CA Parting out 86 chevy suburban 3/4 ton - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

k10shortbox · 01-26-2010, 12:22 AM

but i will for sure take those spacers so just pm me your paypal so i can pay you as soon as possible.
thanks again,
travis

k10shortbox · 01-26-2010, 12:37 AM

I sent the pay pal.
Thanks

85burb · 01-26-2010, 08:08 PM

did it come with bucket seats if so how much for the front seat mounts that are in the floor by the trans hump?

chevybuldr · 01-26-2010, 10:40 PM

Quote:

Originally Posted by 85burb

did it come with bucket seats if so how much for the front seat mounts that are in the floor by the trans hump?

I will take a look at the floor and see if those are still there. I dont think they are.

85burb · 01-26-2010, 11:42 PM

ok mine are not there think mine came with bench. but has buckets now. thanks

chevybuldr · 02-15-2010, 12:56 AM

Still have lots of parts for this.

scooterskoolkustoms · 02-16-2010, 11:48 AM

looking for the metal left and right side behind the rear wheels.just up to the bottom of the lights.

chevybuldr · 02-16-2010, 09:57 PM

Quote:

Originally Posted by scooterskoolkustoms

looking for the metal left and right side behind the rear wheels.just up to the bottom of the lights.

This thing is rusty from the top down so let me take a look at them and see what they look like.

chevybuldr · 03-30-2010, 09:48 AM

bump before its cut up.

staggerd86c-10 · 03-31-2010, 10:40 PM

whats up, you said it was a 3/4ton right? how about the front sawybar? how much to ship to 33181?

chevybuldr · 04-01-2010, 09:20 AM

Quote:

Originally Posted by staggerd86c-10

whats up, you said it was a 3/4ton right? how about the front sawybar? how much to ship to 33181?

I will take 40.00 for the sway bar BUT i have to get it off adn weigh it for shipping. So that price does not include shipping as of yet.

staggerd86c-10 · 04-01-2010, 10:50 AM

ok if shipping isnt too bad i'm all for it, please send me the mounts and all please.

chevybuldr · 04-03-2010, 12:05 AM

Quote:

Originally Posted by staggerd86c-10

ok if shipping isnt too bad i'm all for it, please send me the mounts and all please.

Well shipping would be 35.00

CE20934 · 04-12-2010, 12:05 AM

Do you still have the engine frame stands? If so, how do they look?

shark66 · 04-13-2010, 06:43 PM

Do you still have that sway bar?

chevybuldr · 04-13-2010, 08:21 PM

Quote:

Originally Posted by shark66

Do you still have that sway bar?

Yea I have the sway bar still. 40.00 and 35.00 shipping.

chevybuldr · 04-13-2010, 08:23 PM

Quote:

Originally Posted by CE20934

Do you still have the engine frame stands? If so, how do they look?

I do still have the frame stands. I would have to get them off. 25.00 plus shipping.

Trip59 · 04-14-2010, 02:56 PM

Stil have the tailgate? Need a regulator and sash channel/internal door parts...

chevybuldr · 04-14-2010, 10:33 PM

Quote:

Originally Posted by Trip59

Stil have the tailgate? Need a regulator and sash channel/internal door parts...

It is a power window gate. I have the regulator and motor. Not sure if I have the window channels. Let me know if thats what you need.

Trip59 · 04-14-2010, 10:51 PM

Awesome, I need the motor and regulator, and if possible, the lower channel and sash. Side rails not important. Can ya send me a quote for it shipped to 32068?

CE20934 · 04-15-2010, 08:06 PM

Quote:

Originally Posted by chevybuldr

I do still have the frame stands. I would have to get them off. 25.00 plus shipping.

Sounds fine to me. How much would shipping be to 48240?

chevybuldr · 04-16-2010, 09:10 PM

Quote:

Originally Posted by CE20934

Sounds fine to me. How much would shipping be to 48240?

Large flat rate box 15.00

chevybuldr · 04-16-2010, 09:12 PM

Quote:

Originally Posted by Trip59

Awesome, I need the motor and regulator, and if possible, the lower channel and sash. Side rails not important. Can ya send me a quote for it shipped to 32068?

Shipping would be 18.00 via postal. 20.00 for the motor and 40.00 for the regulator. The motor and regulator need to be put back together. Sombody wanted just the motor and then changed there minds.

chevybuldr · 04-16-2010, 09:20 PM

Quote:

Originally Posted by Trip59

Awesome, I need the motor and regulator, and if possible, the lower channel and sash. Side rails not important. Can ya send me a quote for it shipped to 32068?

