NY Mis 69 c10 parts - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

2002yanks · 06-25-2011, 07:26 PM

Quote:

Originally Posted by 1972hays

Does the jack work
Posted via Mobile Device

works as in will go up/down. just never tried to jack up the truck with it.

2002yanks · 06-26-2011, 02:23 PM

dropping some prices again. just triing to move this stuff.

willing to trade items for a rear roll pan or front inner fenders.

prices are obo

1. set of front fenders near mint(believe they are aftermarket as the insides are so clean). only 1 small blemish on passenger side(will show in pic). $225 (will sell individual $125 each)
4. set of 4 springs(front and rear) $45
5. jack, handle and lug wrench sold pending payment
7. 2 seat belt sets- no retractors , has gm on it . $15
8. mis motor parts from 305
-2 barrell carb $15
-air filter housing $10
9. accel hei super coil 140003 wityh cap and plug wires $30
10 set of trim rings 15" decent driver shape $15
11. bench seat with frame. has 1 rip in it on drivers side next to the black piece you see(sorry for the bad pic opn this, but i have no room for anything) $60
12. set of 4 steel 15" 6 bolt rims $45
13. spindles $15
14. gage bezel $10
-mis v belt pulleys- make offer'
-mis serpentine belt pulleys and idler pulley make offer
-mis bracket center of board make offer
-painted front and back bumper off my 67 gmc for sale. $60 obo each.

2002yanks · 06-27-2011, 11:23 AM

grille has been sold

2002yanks · 06-27-2011, 03:04 PM

jack sold pending payment to 1972hays

2002yanks · 06-29-2011, 10:54 AM

ttt

camrycurt · 06-29-2011, 10:58 AM

Do you still happen to have the manual steering box for sale? I saw it early on in your post but didn't see anything else about whether it sold or not.

If you have it, I'd be interested in seeing if we could work a deal on the steering box, steering wheel, and C/10 emblems shipped to 20176.

Thanks!

2002yanks · 06-29-2011, 05:34 PM

the manual box was tossed in the scrapyard-didnt think there was any interest in it(and i was sick of tripping over it).i will have another one, but it would be awhile. i bought power steering setup for mine, but dont plan on installing it anytime soon. if interested in the wheel and emblems i could do $40 shipped for them.

camrycurt · 06-30-2011, 07:38 AM

Quote:

Originally Posted by 2002yanks

if interested in the wheel and emblems i could do $40 shipped for them.

Could you meet me in the middle on the shipping and do $35 shipped to 20176 for both the steering wheel and emblems?

2002yanks · 06-30-2011, 08:40 AM

Quote:

Originally Posted by camrycurt

Could you meet me in the middle on the shipping and do $35 shipped to 20176 for both the steering wheel and emblems?

35 is fine. can do paypal or money order. paypal is kmalone02@verizon.net please send as a gift so i dont get hit with the fees. if m.o i will pm address.

camrycurt · 06-30-2011, 10:18 AM

Quote:

Originally Posted by 2002yanks

35 is fine. can do paypal or money order. paypal is kmalone02@verizon.net please send as a gift so i dont get hit with the fees. if m.o i will pm address.

OK, $35 in birthday money is on its way via Paypal. Let me know if you don't receive it or if there are any problems.

Thanks!

2002yanks · 06-30-2011, 10:30 AM

got it. will go out today. wheel and emblems sold!!

updated list
willing to trade items for a rear roll pan or front inner fenders.

prices are obo

1. set of front fenders near mint(believe they are aftermarket as the insides are so clean). only 1 small blemish on passenger side(will show in pic). $225 (will sell individual $125 each)
4. set of 4 springs(front and rear) $45
5. jack, handle and lug wrench sold pending payment
7. 2 seat belt sets- no retractors , has gm on it . $15
8. mis motor parts from 305
-2 barrell carb $15
-air filter housing $10
9. accel hei super coil 140003 wityh cap and plug wires $30
10 set of trim rings 15" decent driver shape $15
11. bench seat with frame. has 1 rip in it on drivers side next to the black piece you see(sorry for the bad pic opn this, but i have no room for anything) $60
12. set of 4 steel 15" 6 bolt rims $45
13. spindles $15
14. gage bezel $10
-mis v belt pulleys- make offer'
-mis serpentine belt pulleys and idler pulley make offer
-mis bracket center of board make offer
-painted front and back bumper off my 67 gmc for sale. $60 obo each.

