OR Parting out 1970 GMC C10 350,TH350, 3.73 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roger0080 · 01-04-2011, 10:23 AM

Okay, I'll buy the faceplate too if you can get an answer on the mirror. I'll wait a couple more days for an answer back. -Roger

butternut1972 · 01-04-2011, 11:18 AM

I will take the wiring harness. Sorry i pm'd you instaed of posting in the thread. Did you end up selling the vent windows? Also you mentioned you will have parts at the Canby swap meet. are you still going to be there?

*sharpie1972* · 01-04-2011, 11:25 AM

As promised I'll let butternut have first shot. I'm out on any other parts. Good luck with the rest of your sales. Sharpie

bollybib · 01-04-2011, 11:54 AM

Quote:

Originally Posted by tll74

bollybib: 4.00 for clamp bolt nut washer 4.95 shipping usps. Anything else you need to soften the shipping cost?

OK $8.95 total sounds good to me. That's all I really need at the moment, mine is broken. I see ppl paying for stuff here using paypal. I have paypal acct or I can send you a classic check.

mgkgmc · 01-04-2011, 08:27 PM

Ill take the belts,visors and the armrests . What shape are the armrests and do you still have the heater vents on the top of the dash and what shape are they and color? I didnt mean to take so long on the reply I works nights. thanks

sjarrett71 · 01-04-2011, 09:26 PM

Are the following parts still available:

COMPLETE shifter linkage?
Vacuum line from trans to carb?
Fitting on intake manifold to attach the vacuum line?

I had asked about the slip yoke but I will pass on that. Thanks.

**tll74** · 01-04-2011, 09:36 PM

bollybib: Paypal would be best PM sent with info.

sharpie72: your a good sport, thanks

butternut72: the underdash wiring is yours pending payment.

roger0080: You are down for the following:

rear view mirror
speedo face plate
Fuel line to carb
Oil Pressure line
Headlight switch with knob
Cigar lighter
alternator brackets
double groove water pump pulley
How much for the SPID itself? free with your purchase

skeeterbug: 8.85 via ups

Solego: rear cross member 30.00 shipping 16.54 and dip it for FREE.

breeh: shipping would be 17.14 how about 85.00 shipped?

burb71: 17.50 shipped for a pair.

mgkgmc: Your down for belts visors and armrest. One armrest is nice the other appears to be sun burnt as the pics show. They are priced accordingly. The vent on the LH is fine, the RH looks to be slightly warped 7.50 and 4.00. The color is a medium/dark brown. I'm color blind too. I'm sure they are correct for the truck.

If I have missed anybody please let me know. Thanks, Tom

sjarrett71 · 01-04-2011, 09:52 PM

Hey Tom, just posted a few questions about 10 minutes prior to your last post. Don't know if you seen it or not.

superchevy · 01-04-2011, 09:59 PM

Do the upper bed moldings use the factory metal clips? If so, I would like to buy all the upper bed molding clips.
Let me know,
Casey

Davedr · 01-04-2011, 10:09 PM

Payment Sent...Thanks Dave

**tll74** · 01-05-2011, 02:37 AM

sjarrett71: Yes I missed it. It took me a bit to put that post all together (one letter at a time).
the shift linkage is sold.
the fitting and vac line is up for grabs. 3.00 extra for the factory fitting.

superchevy: this truck did not have the upper molding, sorry

Davedr: thank you

burb71 · 01-05-2011, 03:44 AM

I'll take the pair of exhuast brackets at 17.50 shipped
Just PM me

breeh · 01-05-2011, 02:36 PM

Quote:

Originally Posted by tll74

breeh: shipping would be 17.14 how about 85.00 shipped?

Thanks for the offer but no, $75.00 total cost is already a stretch for me on that piece.

sjarrett71 · 01-05-2011, 02:52 PM

Quote:

Originally Posted by tll74

sjarrett71: Yes I missed it. It took me a bit to put that post all together (one letter at a time).
the shift linkage is sold.
the fitting and vac line is up for grabs. 3.00 extra for the factory fitting.

PM me payment total with shipping to Rolla, MO 65401 and how you want paid please. Thanks.

**tll74** · 01-05-2011, 07:40 PM

Quote:

Originally Posted by breeh

Thanks for the offer but no, $75.00 total cost is already a stretch for me on that piece.

Ok..you win! I'll do it for 75.00 shipped. Let me know if your still interested.

breeh · 01-06-2011, 02:25 AM

Quote:

Originally Posted by tll74

Ok..you win! I'll do it for 75.00 shipped. Let me know if your still interested.

I appreciate you meeting my offer. However, I went back and looked through the thread again and noticed that you said that the master cylinder was bad. Also, it appears to be 3/4 booster but maybe that is just the angle of the picture.

**tll74** · 01-06-2011, 02:29 PM

Quote:

Originally Posted by breeh

I appreciate you meeting my offer. However, I went back and looked through the thread again and noticed that you said that the master cylinder was bad. Also, it appears to be 3/4 booster but maybe that is just the angle of the picture.

It is a dual diapham booster. Not sure if this the original type to the truck. The prior owner had mentioned that he replaced it recently so it may be off a 3/4t.

breeh · 01-06-2011, 03:20 PM

Thanks but I am looking for a 1/2 ton style. I already have a 3/4 ton setup.

