45 PM

i guess i'll pass on the trim then. i only needed the passenger side cab trim. is that one good?

also, i picked up a blockoff plate today at the wrecking yard off a 70 van, and it looks identical, so i guess i'm good there too.

lemme know about the one piece of trim, and give a total inclusive of shipping to seal beach, ca 90740. thx!

sneezys72 · 12-11-2008, 11:28 PM

How are the window cranks? How much to ship to 85302?

Bpokey · 12-12-2008, 12:24 AM

What is the condition of the taillights and backup lights? Do they have the wiring still on them? Do you still have outside door handles? I am also interested in the clutch block off plate. Shipping to 32506. Thanks!

teeitup · 12-12-2008, 09:27 AM

Rupdog, sorry its bent up
sneezy, I've got window cranks, $10 a set shipped
Bpokeythe wiring is hacked, one backup lens is bad, the taillight lens are pretty good, the metal housings look good, haven't taken them off yet, $10 for the clutch block off plate, for all this $40 shipped, I may have another good backup lens
Thanks Randy

65-72 chevytoys · 12-12-2008, 01:46 PM

If they are not already sold or cracked I will buy the back up lenses and door lock knobs. Just let me know how much and shipping to 32092.

Bpokey · 12-12-2008, 02:09 PM

Thanks, I am going to pass for now. May have to engineer my own wiring.

teeitup · 12-14-2008, 10:29 AM

65-72 chevytoys, I'll try to check them out better this afternoon
bpokey, no problem
Thanks Randy

EyeH8the24 · 12-15-2008, 11:24 AM

got the steering wheel this morning ,thanks !

teeitup · 12-21-2008, 04:30 PM

Glad it got there OK, THANKS SO MUCH, Randy

teeitup · 01-01-2009, 11:47 PM

I relisted some parts that were supposeably sold but never got any payment so please check first page for parts still available. Thanks Randy

**88JRFAN** · 01-04-2009, 02:04 AM

I'll take the caps. Zip-67401 Thanks, Daren

ctucker · 01-04-2009, 01:13 PM

im sorry i didnt see it posted here but that was alot of reading, how much for this if you still got it?
only worry about it if its in good condition,

as you can tell mines all busted up

kb3 · 01-04-2009, 02:36 PM

Hi interested you still have 3 person seat belts
Like to see pics
Thanks

teeitup · 01-04-2009, 07:32 PM

88jrfan, Daren, they are yours I'll get a quote Mon evening
Ctucker, let me check condition of it, I know I sold the piece thats on the far left but I have the middle and right side piece.
KB3, $35 shipped for the set
Thanks Randy

kb3 · 01-04-2009, 08:01 PM

Hi,
Is a money - order OK for the 3 person seat belts if this OK need address,

Thanks
Keith
KB3.

**88JRFAN** · 01-04-2009, 08:05 PM

OK, Thanks Randy. Daren

12-07-2008, 07:46 PM	#101
Rupdog Registered User Join Date: Apr 2007 Location: Riverside, CA 92507 Posts: 129	Re: Parting 72 ochre chevy how much for the tailgate trim (3pcs) and the upper/lower paint line trim that runs below the rear window (3pcs)? assuming these are all originals, and straight? thx!

12-07-2008, 08:10 PM	#102
Rupdog Registered User Join Date: Apr 2007 Location: Riverside, CA 92507 Posts: 129	Re: Parting 72 ochre chevy also need the blockoff plate w/ 2 screws(clutch linkage hole, i think) for the lower firewall. please include shipping to 90740. thx again.

12-07-2008, 11:10 PM	#103
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 ochre chevy Rupdog, the tailgate chrome is not the best shape, chrome is faded and quite a few dents, I probably shouldn't of even put it in the thread. The cab chrome has a couple small dents not bad, its $10 plus shipping. The clutch block off plate is $10 if you buy the cab chrome or $13 shipped by itself. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-07-2008, 11:17 PM	#104
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Parting 72 ochre chevy Randy, I am looking for the hardware, i.e. bolts, nuts, washers and spacers etc. to secure the radiator support to the frame in 67'-68'. Thanks __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

12-09-2008, 01:12 PM	#105
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 ochre chevy Harry, sorry no 67-68's right now. I always just cut the bolt with a torch, so there usually isn't much left of them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-09-2008, 01:26 PM	#106
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Parting 72 ochre chevy Randy, how about one of these rear brake hose bracket and brass "T" retaining bolt. Circled in pic. Also Th350 2wd dipstick Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