2002yanks · 06-30-2011, 04:45 PM

Quote:

Originally Posted by camrycurt

OK, $35 in birthday money is on its way via Paypal. Let me know if you don't receive it or if there are any problems.

Thanks!

went out today via priority mail. should be there saturday. thanks again.

CrewCab59 · 07-01-2011, 09:05 AM

Steering wheel ,seatbelts still for sale ? if si I will take them 37721.

Thanks

2002yanks · 07-01-2011, 10:16 AM

steering wheel has been sold. could do $20 shipped on the seat belts.

2002yanks · 07-01-2011, 10:17 PM

updated list- sold rims -gave away pulleys,carb, air filter housing and rim trim rings.

willing to trade items for a rear roll pan or front inner fenders.
prices are obo

1. set of front fenders near mint(believe they are aftermarket as the insides are so clean). only 1 small blemish on passenger side(will show in pic). $225 (will sell individual $125 each)
4. set of 4 springs(front and rear) $45
5. jack, handle and lug wrench sold pending payment
7. 2 seat belt sets- no retractors , has gm on it . $15
9. accel hei super coil 140003 with cap and plug wires $30
11. bench seat with frame. has 1 rip in it on drivers side next to the black piece you see(sorry for the bad pic opn this, but i have no room for anything) $60
13. spindles $15
14. gage bezel $10
-painted front and back bumper off my 67 gmc for sale. $60 obo each.

dozerman · 07-02-2011, 03:26 PM

Still have grill shell I would possibly be in line upon pics.

2002yanks · 07-02-2011, 05:36 PM

Quote:

Originally Posted by dozerman

Still have grill shell I would possibly be in line upon pics.

thats been sold. sorry

2002yanks · 07-02-2011, 08:23 PM

updated list- sold the fenders

willing to trade items for a rear roll pan or front inner fenders.
prices are obo

4. set of 4 springs(front and rear) $45
5. jack, handle and lug wrench sold pending payment
7. 2 seat belt sets- no retractors , has gm on it . $15
9. accel hei super coil 140003 with cap and plug wires $30
11. bench seat with frame. has 1 rip in it on drivers side next to the black piece you see(sorry for the bad pic opn this, but i have no room for anything) $60
13. spindles $15
14. gage bezel $10
-painted front and back bumper off my 67 gmc for sale. $60 obo each.

camrycurt · 07-03-2011, 07:32 AM

Got the steering wheel and emblems - everything looks great! Thanks for the quick shipping and good parts.

2002yanks · 07-03-2011, 09:47 AM

Quote:

Originally Posted by camrycurt

Got the steering wheel and emblems - everything looks great! Thanks for the quick shipping and good parts.

your welcome. glad you like them. thanks again

delete this thread please. starting a new one.

06-26-2011, 02:23 PM	#102
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts dropping some prices again. just triing to move this stuff. willing to trade items for a rear roll pan or front inner fenders. prices are obo 1. set of front fenders near mint(believe they are aftermarket as the insides are so clean). only 1 small blemish on passenger side(will show in pic). $225 (will sell individual $125 each) 4. set of 4 springs(front and rear) $45 5. jack, handle and lug wrench sold pending payment 7. 2 seat belt sets- no retractors , has gm on it . $15 8. mis motor parts from 305 -2 barrell carb $15 -air filter housing $10 9. accel hei super coil 140003 wityh cap and plug wires $30 10 set of trim rings 15" decent driver shape $15 11. bench seat with frame. has 1 rip in it on drivers side next to the black piece you see(sorry for the bad pic opn this, but i have no room for anything) $60 12. set of 4 steel 15" 6 bolt rims $45 13. spindles $15 14. gage bezel $10 -mis v belt pulleys- make offer' -mis serpentine belt pulleys and idler pulley make offer -mis bracket center of board make offer -painted front and back bumper off my 67 gmc for sale. $60 obo each. Last edited by 2002yanks; 06-30-2011 at 10:30 AM.

