Project "Never Again" will I rebuild a perfectly good truck - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chapster · 03-25-2012, 12:29 PM

I have not completely decided on the dash but I am leaning towards keeping stock configuration now that the New carbon fibre Dakota Digital gauges are out.

chapster · 03-25-2012, 01:02 PM

Above is also the install of the cam, springs and seal pics.

Also picked up a original owner parts truck that has some goodies with it. The stepside fenders were removed at 10000 km's and hung in a barn.

**67cheby** · 03-25-2012, 02:02 PM

Wow great score
Posted via Mobile Device

chapster · 03-25-2012, 08:54 PM

Ya I picked it up for a $100.00 but he wants the frame back for a hay wagon....lol

Now I don't know which box to go with. I finally had decided to go with a fleet but now I have a set of really nice steps.....

Dingfodgy · 03-26-2012, 01:51 AM

Quote:

Originally Posted by chapster

Above is also the install of the cam, springs and seal pics.

Also picked up a original owner parts truck that has some goodies with it. The stepside fenders were removed at 10000 km's and hung in a barn.

Gotta say- your attention to detail and parts selection is abso-freakin-lutely amazing. The rear meats are just disgustingly kick-a$$! Love everything you've done so far.

BTW- If you aren't going to use the side trim on your parts truck, let me know- I'd be interested in "acquiring" them.

**67cheby** · 03-26-2012, 09:40 AM

thats a tough call with that nice a set of step fenders....

chapster · 03-26-2012, 06:05 PM

Quote:

Originally Posted by 67cheby

thats a tough call with that nice a set of step fenders....

Ya you are telling me, I find myself collecting more parts than actually working on the project.

I also have a 66 frame that is powder coated with new bushings and front end components which was intended to be converted over for a parts truck to fund my parts.

It seems it may turn into project #2. I didn't want to go there as it takes money away from the main build but these C10's are an addiction....lol

chapster · 04-03-2012, 08:25 PM

Quote:

Originally Posted by Dingfodgy

Gotta say- your attention to detail and parts selection is abso-freakin-lutely amazing. The rear meats are just disgustingly kick-a$$! Love everything you've done so far.

BTW- If you aren't going to use the side trim on your parts truck, let me know- I'd be interested in "acquiring" them.

Thanks Dingfodgy, I will keep you in mind on the trim.

Looks like this will be the new front pulley set I have decided to run. What do you guy's think?

mcbassin · 04-03-2012, 11:11 PM

Very cool project!

68GMCCustom · 04-03-2012, 11:24 PM

I like the pulley setup....not much for the air filter.

chapster · 04-04-2012, 06:39 PM

Quote:

Originally Posted by 68GMCCustom

I like the pulley setup....not much for the air filter.

Ya I agree, the air cleaner is not working for me either.

I will be running the stock LS2 EFI corvette style intake with stainless tube to free flowing air cleaner providing I can. It was suggested to me that I might have to run a the fast intake with that pulley system, hope not.

**Dieselwrencher** · 04-04-2012, 07:25 PM

Those pulleys are super nice!

chapster · 04-06-2012, 12:02 AM

Well, still looking for the rest of the info. but it turns out I cannot use the Pro Track pulley kit with the factory Electronic TB. It took me 3 months to decide on a system. Arrggg!

Still waiting to see if a fast intake will work.

ghostrider69 · 04-06-2012, 12:55 AM

Quote:

Originally Posted by chapster

I have been really busy the last 6 months but thought I would bring it closer up to date. I have spent way to much on hard lines but sure is worth it in the end.

Let me know what you guy's think.....

awesome build that you got your self into,,keep up the good work ,,i restored my 70 C10 FROM THE FRAME UP,,,and it took me almost 4 years :Chevy:

ghostrider69 · 04-06-2012, 01:12 AM

Quote:

Originally Posted by chapster

Thanks Dingfodgy, I will keep you in mind on the trim.

Looks like this will be the new front pulley set I have decided to run. What do you guy's think?

really nice looking engine ,,almost to clean to use ,,,put it in a glass box and just show it off ,,lol,,,cool build

chapster · 04-06-2012, 09:29 AM

That picture above is from the March performance sight. I was just indicating the front pulley kit I was hoping to use. If anyone has information on fitment with stock TB please chime in.

longbed67 · 04-06-2012, 09:52 AM

How have I missed this build until now! I do like the pulley set up but with as much show quality items that are going into this build would it look better in polished over brushed?

chapster · 04-06-2012, 11:56 AM

I was looking at polished and black but they do not do that for the Pro Track. If I cannot run the Pro track with my set up I may go to the full polished Style Track system because it doesn't look as good in Black oynx / alum. mix.

The_BullDog · 05-16-2012, 06:28 AM

Looks great! really like the flush front window mod.

Bennett68C10 · 06-28-2012, 03:50 PM

Any updates on this one, have you decided what Bed your going to run.
Posted via Mobile Device

chapster · 07-15-2012, 11:54 PM

Not much to update Bennett, I am now back on my feet again from on going medical issues the last couple of years but I am determined to finish this dam truck if it is the last thing I do.......lol

Not decided on the bed yet as it seems so far away. I did work out all the confusion on the March Pro Track black oynx pulley kit and now have it in the parts pile.