What numbers do you need?

Curly86 · 04-16-2010, 10:10 PM

Does it have delay wipers on it? if it does is the wiper delay module still on it ? it mounts under the steering column it is a small square plastic box with wire plugged in both sides

01-26-2010, 12:22 AM	#101
k10shortbox Registered User Join Date: Mar 2009 Location: Sioux Falls, SD Posts: 44	Re: Parting out 86 chevy suburban 3/4 ton but i will for sure take those spacers so just pm me your paypal so i can pay you as soon as possible. thanks again, travis

01-26-2010, 12:37 AM	#102
k10shortbox Registered User Join Date: Mar 2009 Location: Sioux Falls, SD Posts: 44	Re: Parting out 86 chevy suburban 3/4 ton I sent the pay pal. Thanks

01-26-2010, 08:08 PM	#103
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Parting out 86 chevy suburban 3/4 ton did it come with bucket seats if so how much for the front seat mounts that are in the floor by the trans hump? __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

01-26-2010, 11:42 PM	#105
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: Parting out 86 chevy suburban 3/4 ton ok mine are not there think mine came with bench. but has buckets now. thanks __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

02-15-2010, 12:56 AM	#106
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: Parting out 86 chevy suburban 3/4 ton Still have lots of parts for this.

02-16-2010, 11:48 AM	#107
scooterskoolkustoms Registered User Join Date: Feb 2010 Location: so cal Posts: 436	Re: Parting out 86 chevy suburban 3/4 ton looking for the metal left and right side behind the rear wheels.just up to the bottom of the lights. __________________ big old burb in primer.lot of work to do.

03-30-2010, 09:48 AM	#109
chevybuldr Registered User Join Date: Oct 2008 Location: Livermore ca Posts: 699	Re: Parting out 86 chevy suburban 3/4 ton bump before its cut up.

03-31-2010, 10:40 PM	#110
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: Parting out 86 chevy suburban 3/4 ton whats up, you said it was a 3/4ton right? how about the front sawybar? how much to ship to 33181?

04-01-2010, 10:50 AM	#112
staggerd86c-10 Squarebody Aficionado Join Date: May 2008 Location: Miami, FL Posts: 713	Re: Parting out 86 chevy suburban 3/4 ton ok if shipping isnt too bad i'm all for it, please send me the mounts and all please.

04-12-2010, 12:05 AM	#114
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	Re: Parting out 86 chevy suburban 3/4 ton Do you still have the engine frame stands? If so, how do they look? __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed

04-13-2010, 06:43 PM	#115
shark66 Registered User Join Date: Mar 2010 Location: Berlin, Maryland Posts: 27	Re: Parting out 86 chevy suburban 3/4 ton Do you still have that sway bar?

04-14-2010, 02:56 PM	#118
Trip59 Who needs sleep... Join Date: Aug 2009 Location: Middleburg, Florida Posts: 260	Re: Parting out 86 chevy suburban 3/4 ton Stil have the tailgate? Need a regulator and sash channel/internal door parts... __________________ Trip 72 GMC 1/2T LWB Build and Project Blog: http://72.tripbauer.com/

04-14-2010, 10:51 PM	#120
Trip59 Who needs sleep... Join Date: Aug 2009 Location: Middleburg, Florida Posts: 260	Re: Parting out 86 chevy suburban 3/4 ton Awesome, I need the motor and regulator, and if possible, the lower channel and sash. Side rails not important. Can ya send me a quote for it shipped to 32068? __________________ Trip 72 GMC 1/2T LWB Build and Project Blog: http://72.tripbauer.com/

04-16-2010, 10:10 PM	#125
Curly86 You want it there when??? Join Date: Oct 2006 Location: Lewisburg Ky Posts: 393	Re: Parting out 86 chevy suburban 3/4 ton Does it have delay wipers on it? if it does is the wiper delay module still on it ? it mounts under the steering column it is a small square plastic box with wire plugged in both sides __________________ 1986 Silverado Flatbed 400 SB with 350 turbo 1997 Ford Explorer with 302 mydrive to work ride 1978 Gmc Midas RV 21ft with 46,000 actual miles 2003 Chevy Avalanche 5.3 327 and Tweety Bird Yellow Big Sandy Survivor 09 Trucks in the Blue Grass Survivor 09 TNCTC Streetcruzin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.