06-27-2011, 11:23 AM	#103
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts grille has been sold

06-27-2011, 03:04 PM	#104
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts jack sold pending payment to 1972hays

06-29-2011, 10:54 AM	#105
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts ttt

06-29-2011, 10:58 AM	#106
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: Mis 69 c10 parts Do you still happen to have the manual steering box for sale? I saw it early on in your post but didn't see anything else about whether it sold or not. If you have it, I'd be interested in seeing if we could work a deal on the steering box, steering wheel, and C/10 emblems shipped to 20176. Thanks! __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear

06-29-2011, 05:34 PM	#107
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts the manual box was tossed in the scrapyard-didnt think there was any interest in it(and i was sick of tripping over it).i will have another one, but it would be awhile. i bought power steering setup for mine, but dont plan on installing it anytime soon. if interested in the wheel and emblems i could do $40 shipped for them.

06-30-2011, 10:30 AM	#111
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts got it. will go out today. wheel and emblems sold!! updated list willing to trade items for a rear roll pan or front inner fenders. prices are obo 1. set of front fenders near mint(believe they are aftermarket as the insides are so clean). only 1 small blemish on passenger side(will show in pic). $225 (will sell individual $125 each) 4. set of 4 springs(front and rear) $45 5. jack, handle and lug wrench sold pending payment 7. 2 seat belt sets- no retractors , has gm on it . $15 8. mis motor parts from 305 -2 barrell carb $15 -air filter housing $10 9. accel hei super coil 140003 wityh cap and plug wires $30 10 set of trim rings 15" decent driver shape $15 11. bench seat with frame. has 1 rip in it on drivers side next to the black piece you see(sorry for the bad pic opn this, but i have no room for anything) $60 12. set of 4 steel 15" 6 bolt rims $45 13. spindles $15 14. gage bezel $10 -mis v belt pulleys- make offer' -mis serpentine belt pulleys and idler pulley make offer -mis bracket center of board make offer -painted front and back bumper off my 67 gmc for sale. $60 obo each. Last edited by 2002yanks; 06-30-2011 at 10:31 AM.

07-01-2011, 09:05 AM	#113
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: Mis 69 c10 parts Steering wheel ,seatbelts still for sale ? if si I will take them 37721. Thanks __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

07-01-2011, 10:16 AM	#114
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts steering wheel has been sold. could do $20 shipped on the seat belts.

07-01-2011, 10:17 PM	#115
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts updated list- sold rims -gave away pulleys,carb, air filter housing and rim trim rings. willing to trade items for a rear roll pan or front inner fenders. prices are obo 1. set of front fenders near mint(believe they are aftermarket as the insides are so clean). only 1 small blemish on passenger side(will show in pic). $225 (will sell individual $125 each) 4. set of 4 springs(front and rear) $45 5. jack, handle and lug wrench sold pending payment 7. 2 seat belt sets- no retractors , has gm on it . $15 9. accel hei super coil 140003 with cap and plug wires $30 11. bench seat with frame. has 1 rip in it on drivers side next to the black piece you see(sorry for the bad pic opn this, but i have no room for anything) $60 13. spindles $15 14. gage bezel $10 -painted front and back bumper off my 67 gmc for sale. $60 obo each.

07-02-2011, 03:26 PM	#116
dozerman Registered User Join Date: Dec 2010 Location: Groveland ca Posts: 224	Re: Mis 69 c10 parts Still have grill shell I would possibly be in line upon pics.

07-02-2011, 08:23 PM	#118
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Mis 69 c10 parts updated list- sold the fenders willing to trade items for a rear roll pan or front inner fenders. prices are obo 4. set of 4 springs(front and rear) $45 5. jack, handle and lug wrench sold pending payment 7. 2 seat belt sets- no retractors , has gm on it . $15 9. accel hei super coil 140003 with cap and plug wires $30 11. bench seat with frame. has 1 rip in it on drivers side next to the black piece you see(sorry for the bad pic opn this, but i have no room for anything) $60 13. spindles $15 14. gage bezel $10 -painted front and back bumper off my 67 gmc for sale. $60 obo each.

07-03-2011, 07:32 AM	#119
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: Mis 69 c10 parts Got the steering wheel and emblems - everything looks great! Thanks for the quick shipping and good parts. __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.