Next thing I need to determine is if I can run the No Limit R & P with my Porterbuilt arms & swaybar. I am to far along to go to an aftermarket crossmember but would love to upgrade to R & P.

hot trux · 07-16-2012, 08:08 AM

nice build!!!!

Ls68 · 07-16-2012, 12:49 PM

nice looking good

chapster · 07-17-2012, 06:22 PM

Just ordered No Limits Rack and Pinion and a longer set of links for my Porterbuilt swaybar.

A big thanks to Rob, Nate & Dave for helping me determine fitment.

Ls68 · 07-17-2012, 06:59 PM

I like your wheel set up just rite not to wide out back how much did you narrow you axel to fit those wheels.

03-25-2012, 12:29 PM	#101
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Project "Never Again" will I rebuild a perfectly good truck I have not completely decided on the dash but I am leaning towards keeping stock configuration now that the New carbon fibre Dakota Digital gauges are out. Attached Images __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project) Last edited by chapster; 03-25-2012 at 12:51 PM.

03-25-2012, 01:02 PM	#102
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Project "Never Again" will I rebuild a perfectly good truck Above is also the install of the cam, springs and seal pics. Also picked up a original owner parts truck that has some goodies with it. The stepside fenders were removed at 10000 km's and hung in a barn. Attached Images __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project) Last edited by chapster; 03-25-2012 at 01:26 PM.

03-25-2012, 02:02 PM	#103
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project "Never Again" will I rebuild a perfectly good truck Wow great score Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-25-2012, 08:54 PM	#104
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Project "Never Again" will I rebuild a perfectly good truck Ya I picked it up for a $100.00 but he wants the frame back for a hay wagon....lol Now I don't know which box to go with. I finally had decided to go with a fleet but now I have a set of really nice steps..... __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

03-26-2012, 09:40 AM	#106
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project "Never Again" will I rebuild a perfectly good truck thats a tough call with that nice a set of step fenders.... __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-03-2012, 11:11 PM	#109
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "Never Again" will I rebuild a perfectly good truck Very cool project! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-03-2012, 11:24 PM	#110
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Project "Never Again" will I rebuild a perfectly good truck I like the pulley setup....not much for the air filter. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

04-04-2012, 07:25 PM	#112
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Project "Never Again" will I rebuild a perfectly good truck Those pulleys are super nice! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-06-2012, 12:02 AM	#113
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Project "Never Again" will I rebuild a perfectly good truck Well, still looking for the rest of the info. but it turns out I cannot use the Pro Track pulley kit with the factory Electronic TB. It took me 3 months to decide on a system. Arrggg! Still waiting to see if a fast intake will work. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

04-06-2012, 09:29 AM	#116
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Project "Never Again" will I rebuild a perfectly good truck That picture above is from the March performance sight. I was just indicating the front pulley kit I was hoping to use. If anyone has information on fitment with stock TB please chime in. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

04-06-2012, 09:52 AM	#117
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project "Never Again" will I rebuild a perfectly good truck How have I missed this build until now! I do like the pulley set up but with as much show quality items that are going into this build would it look better in polished over brushed? __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

04-06-2012, 11:56 AM	#118
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Project "Never Again" will I rebuild a perfectly good truck I was looking at polished and black but they do not do that for the Pro Track. If I cannot run the Pro track with my set up I may go to the full polished Style Track system because it doesn't look as good in Black oynx / alum. mix. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

05-16-2012, 06:28 AM	#119
The_BullDog Registered User Join Date: May 2010 Location: Orange Park Florida Posts: 204	Re: Project "Never Again" will I rebuild a perfectly good truck Looks great! really like the flush front window mod.

06-28-2012, 03:50 PM	#120
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Never Again" will I rebuild a perfectly good truck Any updates on this one, have you decided what Bed your going to run. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-15-2012, 11:54 PM	#121
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Project "Never Again" will I rebuild a perfectly good truck Not much to update Bennett, I am now back on my feet again from on going medical issues the last couple of years but I am determined to finish this dam truck if it is the last thing I do.......lol Not decided on the bed yet as it seems so far away. I did work out all the confusion on the March Pro Track black oynx pulley kit and now have it in the parts pile. Next thing I need to determine is if I can run the No Limit R & P with my Porterbuilt arms & swaybar. I am to far along to go to an aftermarket crossmember but would love to upgrade to R & P. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)



Register or Log In To remove these advertisements.

07-16-2012, 08:08 AM	#122
hot trux '85 Stepside Join Date: Jan 2006 Location: montgomery city mo. Posts: 360	Re: Project "Never Again" will I rebuild a perfectly good truck nice build!!!!

07-16-2012, 12:49 PM	#123
Ls68 Registered User Join Date: Jul 2012 Location: RGV Texas Posts: 14	Re: Project "Never Again" will I rebuild a perfectly good truck nice looking good

07-17-2012, 06:22 PM	#124
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Project "Never Again" will I rebuild a perfectly good truck Just ordered No Limits Rack and Pinion and a longer set of links for my Porterbuilt swaybar. A big thanks to Rob, Nate & Dave for helping me determine fitment. __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

07-17-2012, 06:59 PM	#125
Ls68 Registered User Join Date: Jul 2012 Location: RGV Texas Posts: 14	Re: Project "Never Again" will I rebuild a perfectly good truck I like your wheel set up just rite not to wide out back how much did you narrow you axel to fit those wheels.

Register or Log In To remove these advertisements.