my first c10 custom - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jwalk · 06-12-2011, 01:57 AM

Very cool project! A boosted LS motor would be pretty sick in there...

Posted via Mobile Device
Posted via Mobile Device

Dinos63 · 06-13-2011, 06:32 PM

Quote:

Originally Posted by jwalk

Very cool project! A boosted LS motor would be pretty sick in there...

Posted via Mobile Device
Posted via Mobile Device

yeah that would be sic!!

creep · 06-13-2011, 08:23 PM

Quote:

Originally Posted by Dinos63

jessie i know i am going with a 383 small block but i am not sure if it will be blown or turbo maybe even sparyed, am lookin for around 400 hp turbo 400 trans ,i plan on really lighten up the truck as much as i can too then i am going to get everything finished and then pull the trigger on the motor. jessie those are some killer pics of the moon eyes shop too brotha

Just 400 hp? C,mon you can do better than that! My 383 is 400 without any adders.

thirdstreettito · 06-13-2011, 08:34 PM

Go grab a 5.3 LS engine off ebya for $600 with less than 100K miles and buy a single STS universal rear mount turbo system($2000). You will then have a super bada$$ and unique truck with at least 400hp.

pmkrew · 06-13-2011, 09:24 PM

Hot rod Magazine an issue or so ago did a 5.3 turbo "low buck" set up made over 500 hp, pretty neat deal...

**N2TRUX** · 06-13-2011, 10:48 PM

Quote:

Originally Posted by lolife99

How about 22x8.5's and 24x15's layin flat?
A set of 405/25-24's would look killer under those rear bedsides!!!

Noble effort Keith. Unfortunately your contemporary vision went unheeded.

**lolife99** · 06-13-2011, 10:59 PM

Quote:

Originally Posted by N2TRUX

Noble effort Keith. Unfortunately your contemporary vision went unheeded.

I tried. Ha.

I still have my old '67 Pro Street Camaro in the garage.
(I wish now I'd never cut it up).
I'm waiting for "Pro Street" to make a come back!

Maybe Dinos truck will start the revolution.

jmedero · 06-13-2011, 11:50 PM

You know dino is a trend setter.
Posted via Mobile Device

wutnxt · 06-14-2011, 12:02 AM

Dude....
I wish I could find trucks like that up here in the north.....anyhow I vote old school 454- 700 HP trans break set up....4 link...and then a shock/bag combo like a shockwave set up. I think i have truck envy again lol...

Dinos63 · 06-14-2011, 12:16 AM

Quote:

Originally Posted by lolife99

I tried. Ha.

I still have my old '67 Pro Street Camaro in the garage.
(I wish now I'd never cut it up).
I'm waiting for "Pro Street" to make a come back!

Maybe Dinos truck will start the revolution.

Dinos63 · 06-14-2011, 12:16 AM

Quote:

Originally Posted by N2TRUX

Noble effort Keith. Unfortunately your contemporary vision went unheeded.

they would be cool

Scottshotrods · 06-14-2011, 12:20 AM

got it put some 30 inch wheels on it and you can be the first pro street dunk truck.
lol

Justin

the wheels you got look very cool

Dinos63 · 06-14-2011, 12:23 AM

Quote:

Originally Posted by Scottshotrods

got it put some 30 inch wheels on it and you can be the first pro street dunk truck.
lol

Justin

the wheels you got look very cool

thanks kat!

franky69c10 · 06-14-2011, 09:07 PM

Damn dino can't wait 4 this build 2 start it's gonna b sick

Posted via Mobile Device

Dinos63 · 06-15-2011, 12:49 AM

thanks franky just waiting on parts

Delmo · 06-15-2011, 01:35 AM

OOOOOhhhhhhh ya.

jmedero · 06-15-2011, 01:42 AM

I'd say drive it like that.
Posted via Mobile Device

wutnxt · 06-15-2011, 10:42 AM

Dino

Crap dude ...your catching up fast ....
I am so going to have to get back in the game and my truck done....

chevyrestoguy · 06-15-2011, 11:07 AM

Quote:

Originally Posted by lolife99

I tried. Ha.

I still have my old '67 Pro Street Camaro in the garage.
(I wish now I'd never cut it up).
I'm waiting for "Pro Street" to make a come back!

Maybe Dinos truck will start the revolution.

My opinion:
Pro Street has never gone out of style. Don't let the magazines tell you "what's in and what's out". They are being spoon-fed by the parts manufacturers who are pimping out their parts merely for the advertising space in the magazines. As long as drag cars still have narrowed rear ends, Pro Street will never go out of style.

I like all styles, from stockers to lowriders to 4X4s, but I really like Pro Street. It makes any car or truck look MEAN. So pull that Camaro out of it's slumber and get it back on the road!!! Even if some of the parts are outdated, it's still waaay cooler than 99% of the other stuff out there. Plus, it's a first-gen Camaro, and it doesn't get much cooler than that.

wutnxt · 06-15-2011, 11:15 AM

chevyrestoguy

My opinion:
Pro Street has never gone out of style. Don't let the magazines tell you "what's in and what's out". They are being spoon-fed by the parts manufacturers who are pimping out their parts merely for the advertising space in the magazines. As long as drag cars still have narrowed rear ends, Pro Street will never go out of style.

I like all styles, from stockers to lowriders to 4X4s, but I really like Pro Street. It makes any car or truck look MEAN. So pull that Camaro out of it's slumber and get it back on the road!!! Even if some of the parts are outdated, it's still waaay cooler than 99% of the other stuff out there. Plus, it's a first-gen Camaro, and it doesn't get much cooler than that.
------------------------------------------------------------------------------------
Okay....that post was some serious stuff....bows...that was awsome...Seconds that opinion

**Captainfab** · 06-15-2011, 11:49 PM

I agree wholehartedly.

