Project Picacho - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 03-10-2011, 08:45 PM

Truck is really comming together..

CheyenneShop · 03-10-2011, 11:55 PM

Well -I am a little bummed as I am not going to get "Picacho" done for GG this weekend. I ran into a few snags with the brakes tonight that pretty much squashed it for me.

Oh well, I am very appreciative to Nathan (Porterbuilt), and Scott (SM Powdercoat) and a few neighbor buddy's who have helped me try and meet my goal. It was a little hectic the last few days - but still a lot of fun!

Thanks again for all the comments and support guys!

c10seconds · 03-11-2011, 12:08 AM

Come on ronnie! What's the hold up??
Posted via Mobile Device

SCOTTMO · 03-11-2011, 12:32 AM

Ronnie,
Sorry to hear this as i was looking forward to seeing it out there.i plan on going out Saturday,if you go maybe i will see you there.
were you not able to get the calipers back together ?
let me know if there is anything i can do.

CheyenneShop · 03-11-2011, 01:39 AM

Quote:

Originally Posted by c10seconds

Come on ronnie! What's the hold up??
Posted via Mobile Device

I'm in tears over here - Come on

Thanks for the brake lines too!

Quote:

Originally Posted by SCOTTMO

Ronnie,
Sorry to hear this as i was looking forward to seeing it out there.i plan on going out Saturday,if you go maybe i will see you there.
were you not able to get the calipers back together ?
let me know if there is anything i can do.

Ya. Scott - ended up not able to get the calipers back together (tore a seal) and the rear seals for the hub will not go in AT ALL! I had a few of my neighbors over here to see what they thought and after destroying both of them - going to both O'Riely's & Autozone, to see if they might either have them or one that would actually fit the hub - came up empty.

I work tomorrow, so not a lot happening - except for a few calls to Mcgaughy's to find out about this hub/bearing seal debacle!

I will probably head out there Sat too so maybe I will see ya.

Ronnie

67chevy1series · 03-11-2011, 01:50 AM

ahhhh ronnie that sucks man! well i am still glad you made a goal so close( because you did a lot just to get it ready) without that goal you woudnt have done waht you all did

CheyenneShop · 03-11-2011, 01:52 AM

Thanks Rick - we did get a ton done and it was fun hangin with my buddies!

VA72C10 · 03-11-2011, 01:53 AM

So nobody can trailer it for you so you could show it as "under construction"

67chevy1series · 03-11-2011, 01:54 AM

Quote:

Originally Posted by theCheyenneShop

Thanks Rick - we did get a ton done and it was fun hangin with my buddies!

ronie i only wish i was closer to have my scronny @$$ helpin out!!!!

FRENCHBLUE72 · 03-11-2011, 09:57 AM

That sucks that its something so simple holding you up.. I think id try a mom and pop autostore may have better luck with the seals.

gringoloco · 03-11-2011, 11:00 AM

Any chance of just slapping stock brakes on it for the time being?

SCOTTMO · 03-11-2011, 11:07 AM

Well,let me know.i will do whatever i can to help you when you get back on it.if you want me to look at the calipers or whatever let me know.
I will be home all day.
have fun training at work..

CheyenneShop · 03-11-2011, 05:59 PM

Quote:

Originally Posted by VA72C10

So nobody can trailer it for you so you could show it as "under construction"

I have a trailer so maybe that is what I will do - since I paid for registration!! But I would rather sit in my garage and work on it then be teased by all those pretty trucks -

Quote:

Originally Posted by 67chevy1series

ronie i only wish i was closer to have my scronny @$$ helpin out!!!!

I'd put that skinny a$$ to work for sure!

Quote:

Originally Posted by FRENCHBLUE72

That sucks that its something so simple holding you up.. I think id try a mom and pop autostore may have better luck with the seals.

Some good news - I got some parts coming tomorrow - so I will see what happens. "So your saying there's a chance"!!!!

Quote:

Originally Posted by gringoloco

Any chance of just slapping stock brakes on it for the time being?

No - as it has the Mcgaughy rotors! Plus axles have been cut down to fit rotors.

Quote:

Originally Posted by SCOTTMO

Well,let me know.i will do whatever i can to help you when you get back on it.if you want me to look at the calipers or whatever let me know.
I will be home all day.
have fun training at work..

Just got back from training - and it was fun/good. I called Napa and they are going to get some parts in tomorrow morning so that I might try for a round 2 - I will see where I get, and let ya know where I get - thanks for all the support guys - Ronnie

67chevy1series · 03-11-2011, 07:16 PM

Quote:

Originally Posted by theCheyenneShop

I'd put that skinny a$$ to work for sure!
- Ronnie

i am used to it, ( i didnt have my passenger fender at my house) built my 67 in a day ( had to throw it together to move), yep in one day i built my truck with a little help from my mopm but just a little she helped lift a couple things....haha

FRENCHBLUE72 · 03-11-2011, 07:19 PM

Here's hoping all goes well and you make it..

CheyenneShop · 03-11-2011, 10:12 PM

Quote:

Originally Posted by FRENCHBLUE72

Here's hoping all goes well and you make it..

thanks Frenchy

franky69c10 · 03-11-2011, 10:14 PM

Man hope u get everything done for GG's I would love 2 check this out this weekend
Posted via Mobile Device

CheyenneShop · 03-11-2011, 10:19 PM

Quote:

Originally Posted by franky69c10

Man hope u get everything done for GG's I would love 2 check this out this weekend
Posted via Mobile Device

I am shooting for Sunday now! Unless I make crazy progress tomorrow!!!! Sunday is usually when I take my family, so that would be fun.