**tll74** · 01-06-2011, 04:11 PM

Quote:

Originally Posted by sjarrett71

PM me payment total with shipping to Rolla, MO 65401 and how you want paid please. Thanks.

PM sent

sjarrett71 · 01-06-2011, 10:33 PM

Payment sent. Thanks.

bugsy · 01-07-2011, 09:16 PM

would u sell the top bar to the grill?

**tll74** · 01-07-2011, 10:23 PM

Quote:

Originally Posted by bugsy

would u sell the top bar to the grill?

Thanks for asking but, no. I want to keep it together. sorry

butternut1972 · 01-07-2011, 11:25 PM

Tom, Thank again. It was good to meet you today and look over all your old trucks.Kelly

**tll74** · 01-08-2011, 01:02 AM

Quote:

Originally Posted by butternut1972

Tom, Thank again. It was good to meet you today and look over all your old trucks.Kelly

Kelly,
Your welcome and thank you. It was nice to meet you as well. Sorry I didn't have more time to show you around. It was a quite busy. Good luck on your build, it sounds like a very special truck.
Thanks, Tom

bradleyj147 · 01-08-2011, 11:19 AM

What kind of shape is inner cowl panel in?

01-04-2011, 10:23 AM	#101
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 627	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Okay, I'll buy the faceplate too if you can get an answer on the mirror. I'll wait a couple more days for an answer back. -Roger __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71...

01-04-2011, 11:18 AM	#102
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Parting out 1970 GMC C10 350,TH350, 3.73 I will take the wiring harness. Sorry i pm'd you instaed of posting in the thread. Did you end up selling the vent windows? Also you mentioned you will have parts at the Canby swap meet. are you still going to be there?

01-04-2011, 11:25 AM	#103
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting out 1970 GMC C10 350,TH350, 3.73 As promised I'll let butternut have first shot. I'm out on any other parts. Good luck with the rest of your sales. Sharpie

01-04-2011, 08:27 PM	#105
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,355	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Ill take the belts,visors and the armrests . What shape are the armrests and do you still have the heater vents on the top of the dash and what shape are they and color? I didnt mean to take so long on the reply I works nights. thanks

01-04-2011, 09:26 PM	#106
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Are the following parts still available: COMPLETE shifter linkage? Vacuum line from trans to carb? Fitting on intake manifold to attach the vacuum line? I had asked about the slip yoke but I will pass on that. Thanks. __________________ -Scott-

01-04-2011, 09:36 PM	#107
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 bollybib: Paypal would be best PM sent with info. sharpie72: your a good sport, thanks butternut72: the underdash wiring is yours pending payment. roger0080: You are down for the following: rear view mirror speedo face plate Fuel line to carb Oil Pressure line Headlight switch with knob Cigar lighter alternator brackets double groove water pump pulley How much for the SPID itself? free with your purchase skeeterbug: 8.85 via ups Solego: rear cross member 30.00 shipping 16.54 and dip it for FREE. breeh: shipping would be 17.14 how about 85.00 shipped? burb71: 17.50 shipped for a pair. mgkgmc: Your down for belts visors and armrest. One armrest is nice the other appears to be sun burnt as the pics show. They are priced accordingly. The vent on the LH is fine, the RH looks to be slightly warped 7.50 and 4.00. The color is a medium/dark brown. I'm color blind too. I'm sure they are correct for the truck. If I have missed anybody please let me know. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-04-2011, 09:52 PM	#108
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Hey Tom, just posted a few questions about 10 minutes prior to your last post. Don't know if you seen it or not. __________________ -Scott-

01-04-2011, 09:59 PM	#109
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Do the upper bed moldings use the factory metal clips? If so, I would like to buy all the upper bed molding clips. Let me know, Casey __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

01-04-2011, 10:09 PM	#110
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Payment Sent...Thanks Dave

01-05-2011, 02:37 AM	#111
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,529	Re: Parting out 1970 GMC C10 350,TH350, 3.73 sjarrett71: Yes I missed it. It took me a bit to put that post all together (one letter at a time). the shift linkage is sold. the fitting and vac line is up for grabs. 3.00 extra for the factory fitting. superchevy: this truck did not have the upper molding, sorry Davedr: thank you __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-05-2011, 03:44 AM	#112
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting out 1970 GMC C10 350,TH350, 3.73 I'll take the pair of exhuast brackets at 17.50 shipped Just PM me

01-06-2011, 03:20 PM	#118
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Thanks but I am looking for a 1/2 ton style. I already have a 3/4 ton setup. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-06-2011, 10:33 PM	#120
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Payment sent. Thanks. __________________ -Scott-

01-07-2011, 09:16 PM	#121
bugsy Registered User Join Date: Dec 2010 Location: bloomfield mo. Posts: 3	Re: Parting out 1970 GMC C10 350,TH350, 3.73 would u sell the top bar to the grill?

01-07-2011, 11:25 PM	#123
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Parting out 1970 GMC C10 350,TH350, 3.73 Tom, Thank again. It was good to meet you today and look over all your old trucks.Kelly



Register or Log In To remove these advertisements.

01-08-2011, 11:19 AM	#125
bradleyj147 Registered User Join Date: Dec 2010 Location: North Augusta, SC Posts: 7	Re: Parting out 1970 GMC C10 350,TH350, 3.73 What kind of shape is inner cowl panel in?

Register or Log In To remove these advertisements.