72, 2wd blazer - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lolife99** · 06-18-2014, 10:24 AM

Quote:

Originally Posted by YBNORML

Things have been slowly coming together. Ran into a few problems.

When I decided to go with the PB control arms I never factored in the lack of a spring pocket which in turn raises the truck about two inches. More work

I would assume this is a good thing to help with ground clearance.
I assume you just cut the springs?
A set of air bags would work nicely up front.
(even only up front for now)
So nice to raise it up to change oil, or slip a floor jack under it.
(I know,... more money) Ha

YBNORML · 06-18-2014, 11:03 AM

Quote:

Originally Posted by lolife99

I would assume this is a good thing to help with ground clearance.
I assume you just cut the springs?
A set of air bags would work nicely up front.
(even only up front for now)
So nice to raise it up to change oil, or slip a floor jack under it.
(I know,... more money) Ha

It's definately a good thing, just something I never thought of that's all. I do plan on cutting them. One full coil should do nicely. I would love to bag it but the truck account is empty. Next winter maybe

Slammed66 · 06-19-2014, 12:22 AM

Okay, got it ! , one full accuair setup ready for early November.... No problem..

YBNORML · 06-19-2014, 01:32 AM

Quote:

Originally Posted by Slammed66

Okay, got it ! , one full accuair setup ready for early November.... No problem..

Haha! I wish. If she gets air it will probably be a little more low tech.

YBNORML · 06-19-2014, 01:38 AM

Well I went ahead and chopped one coil off. I should have gone a half coil first. She's sitting a little lower than before. I like it but now the rake is pretty severe. I do plan on dropping the rear another 1-1/4" and that might pull the front up a hair as well.

YBNORML · 06-24-2014, 10:15 PM

Picking her up from the alignment shop. My alignment guy was quite impressed with the PB control arms. Said he had no issues bringing them in line. Took him about double the time to do the alignment but that had more to do with the lowered stance.

YBNORML · 06-29-2014, 01:12 AM

Picked it up from the tranny shop on Friday. Made it about 1/4 of the way home and the skies opened up. Got pretty soaked. Kinda funny actually, the wife was driving behind me and snapped a pic. Other drivers sure look at you funny

VA72C10 · 06-29-2014, 01:26 AM

Quote:

Originally Posted by YBNORML

It's definately a good thing, just something I never thought of that's all. I do plan on cutting them. One full coil should do nicely. I would love to bag it but the truck account is empty. Next winter maybe

You can get a pair of bags, brackets, fittings, line, and scrhader valves for under 300 if you shop around (I've spent under 250 for all of that new before). That will allow you to set the front where you want it and then be able to raise up for service...

You can do a complete air ride suspension front and rear with paddle valves (or a nicer simple setup like dloe's valves) for around 1000. Since a pair of lowering springs is around 300...that's 700 more for a fully adjustable suspension....

Or just Schraders all around for around 500 or less if you find a deal... So a couple hundred more for a fully adjustable suspension

VA72C10 · 06-29-2014, 01:27 AM

And I actually like the rake! Looks good! Didn't noticed you'd already chopped the spring...was thinking you could sell the springs- which maybe someone would want this stance

YBNORML · 09-09-2014, 12:40 AM

Some fresh pics, this one is from the lake lot.

YBNORML · 09-09-2014, 12:42 AM

And one from home.

BigCountryx · 09-09-2014, 08:32 AM

Stunning

zammer · 09-09-2014, 09:20 AM

very nice stance looks great!

YBNORML · 09-13-2014, 01:57 PM

Quote:

Originally Posted by BigCountryx

Stunning

Thanks!

Quote:

Originally Posted by zammer

very nice stance looks great!

Thanks!

**lolife99** · 09-13-2014, 04:13 PM

I would love to own your blazer!

Hankster · 02-21-2015, 07:56 PM

Just skimmed threw your thread! Love this thing!

YBNORML · 02-24-2015, 10:24 PM

Quote:

Originally Posted by lolife99

I would love to own your blazer!

Haha. Thanks

Quote:

Originally Posted by Hankster

Just skimmed threw your thread! Love this thing!

Thanks a lot. Another month or so and I'll drag it back out and get her ready for the summer.

YBNORML · 07-09-2015, 08:23 PM

I asked the boys in Photoshop thread to slam her for me. What do you think? I am seriously considering parting out my shortbox and using the applicable parts on the Blazer and downsizing my collection. The whole family fits in the Blazer.

YBNORML · 07-09-2015, 08:27 PM

Here's a pic of the Shortbox.

gringoloco · 08-16-2015, 06:10 AM

I say do it! Though it looks good as-is, it will be absolutely stunning slammed. Keeping the back seat is an imperative challenge, though. Did I mention do it?

**SOON2BLAZE** · 08-23-2015, 03:25 PM

Nice ride, both of them.

