intro + 66 black bagged long fleet - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 04-30-2011, 02:02 PM

Nice looking truck keep up the good work..

coda13 · 05-01-2011, 08:06 PM

your truck owns! very nice work.

c10Mang · 05-01-2011, 08:56 PM

Just found this build.. Looks great so far!! Can't wait to see it done

Posted via Mobile Device

coulter · 05-01-2011, 09:52 PM

thanx man!!! ur truck is a beauty!!!

i got a little bit more done
started working on my fenderwells

still gotta make the end caps then finish welding and start smoothing

put the motor in for a test fit.. everything fit great except the drivers side header is just a tad low so im gonna cut it down a lil

mmmm look at this nasty silicone disaster!!!! lol

btw the mounts are just a tubular mount kit i found on ebay.. came with the tranny crossmember to. i bolted them to the forward holes and everything looks like its gonna clear good

FRENCHBLUE72 · 05-01-2011, 11:16 PM

Im thinking you may wanna keep your eye open for a set of finned or at least some nicer valve covers. With those headers and the rest of the work you have done the valve covers just look out of place. Just my.0321 cents worth.

coulter · 05-02-2011, 12:03 AM

ya i bought those just for temporary cause they were cheap... but they got dented up when the motor fell of the engine stand... i just ordered these

coulter · 05-02-2011, 11:10 AM

was pretty lazy yesterday so i didnt get much done
pulled the heads off to check it out..

i took a better pic of the mounts

it was too late last night to start cutting and grinding but i did go ahead and get my lines drawn for where im gonna cut my rear tubs

this crappy rainy weather makes it hard to get motivated to work

chad64chevy · 05-02-2011, 09:53 PM

ya, i know what you mine about the weather, i'm a lil south of you!! nice work so far!! i got some rear wheelwells you can have to make those front wheelwells!!

FRENCHBLUE72 · 05-02-2011, 10:01 PM

Those finned covers are gonna look *****en..

DRTYRAT30 · 05-02-2011, 10:46 PM

I havent checked in on your build in a while. Your a wild man, its looking bad a$$ bro. you have a great vision and the skills to make it happen. Oh and i love those XS's also...

Jesse

coulter · 05-03-2011, 08:05 AM

Quote:

Originally Posted by FRENCHBLUE72

Those finned covers are gonna look *****en..

ya i should have just bought those in the first place instead of being a cheap ass...lol pretty sure im gonna get the matching air cleaner to

Quote:

Originally Posted by DRTYRAT30

I havent checked in on your build in a while. Your a wild man, its looking bad a$$ bro. you have a great vision and the skills to make it happen. Oh and i love those XS's also...

Jesse

thanx man

ur truck has been pretty inspirational in this build

along with alot of other badass rides on here!!!
im really glad i found this site!!! its been a big help

coulter · 05-05-2011, 03:23 AM

got some new goodies

lokar 23 inch double bend
shiney alt bracket
cpp sway bar kit
finned vc's from the bay
universal 26x19 aluminum rad

getting an idea for mounting

SulphuriousSam · 05-05-2011, 02:42 PM

Just wanted to say I've been watching your build and it's coming together into one sick ride. I hope you take it to a show nearby so I can see it up close when you're done!

coulter · 05-05-2011, 03:00 PM

o ya u know it!!! im im shooting to have it driveable by the end of july (hopefully) im gonna try to make it to as many as i can that arent too far away... dont wanna take a super long trip in it till i make sure i got all the bugs worked out

Sick5 · 05-05-2011, 03:55 PM

Quote:

Originally Posted by coulter

got some new goodies

lokar 23 inch double bend
shiney alt bracket
cpp sway bar kit
finned vc's from the bay
universal 26x19 aluminum rad

getting an idea for mounting

Were dis you.get the rad from
Posted via Mobile Device

FRENCHBLUE72 · 05-05-2011, 06:46 PM

Nice new shiny parts...

coulter · 05-05-2011, 08:10 PM

here u go sick5 http://stores.ebay.com/KMJ-PERFORMAN...=p4634.c0.m322

redneck6 · 05-05-2011, 11:42 PM

bad ass truck man , looks sick as all hell , got a ? for you and the masses , if you sectioned ur cross member and or a small z of the frame would it lay rocker in the from ??

coulter · 05-05-2011, 11:53 PM

ya my frame is about 2 inches off the ground with 2.5 drop spindles and sitting on lower control arms.. so it wouldnt take a huge z with drop spindles.. i think most people do a 3 inch z..

creep · 05-06-2011, 11:12 AM

Quote:

Originally Posted by redneck6

bad ass truck man , looks sick as all hell , got a ? for you and the masses , if you sectioned ur cross member and or a small z of the frame would it lay rocker in the from ??

With the frame flat on the ground the pinchwelds on mine are about 1/8"-1/4" from the ground. That is with brand new urethane body mount bushings, older broken in rubber bushings may get you closer if not touching.

coulter · 05-08-2011, 05:02 AM

got the rear tubs trimmed down today

Alan's Classic · 05-09-2011, 12:29 AM

Awesome work!! I'm really diggin' it!!

Slammed66 · 05-09-2011, 01:37 AM

Sick dude, looks awsome!!!
Posted via Mobile Device

66redw/white · 05-09-2011, 11:05 AM

nice truck man! i need to bag mine bad. you do some sweet work.

low 90 · 05-10-2011, 12:07 PM

nice truck for sure! if you dont mind me asking where did you get the motor mounts from?

04-30-2011, 02:02 PM	#101
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: intro + 66 black bagged long fleet Nice looking truck keep up the good work.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-01-2011, 08:06 PM	#102
coda13 Registered User Join Date: Mar 2011 Location: las vegas nv Posts: 13	Re: intro + 66 black bagged long fleet your truck owns! very nice work.