I'm optimistic

Hope to see you there bro - Ronnie

CheyenneShop · 03-14-2011, 06:18 PM

Well - "Picacho"didn't make the show - but I got a lot of work done - so really just a few things to wrap up and he'll be on the road!

Front brakes came out really nice!
Name: P1070272.jpg
Views: 1747
Size: 53.9 KB

Name: P1070272.jpg
Views: 1747
Size: 53.9 KB

Name: P1070273.JPG
Views: 1743
Size: 90.3 KB

Back brakes too!
Name: P1070274.jpg
Views: 1731
Size: 51.3 KB

I really love the way it sits!
Name: P1070275.jpg
Views: 1747
Size: 40.6 KB

Name: P1070276.jpg
Views: 1734
Size: 39.9 KB

**72k5zl1** · 03-14-2011, 06:28 PM

boy! that looks good. dont repaint it. i wish mine had that patina. want to trade sheet metal? lol

CheyenneShop · 03-14-2011, 06:58 PM

Quote:

Originally Posted by 72k5zl1

boy! that looks good. dont repaint it. i wish mine had that patina. want to trade sheet metal? lol

Yeah - that is the plan - i love the patina, thanks for looking - I love your build!

Ronnie

67chevy1series · 03-14-2011, 07:03 PM

that looks really really good can i still trade ou my 67 for your 68?

haha just jokin, i could never do that, this truck has sentimental value to me since it is my first truck

SCOTTMO · 03-14-2011, 07:05 PM

Awesome Ronnie,that orange looks killer now!
now you can do mine since you have all the frustrations behide you...

VA72C10 · 03-14-2011, 07:09 PM

looks awesome!

CheyenneShop · 03-14-2011, 07:10 PM

Quote:

Originally Posted by 67chevy1series

that looks really really good can i still trade ou my 67 for your 68?

Lets not and say we did!!!!

haha just jokin, i could never do that, this truck has sentimental value to me since it is my first truck

Yeah - u gotta keep it!

03-10-2011, 08:45 PM	#101
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Picacho Truck is really comming together.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-10-2011, 11:55 PM	#102
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: Project Picacho Well -I am a little bummed as I am not going to get "Picacho" done for GG this weekend. I ran into a few snags with the brakes tonight that pretty much squashed it for me. Oh well, I am very appreciative to Nathan (Porterbuilt), and Scott (SM Powdercoat) and a few neighbor buddy's who have helped me try and meet my goal. It was a little hectic the last few days - but still a lot of fun! Thanks again for all the comments and support guys! __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

03-11-2011, 12:08 AM	#103
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Project Picacho Come on ronnie! What's the hold up?? Posted via Mobile Device

03-11-2011, 12:32 AM	#104
SCOTTMO powdercoater Join Date: Dec 2008 Location: mesa,az Posts: 203	Re: Project Picacho Ronnie, Sorry to hear this as i was looking forward to seeing it out there.i plan on going out Saturday,if you go maybe i will see you there. were you not able to get the calipers back together ? let me know if there is anything i can do. __________________ SCOTT

03-11-2011, 01:50 AM	#106
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project Picacho ahhhh ronnie that sucks man! well i am still glad you made a goal so close( because you did a lot just to get it ready) without that goal you woudnt have done waht you all did

03-11-2011, 01:52 AM	#107
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: Project Picacho Thanks Rick - we did get a ton done and it was fun hangin with my buddies! __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

03-11-2011, 01:53 AM	#108
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Picacho So nobody can trailer it for you so you could show it as "under construction" __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-11-2011, 09:57 AM	#110
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Picacho That sucks that its something so simple holding you up.. I think id try a mom and pop autostore may have better luck with the seals. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-11-2011, 11:00 AM	#111
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Project Picacho Any chance of just slapping stock brakes on it for the time being? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

03-11-2011, 11:07 AM	#112
SCOTTMO powdercoater Join Date: Dec 2008 Location: mesa,az Posts: 203	Re: Project Picacho Well,let me know.i will do whatever i can to help you when you get back on it.if you want me to look at the calipers or whatever let me know. I will be home all day. have fun training at work.. __________________ SCOTT

03-11-2011, 07:19 PM	#115
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Picacho Here's hoping all goes well and you make it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-11-2011, 10:14 PM	#117
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Project Picacho Man hope u get everything done for GG's I would love 2 check this out this weekend Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

03-14-2011, 06:18 PM	#119
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: Project Picacho Well - "Picacho"didn't make the show - but I got a lot of work done - so really just a few things to wrap up and he'll be on the road! Front brakes came out really nice! Back brakes too! I really love the way it sits! __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

03-14-2011, 06:28 PM	#120
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: Project Picacho boy! that looks good. dont repaint it. i wish mine had that patina. want to trade sheet metal? lol __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

03-14-2011, 07:03 PM	#122
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project Picacho that looks really really good can i still trade ou my 67 for your 68? haha just jokin, i could never do that, this truck has sentimental value to me since it is my first truck



Register or Log In To remove these advertisements.

03-14-2011, 07:05 PM	#123
SCOTTMO powdercoater Join Date: Dec 2008 Location: mesa,az Posts: 203	Re: Project Picacho Awesome Ronnie,that orange looks killer now! now you can do mine since you have all the frustrations behide you... __________________ SCOTT

03-14-2011, 07:09 PM	#124
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Picacho looks awesome! __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.