C10_ustacould · 10-15-2015, 07:56 AM

What did you decide on the chassis?

YBNORML · 10-15-2015, 09:54 AM

Quote:

Originally Posted by C10_ustacould

What did you decide on the chassis?

I haven't really decided yet. I've actually gotten a lot of blowback from friends and family, especially my wife I knew there was a reason why I love that woman!!
The Shortbox is my first vehicle, I've had her for 24 years and everyone else thinks I'd be stupid to give up on her.

Hankster · 11-01-2015, 04:51 PM

Yeah I say keep the shortbed.

84blaze · 07-16-2016, 06:40 PM

Keep the short bed. I know Porterbuilt just came out with a kit for you 2wd blazer guys. At the end of the day, it's only money.

06-19-2014, 12:22 AM	#103
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: 72, 2wd blazer Okay, got it ! , one full accuair setup ready for early November.... No problem.. __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

06-19-2014, 01:38 AM	#105
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: 72, 2wd blazer Well I went ahead and chopped one coil off. I should have gone a half coil first. She's sitting a little lower than before. I like it but now the rake is pretty severe. I do plan on dropping the rear another 1-1/4" and that might pull the front up a hair as well. Attached Images

06-24-2014, 10:15 PM	#106
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: 72, 2wd blazer Picking her up from the alignment shop. My alignment guy was quite impressed with the PB control arms. Said he had no issues bringing them in line. Took him about double the time to do the alignment but that had more to do with the lowered stance. Attached Images Last edited by YBNORML; 06-24-2014 at 10:27 PM.

06-29-2014, 01:12 AM	#107
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: 72, 2wd blazer Picked it up from the tranny shop on Friday. Made it about 1/4 of the way home and the skies opened up. Got pretty soaked. Kinda funny actually, the wife was driving behind me and snapped a pic. Other drivers sure look at you funny Attached Images

06-29-2014, 01:27 AM	#109
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 72, 2wd blazer And I actually like the rake! Looks good! Didn't noticed you'd already chopped the spring...was thinking you could sell the springs- which maybe someone would want this stance __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-09-2014, 12:40 AM	#110
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: 72, 2wd blazer Some fresh pics, this one is from the lake lot. Attached Images

09-09-2014, 12:42 AM	#111
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: 72, 2wd blazer And one from home. Attached Images

09-09-2014, 08:32 AM	#112
BigCountryx Registered User Join Date: May 2009 Location: Gonzales, LA Posts: 779	Re: 72, 2wd blazer Stunning __________________ 1972 Pale Yella 2WD Blazer ..... 350HO/700R4.... '68 Clipped 1970 Original Paint SWB Farm Truck ..... 5.3/4L80.... 2x HRPT Participant

09-09-2014, 09:20 AM	#113
zammer Addicted user Join Date: Sep 2009 Location: Edmonton, Alberta Posts: 370	Re: 72, 2wd blazer very nice stance looks great! __________________ 1972 2wd Blazer - 95% completed 2015 Silverado 1500 4wd -z 2008 AERO 9-7X (TBSS cousin) LS2 1970 Jimmy 4wd - future project

09-13-2014, 04:13 PM	#115
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 72, 2wd blazer I would love to own your blazer! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-21-2015, 07:56 PM	#116
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: 72, 2wd blazer Just skimmed threw your thread! Love this thing! __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

07-09-2015, 08:23 PM	#118
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: 72, 2wd blazer I asked the boys in Photoshop thread to slam her for me. What do you think? I am seriously considering parting out my shortbox and using the applicable parts on the Blazer and downsizing my collection. The whole family fits in the Blazer. Attached Images __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

07-09-2015, 08:27 PM	#119
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: 72, 2wd blazer Here's a pic of the Shortbox. Attached Images __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

08-16-2015, 06:10 AM	#120
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 72, 2wd blazer I say do it! Though it looks good as-is, it will be absolutely stunning slammed. Keeping the back seat is an imperative challenge, though. Did I mention do it? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

08-23-2015, 03:25 PM	#121
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: 72, 2wd blazer Nice ride, both of them.



Register or Log In To remove these advertisements.

10-15-2015, 07:56 AM	#122
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 72, 2wd blazer What did you decide on the chassis? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

11-01-2015, 04:51 PM	#124
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: 72, 2wd blazer Yeah I say keep the shortbed. __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

07-16-2016, 06:40 PM	#125
84blaze Registered User Join Date: Mar 2013 Location: Edmonton, AB Posts: 298	Re: 72, 2wd blazer Keep the short bed. I know Porterbuilt just came out with a kit for you 2wd blazer guys. At the end of the day, it's only money. __________________ 1953 Chevrolet 1300: S10 frame swap/ GSI Backhalf/ 6.0LSX 1984 S10 Blazer: 6.0L LQ4 Swap FOLLOW ME ON INSTAGRAM - @84blaze

Register or Log In To remove these advertisements.