I have never been one to go along what is mainstream. I like what I like and if it doesn't happen to be what is 'In', so what.

Quote:

Originally Posted by chevyrestoguy

My opinion:
Pro Street has never gone out of style. Don't let the magazines tell you "what's in and what's out". They are being spoon-fed by the parts manufacturers who are pimping out their parts merely for the advertising space in the magazines. As long as drag cars still have narrowed rear ends, Pro Street will never go out of style.

I like all styles, from stockers to lowriders to 4X4s, but I really like Pro Street. It makes any car or truck look MEAN. So pull that Camaro out of it's slumber and get it back on the road!!! Even if some of the parts are outdated, it's still waaay cooler than 99% of the other stuff out there. Plus, it's a first-gen Camaro, and it doesn't get much cooler than that.

Dinos63 · 06-16-2011, 02:55 PM

AFTER THIS BUILD I AM DOING A PHANTOM DUALIE

JUST KIDDING I LOVE PROSTREET CARS AND TRUCKS AND ALWAYS HAVE I CAN WAIT !!! I HOPING FOR GOOD GUYS IN NOVEMBER TO BE READY AND PLANNING ON DOING ANOTHER BIG C10 PARTY

61_FL_Apache · 06-16-2011, 03:24 PM

Quote:

Originally Posted by jonzcustomshop

love that farm truck, here is a better shot of it hooking up:
http://youtu.be/F5oftRgd9VY

That thing will hook and book!!!

chad64chevy · 06-20-2011, 03:38 PM

dino, you get that back part of the frame attached to the rest of the frame yet?? what about so updates??

Dinos63 · 06-20-2011, 06:34 PM

Quote:

Originally Posted by chad64chevy

dino, you get that back part of the frame attached to the rest of the frame yet?? What about so updates??

waiting on parts check with nate front end complete mid week, and willie will have the rear done this week also, but waiting for the rear axle i had built should be around the 28th , i want to have it all done chassi done by the end of the month, i will post up some pics soon

06-12-2011, 01:57 AM	#101
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: my first c10 custom Very cool project! A boosted LS motor would be pretty sick in there... Posted via Mobile Device Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

06-13-2011, 08:34 PM	#104
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: my first c10 custom Go grab a 5.3 LS engine off ebya for $600 with less than 100K miles and buy a single STS universal rear mount turbo system($2000). You will then have a super bada$$ and unique truck with at least 400hp. __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

06-13-2011, 09:24 PM	#105
pmkrew Registered User Join Date: Sep 2009 Location: Marietta, Ga Posts: 115	Re: my first c10 custom Hot rod Magazine an issue or so ago did a 5.3 turbo "low buck" set up made over 500 hp, pretty neat deal...

06-13-2011, 11:50 PM	#108
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: my first c10 custom You know dino is a trend setter. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

06-14-2011, 12:02 AM	#109
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: my first c10 custom Dude.... I wish I could find trucks like that up here in the north.....anyhow I vote old school 454- 700 HP trans break set up....4 link...and then a shock/bag combo like a shockwave set up. I think i have truck envy again lol... __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-14-2011, 12:20 AM	#112
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: my first c10 custom got it put some 30 inch wheels on it and you can be the first pro street dunk truck. lol Justin the wheels you got look very cool

06-14-2011, 09:07 PM	#114
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: my first c10 custom Damn dino can't wait 4 this build 2 start it's gonna b sick Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

06-15-2011, 12:49 AM	#115
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: my first c10 custom thanks franky just waiting on parts Attached Images __________________ CHEVY ONLY... Nothin Else !

06-15-2011, 01:35 AM	#116
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: my first c10 custom OOOOOhhhhhhh ya.

06-15-2011, 01:42 AM	#117
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: my first c10 custom I'd say drive it like that. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

06-15-2011, 10:42 AM	#118
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: my first c10 custom Dino Crap dude ...your catching up fast .... I am so going to have to get back in the game and my truck done.... __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-15-2011, 11:15 AM	#120
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: my first c10 custom chevyrestoguy My opinion: Pro Street has never gone out of style. Don't let the magazines tell you "what's in and what's out". They are being spoon-fed by the parts manufacturers who are pimping out their parts merely for the advertising space in the magazines. As long as drag cars still have narrowed rear ends, Pro Street will never go out of style. I like all styles, from stockers to lowriders to 4X4s, but I really like Pro Street. It makes any car or truck look MEAN. So pull that Camaro out of it's slumber and get it back on the road!!! Even if some of the parts are outdated, it's still waaay cooler than 99% of the other stuff out there. Plus, it's a first-gen Camaro, and it doesn't get much cooler than that. ------------------------------------------------------------------------------------ Okay....that post was some serious stuff....bows...that was awsome...Seconds that opinion __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

06-16-2011, 02:55 PM	#122
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: my first c10 custom AFTER THIS BUILD I AM DOING A PHANTOM DUALIE JUST KIDDING I LOVE PROSTREET CARS AND TRUCKS AND ALWAYS HAVE I CAN WAIT !!! I HOPING FOR GOOD GUYS IN NOVEMBER TO BE READY AND PLANNING ON DOING ANOTHER BIG C10 PARTY __________________ CHEVY ONLY... Nothin Else !

06-20-2011, 03:38 PM	#124
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: my first c10 custom dino, you get that back part of the frame attached to the rest of the frame yet?? what about so updates??



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.