12-09-2008, 01:29 PM	#107
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 ochre chevy Jeff, I'll look and see if its on there I have a guy that may be wanting the rearend, so I have to give him first shot at it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-09-2008, 08:52 PM	#109
big dump Registered User Join Date: Mar 2006 Location: Gilbert, AZ Posts: 179	Re: Parting 72 ochre chevy Thanks Randy, going to pass on the sheet metal right now cause I'm not that far along in the project. A/C controller looks great though just as described. Thanks again, Patrick

12-09-2008, 09:45 PM	#110
Rupdog Registered User Join Date: Apr 2007 Location: Riverside, CA 92507 Posts: 129	Re: Parting 72 ochre chevy i guess i'll pass on the trim then. i only needed the passenger side cab trim. is that one good? also, i picked up a blockoff plate today at the wrecking yard off a 70 van, and it looks identical, so i guess i'm good there too. lemme know about the one piece of trim, and give a total inclusive of shipping to seal beach, ca 90740. thx!

12-11-2008, 11:28 PM	#111
sneezys72 Registered User Join Date: Nov 2000 Location: Glendale Az Posts: 73	Re: Parting 72 ochre chevy How are the window cranks? How much to ship to 85302?

12-12-2008, 12:24 AM	#112
Bpokey Registered User Join Date: Sep 2008 Location: Belle Chasse LA Posts: 147	Re: Parting 72 ochre chevy What is the condition of the taillights and backup lights? Do they have the wiring still on them? Do you still have outside door handles? I am also interested in the clutch block off plate. Shipping to 32506. Thanks!

12-12-2008, 09:27 AM	#113
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 ochre chevy Rupdog, sorry its bent up sneezy, I've got window cranks, $10 a set shipped Bpokeythe wiring is hacked, one backup lens is bad, the taillight lens are pretty good, the metal housings look good, haven't taken them off yet, $10 for the clutch block off plate, for all this $40 shipped, I may have another good backup lens Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-12-2008 at 09:28 AM.

12-12-2008, 01:46 PM	#114
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: Parting 72 ochre chevy If they are not already sold or cracked I will buy the back up lenses and door lock knobs. Just let me know how much and shipping to 32092. __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

12-12-2008, 02:09 PM	#115
Bpokey Registered User Join Date: Sep 2008 Location: Belle Chasse LA Posts: 147	Re: Parting 72 ochre chevy Thanks, I am going to pass for now. May have to engineer my own wiring.

12-14-2008, 10:29 AM	#116
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 ochre chevy 65-72 chevytoys, I'll try to check them out better this afternoon bpokey, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

12-15-2008, 11:24 AM	#117
EyeH8the24 Registered User Join Date: Dec 2004 Location: beulah,alabama Posts: 1,075	Re: Parting 72 ochre chevy got the steering wheel this morning ,thanks !

12-21-2008, 04:30 PM	#118
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 ochre chevy Glad it got there OK, THANKS SO MUCH, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-01-2009, 11:47 PM	#119
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 ochre chevy I relisted some parts that were supposeably sold but never got any payment so please check first page for parts still available. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-01-2009 at 11:47 PM.

01-04-2009, 02:04 AM	#120
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Parting 72 ochre chevy I'll take the caps. Zip-67401 Thanks, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

01-04-2009, 01:13 PM	#121
ctucker Registered User Join Date: Apr 2008 Location: fort walton beach florida Posts: 242	Re: Parting 72 ochre chevy im sorry i didnt see it posted here but that was alot of reading, how much for this if you still got it? only worry about it if its in good condition, as you can tell mines all busted up __________________ ~Chris "If your not doing anything then do it quickly!"

01-04-2009, 02:36 PM	#122
kb3 Registered User Join Date: Dec 2007 Location: jeffersonvill in Posts: 131	Re: Parting 72 ochre chevy Hi interested you still have 3 person seat belts Like to see pics Thanks

01-04-2009, 07:32 PM	#123
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting 72 ochre chevy 88jrfan, Daren, they are yours I'll get a quote Mon evening Ctucker, let me check condition of it, I know I sold the piece thats on the far left but I have the middle and right side piece. KB3, $35 shipped for the set Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2009, 08:01 PM	#124
kb3 Registered User Join Date: Dec 2007 Location: jeffersonvill in Posts: 131	Re: Parting 72 ochre chevy Hi, Is a money - order OK for the 3 person seat belts if this OK need address, Thanks Keith KB3.

01-04-2009, 08:05 PM	#125
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Parting 72 ochre chevy OK, Thanks Randy. Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

Register or Log In To remove these advertisements.