05-01-2011, 08:56 PM	#103
c10Mang Registered User Join Date: May 2008 Location: Venice, Ca Posts: 322	Re: intro + 66 black bagged long fleet Just found this build.. Looks great so far!! Can't wait to see it done Posted via Mobile Device

05-01-2011, 09:52 PM	#104
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: intro + 66 black bagged long fleet thanx man!!! ur truck is a beauty!!! i got a little bit more done started working on my fenderwells still gotta make the end caps then finish welding and start smoothing put the motor in for a test fit.. everything fit great except the drivers side header is just a tad low so im gonna cut it down a lil mmmm look at this nasty silicone disaster!!!! lol btw the mounts are just a tubular mount kit i found on ebay.. came with the tranny crossmember to. i bolted them to the forward holes and everything looks like its gonna clear good __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918 Last edited by coulter; 05-01-2011 at 09:56 PM.

05-01-2011, 11:16 PM	#105
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: intro + 66 black bagged long fleet Im thinking you may wanna keep your eye open for a set of finned or at least some nicer valve covers. With those headers and the rest of the work you have done the valve covers just look out of place. Just my.0321 cents worth. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-02-2011, 12:03 AM	#106
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: intro + 66 black bagged long fleet ya i bought those just for temporary cause they were cheap... but they got dented up when the motor fell of the engine stand... i just ordered these __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

05-02-2011, 11:10 AM	#107
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: intro + 66 black bagged long fleet was pretty lazy yesterday so i didnt get much done pulled the heads off to check it out.. i took a better pic of the mounts it was too late last night to start cutting and grinding but i did go ahead and get my lines drawn for where im gonna cut my rear tubs this crappy rainy weather makes it hard to get motivated to work __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

05-02-2011, 09:53 PM	#108
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: intro + 66 black bagged long fleet ya, i know what you mine about the weather, i'm a lil south of you!! nice work so far!! i got some rear wheelwells you can have to make those front wheelwells!!

05-02-2011, 10:01 PM	#109
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: intro + 66 black bagged long fleet Those finned covers are gonna look *****en.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-02-2011, 10:46 PM	#110
DRTYRAT30 Jesse Join Date: Sep 2006 Location: Lodi,CA Posts: 601	Re: intro + 66 black bagged long fleet I havent checked in on your build in a while. Your a wild man, its looking bad a$$ bro. you have a great vision and the skills to make it happen. Oh and i love those XS's also... Jesse

05-05-2011, 03:23 AM	#112
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: intro + 66 black bagged long fleet got some new goodies lokar 23 inch double bend shiney alt bracket cpp sway bar kit finned vc's from the bay universal 26x19 aluminum rad getting an idea for mounting __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918 Last edited by coulter; 05-05-2011 at 03:36 AM.

05-05-2011, 02:42 PM	#113
SulphuriousSam Registered User Join Date: Apr 2011 Location: Sulphur, OK Posts: 316	Re: intro + 66 black bagged long fleet Just wanted to say I've been watching your build and it's coming together into one sick ride. I hope you take it to a show nearby so I can see it up close when you're done! __________________ 1966 C10 LWB, 283, 3 on the tree (lots of work to do!) http://67-72chevytrucks.com/vboard/s...d.php?t=471348 2001 Suburban daily driver 2008 HHR (wife's ride)

05-05-2011, 03:00 PM	#114
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: intro + 66 black bagged long fleet o ya u know it!!! im im shooting to have it driveable by the end of july (hopefully) im gonna try to make it to as many as i can that arent too far away... dont wanna take a super long trip in it till i make sure i got all the bugs worked out __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

05-05-2011, 06:46 PM	#116
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: intro + 66 black bagged long fleet Nice new shiny parts... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-05-2011, 08:10 PM	#117
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: intro + 66 black bagged long fleet here u go sick5 http://stores.ebay.com/KMJ-PERFORMAN...=p4634.c0.m322 __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918



Register or Log In To remove these advertisements.

05-05-2011, 11:42 PM	#118
redneck6 Registered User Join Date: Jul 2009 Location: sparks nv Posts: 142	Re: intro + 66 black bagged long fleet bad ass truck man , looks sick as all hell , got a ? for you and the masses , if you sectioned ur cross member and or a small z of the frame would it lay rocker in the from ?? __________________ 64 chevy c10 swb fleet small back window , in progress 454/400 swap , disc front disc rear , and just geting it on the road . 09 ford f350 cc swb 4x4 6.4l , to haul the others home . 2011 chevy hhr not mine but love the milage ..

05-05-2011, 11:53 PM	#119
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: intro + 66 black bagged long fleet ya my frame is about 2 inches off the ground with 2.5 drop spindles and sitting on lower control arms.. so it wouldnt take a huge z with drop spindles.. i think most people do a 3 inch z.. __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

05-08-2011, 05:02 AM	#121
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: intro + 66 black bagged long fleet got the rear tubs trimmed down today __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

05-09-2011, 12:29 AM	#122
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: intro + 66 black bagged long fleet Awesome work!! I'm really diggin' it!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

05-09-2011, 01:37 AM	#123
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: intro + 66 black bagged long fleet Sick dude, looks awsome!!! Posted via Mobile Device __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

05-09-2011, 11:05 AM	#124
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: intro + 66 black bagged long fleet nice truck man! i need to bag mine bad. you do some sweet work. __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

05-10-2011, 12:07 PM	#125
low 90 Registered User Join Date: Feb 2011 Location: benbrook tx Posts: 22	Re: intro + 66 black bagged long fleet nice truck for sure! if you dont mind me asking where did you get the motor mounts from?

Register or Log In To remove these advertisements.