how about some pics of inline 6 engines - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hammersmith · 08-26-2015, 05:56 PM

Quote:

Originally Posted by Sixteen Tons

@hammersmith
That fresh air draw from the exhaust manifold to air cleaner is something I've never seen before. Is this modified (doesn't look like it) or a different exhaust manifold altogether??

This stove pipe is not the original one from my truck but it did have one very similar back in the day. I got this one from a 69 camaro and the air cleaner. The horn of the air cleaner has a larger opening and sits more at 5 o'clock we're my original sat at 4 o'clock.

rdhowe2006@yahoo.com · 06-29-2016, 11:25 PM

Anyone know where I can get an air filter assembly for my IL 6 Cylinder?

**Grumpy old man** · 06-30-2016, 07:30 AM

Quote:

Originally Posted by rdhowe2006@yahoo.com

Anyone know where I can get an air filter assembly for my IL 6 Cylinder?

Watch the parts section , I found one for $10.00 + shipping . Media blasted it and after a few coats of high build primer it looks brand new .

VWNate1 · 07-01-2016, 01:50 AM

Quote:

Originally Posted by rdhowe2006@yahoo.com

Anyone know where I can get an air filter assembly for my IL 6 Cylinder?

It depends on which one you want ~ the big off set truck one is out there but hard to find as no one wants them so they gets tossed aside or damaged

The flat typ as used on Chevy II's , Camaros , Malibus and full size sedans , are also out there and often cheap .

I have a few but they're a bit rusty , once I get access to a bead blaster I'll clean and strip them then sell off .

Same air cleaners interchange between 194 , 230 , 250 and 292 CID engines with the later Rochester carby (?) BC series IIRC .

rdhowe2006@yahoo.com · 07-04-2016, 04:22 PM

Hey do you know where I can get an Air Filter Assembly like yours. I have been looking for one like 6 months. I cant even drive my 1970 c10 IL 6 250 because I have no air filter assembly. Any help would be appreciated.

**old51sedan** · 10-02-2017, 09:38 AM

Quote:

Originally Posted by '68OrangeSunshine

As far as I know, "there ain't no such animule" as a fan shroud for the L6 engines. They all had "Finger Guards" which is a piece of bent sheet metal that bolts onto the radiator support and extends down about 6" over the fan to keep all but the most dedicated idiot from losing his fingers.
This is not to say a fibreglas/plastic fan shroud from an SBC set up wouldn't fit in that spot.
As far as the clutch fan idea, it might work out OK. I've been using a FlexFan on my 292 since 1977 and have not had a problem yet. [And I live in Ariz.]

I have a 69 C-10 that I bought in CA with the 250/ 3 speed auto. It has a fan shroud and a 3 core radiator, looks original to me, no heating problems. I removed the smog control and installed PS. I'm currently rebuilding a 292 for it and I need thermostat housing for it. I need one where the top rad hose points towards the drivers fender, not straight up. Would you by any chance have one? Thanks, Donn

**'68OrangeSunshine** · 10-02-2017, 02:58 PM

Quote:

Originally Posted by old51sedan

I have a 69 C-10 that I bought in CA with the 250/ 3 speed auto. It has a fan shroud and a 3 core radiator, looks original to me, no heating problems. I removed the smog control and installed PS. I'm currently rebuilding a 292 for it and I need thermostat housing for it. I need one where the top rad hose points towards the drivers fender, not straight up. Would you by any chance have one? Thanks, Donn

Did you mean one of these?

**special-K** · 10-02-2017, 06:40 PM

Not in a truck but wouldn't that be cool?

**'68OrangeSunshine** · 10-02-2017, 07:36 PM

What is it? Looks like maybe a Vortec 4.2, but the early '60s oil filler tube/breather cap throws me. Also looks like a Pontiac Catalina/GTO nose, w/ Sprint badge. So is it an El Cabrito? [Sp. for '' little goat''] Some might contend that it is a truck, then.
Can't read the numerals on the fender badge.

**old51sedan** · 10-02-2017, 07:43 PM

Quote:

Originally Posted by '68OrangeSunshine

Did you mean one of these?

Yes, something like that. Is there a place there for the temp sending unit? Does it take the larger hose, meaning bigger around?

bill3rail · 10-02-2017, 08:32 PM

Since I was not the one to dig up this thread, I'll add to it.

Air cleaner has been replaced and looks much better now.

**'68OrangeSunshine** · 10-02-2017, 11:47 PM

Quote:

Originally Posted by old51sedan

Yes, something like that. Is there a place there for the temp sending unit? Does it take the larger hose, meaning bigger around?

Well, yes and no. The stock Chevy Thermostat Housing is made from cast aluminum. Stock OEM form, it has no hole for a temp probe. My original piece broke, once when I overtightened it. I went to Pep Boys and showed them the broken part. They didn't have anything like that for a [then] 25 year old Chevy L6. But, the parts guy started looking around amongst other makes and found a Thermostat Housing from [I think] a Toyota Landcruiser that had the big ''I-6'' 2F 4.2 Liter. (It was a clone of the old Chevy 261 L6 -- a Korean War logistics expedient, that stayed).
The Toyota housing is made of cast iron, fits the same, and does have a port for a temperature probe.
Hoses fit, no issues.
Moral of the story: Chevys have L6s, Ford and Toyota call it an I-6.

IRQVET · 10-03-2017, 12:39 AM

250ci Inline 6 out of a 68 C-20 Flat Bed . . . Correction, it's a 292ci. (Thanks VWNate1)

**special-K** · 10-03-2017, 08:20 AM

Quote:

Originally Posted by 68OrangeSunshine;8052573]What is it? Looks like maybe a Vortec 4.2, but the early '60s oil filler tube/breather cap throws me. Also looks like a Pontiac Catalina/GTO nose, w/ Sprint badge. So is it an El Cabrito? [Sp. for '' little goat'

Some might contend that it is a truck, then.
Can't read the numerals on the fender badge.

It's a Pontiac OHC6, based on the Chevy 230 block.

https://www.google.com/url?sa=t&rct=...66PjstR6GPlOnX

VWNate1 · 10-03-2017, 08:24 PM

Quote:

Originally Posted by IRQVET

250ci Inline 6 out of a 68 C-20 Flat Bed . . .

That's a 292 C.I.D. engine......

IRQVET · 10-03-2017, 08:31 PM

Quote:

Originally Posted by VWNate1

That's a 292 C.I.D. engine......

Dam, I think your right.

VWNate1 · 10-03-2017, 09:41 PM

I am, rejoice ! .

Oscar the grouch · 10-03-2017, 10:56 PM

292 in my 67 k20 long stepper

**'68OrangeSunshine** · 10-04-2017, 02:28 AM

Quote:

Originally Posted by VWNate1

That's a 292 C.I.D. engine......

I didn't catch that at first. Yes, the Pass side motor mount is forward of the fuel pump.
That yellow '68 C/20 also has a strange looking water neck [T/Stat Housing] with a flat spot that could be machined for an opening to mount a temp probe, which I think Old51Sedan is looking for.

IRQVET · 10-04-2017, 12:56 PM

Thanks guys, I'm new to these trucks and to inline 6's in general. Old yellow was the previous owners hay picker upper/ farm truck. The paint job on it is one of the worst DIY jobs I have ever seen, lol.

cjrolke · 10-04-2017, 03:01 PM

here is my little guy

IRQVET · 10-05-2017, 10:58 PM

Anyone here turbo or supercharge their inline 6? I love seeing something different . . .

https://www.youtube.com/watch?v=8uKYVGH6yA8

https://www.youtube.com/watch?v=Vk-AJEkkR9I

And then the token Canadian . . .

https://www.youtube.com/watch?v=3GPy2_aGQKc

06-29-2016, 11:25 PM	#102
rdhowe2006@yahoo.com Registered User Join Date: May 2016 Location: Summit, MS. Posts: 188	Re: how about some pics of inline 6 engines Anyone know where I can get an air filter assembly for my IL 6 Cylinder?

07-04-2016, 04:22 PM	#105
rdhowe2006@yahoo.com Registered User Join Date: May 2016 Location: Summit, MS. Posts: 188	Re: how about some pics of inline 6 engines Hey do you know where I can get an Air Filter Assembly like yours. I have been looking for one like 6 months. I cant even drive my 1970 c10 IL 6 250 because I have no air filter assembly. Any help would be appreciated.

10-02-2017, 06:40 PM	#108
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: how about some pics of inline 6 engines Not in a truck but wouldn't that be cool? Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-02-2017, 07:36 PM	#109
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,513	Re: how about some pics of inline 6 engines What is it? Looks like maybe a Vortec 4.2, but the early '60s oil filler tube/breather cap throws me. Also looks like a Pontiac Catalina/GTO nose, w/ Sprint badge. So is it an El Cabrito? [Sp. for '' little goat''] Some might contend that it is a truck, then. Can't read the numerals on the fender badge. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

10-02-2017, 08:32 PM	#111
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: how about some pics of inline 6 engines Since I was not the one to dig up this thread, I'll add to it. Air cleaner has been replaced and looks much better now. __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

10-03-2017, 12:39 AM	#113
IRQVET Registered User Join Date: Aug 2017 Location: Tallahassee, FL. Posts: 125	Re: how about some pics of inline 6 engines 250ci Inline 6 out of a 68 C-20 Flat Bed . . . Correction, it's a 292ci. (Thanks VWNate1) Attached Images __________________ 1998 Chevy Tahoe 2D 1949 Willys CJ2A 1967 C-20 Flatbed (Sold) Last edited by IRQVET; 10-05-2017 at 11:00 PM.

10-03-2017, 09:41 PM	#117
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,665	Re: how about some pics of inline 6 engines I am, rejoice ! . __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH

10-03-2017, 10:56 PM	#118
Oscar the grouch Registered User Join Date: Oct 2016 Location: los lunas nm Posts: 63	Re: how about some pics of inline 6 engines 292 in my 67 k20 long stepper Attached Images __________________ 1970 chevy k10 305/4 speed

10-04-2017, 12:56 PM	#120
IRQVET Registered User Join Date: Aug 2017 Location: Tallahassee, FL. Posts: 125	Re: how about some pics of inline 6 engines Thanks guys, I'm new to these trucks and to inline 6's in general. Old yellow was the previous owners hay picker upper/ farm truck. The paint job on it is one of the worst DIY jobs I have ever seen, lol. __________________ 1998 Chevy Tahoe 2D 1949 Willys CJ2A 1967 C-20 Flatbed (Sold)

10-04-2017, 03:01 PM	#121
cjrolke Registered User Join Date: Apr 2016 Location: cincinnati oh Posts: 60	Re: how about some pics of inline 6 engines here is my little guy Attached Images

10-05-2017, 10:58 PM	#122
IRQVET Registered User Join Date: Aug 2017 Location: Tallahassee, FL. Posts: 125	Re: how about some pics of inline 6 engines Anyone here turbo or supercharge their inline 6? I love seeing something different . . . https://www.youtube.com/watch?v=8uKYVGH6yA8 https://www.youtube.com/watch?v=Vk-AJEkkR9I And then the token Canadian . . . https://www.youtube.com/watch?v=3GPy2_aGQKc __________________ 1998 Chevy Tahoe 2D 1949 Willys CJ2A 1967 C-20 Flatbed (Sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.