How about some pics of Static Dropped C-10's

[scotts72heavyhalf]

5/7 ECE drop with disc conversion, 245/45/20`s all around a few pics and now in the midst of our frame off, but sticking to the static drop.

[hairlesshobo]

Originally Posted by therapy

Spindles and springs up front flip kit in the rear

Hey therapy, how much drop is this in the front and rear? You mentioned spindles and springs up front but didn't say how much each was. I really like the looks of your truck!

Do you have any other pics of your truck by chance? I would love to see the front and rear suspension up close.

Great job!

[therapy]

Originally Posted by hairlesshobo

Hey therapy, how much drop is this in the front and rear? You mentioned spindles and springs up front but didn't say how much each was. I really like the looks of your truck!

Do you have any other pics of your truck by chance? I would love to see the front and rear suspension up close.

Great job!

I dont have any suspension pics..Has 2 inch spindles,2 inch springs with a coil cut.. Rear is a flip kit I believe that is like 5 and then the over load removed placed on top to dearch the spring to give it even more drop. Has drop shocks on all 4 corners and and a min c in the rear frame rails..This is now my Daily/Project cause I got rid of the other square got a 50 model and now got rid of that.....Im now in the process of buying everything to bag the daily grind..

[Hart_Rod]

5/8 drop... Front: 3" springs, 2" spindle, Rear: 6" springs, 2" block....

[mongoose]

front; 3" spring, 3" spindle, 245/40/20

rear; flip kit, 285/35/20

[stealth_weapons]

Here's mine; 63 C10 front- CPP 3in drop springs,POL Tubular UCA/LCA, 2.5in drop spindles rear-4in CPP drop springs



and underneath;

[snacks]

front ece drop spindle 3'' springs 215/70/15=5.5'' drop
rear leaf sprung flip kit,1'' block,leaf removed 235/70/15= 8'' drop

bed floor over rear end raised and frame mini notched
custom made rear shock mounts upper and lower truck rides so good

[shawno72]

Hey snacks do you have any pics of the mini notch and the rest of the underneath?? BTW your just about 45 minutes north of me.

[snacks]

Originally Posted by shawno72

Hey snacks do you have any pics of the mini notch and the rest of the underneath?? BTW your just about 45 minutes north of me.

next time i pull the bed off ill take some pics, your truck in your avatar is sick is it bagged , one of the best looking ones iv seen

[shawno72]

Originally Posted by snacks

next time i pull the bed off ill take some pics, your truck in your avatar is sick is it bagged , one of the best looking ones iv seen

Not yet... photoshopped for motivation. Will be doing a bag set up later on this year.... if all goes well.

[snacks]

do you do all your own work(welding and fab) if not we can hook up i can help you out if needed

[shawno72]

Originally Posted by snacks

do you do all your own work(welding and fab) if not we can hook up i can help you out if needed

Actually I do all my own work, certified welder, used to do iron work til the economy took a dive. Now I manage the Midas Auto Service in Lodi. Still might get ahold of you for some help, thanks I appreciate that. Hey what would you charge to install a cnotch like you have?

[shawno72]

Originally Posted by Hart_Rod

5/8 drop... Front: 3" springs, 2" spindle, Rear: 6" springs, 2" block....

Hey Hart_Rod are those 5 or 6 lug wheels?

[snacks]

Originally Posted by shawno72

Actually I do all my own work, certified welder, used to do iron work til the economy took a dive. Now I manage the Midas Auto Service in Lodi. Still might get ahold of you for some help, thanks I appreciate that. Hey what would you charge to install a cnotch like you have?

cool man i help run a speedee oil change in roseville, the notch i have is one of those pre fabed cpp notches that i welded in , if you drove down here we could do it in an afternoon ,pull the bed ,cut the frame , weld it in, beer and food on you haha

[shawno72]

Originally Posted by snacks

cool man i help run a speedee oil change in roseville, the notch i have is one of those pre fabed cpp notches that i welded in , if you drove down here we could do it in an afternoon ,pull the bed ,cut the frame , weld it in, beer and food on you haha

Sounds good. I'll let you know, thanks.

[cory d]

flipped and 1 1/2 coils cut off

[shawno72]

Welcome aboard Cory. You are on the best forum on the web!!
Posted via Mobile Device

[OC 72]

The trucks on this last page sure have nice stance!

[cory d]

thanks, ive been a member of c10forum for a while now but this gets allot more traffic

[shawno72]

Here is how mine looks today.



And here is how I want it to look by the end of the year I still have the stock steelies and will put them back on when I bag it.

[creativecustoms]

Originally Posted by TxSqueeze

Here's mine with a 5.5/7 and 20's

Where can I find these wheels? I've searched all over and can't find 20x10/5x5 anywhere

Thanks

[bigsmitty75]

Is there anyone out there can help me out with my dilemma. I have a '85 GMC SWB. 2WD that I'm currently restoring. I want to do a static drop on my truck. The wheels that I'm gonna run are a 24x9 with a 255/30/24 in the front and a 24x15 with a 405/25/24 in the rear. I don't want to bag my truck. Can some please help a brother out?

[Slammed66]

What's the dilemma??
Posted via Mobile Device

[Narxoleptic Customs]

Bigsmitty75:
R u going to have room to run a 15" wide rear wheel and not narrow the frame? If u don't have to narrow the rear frame: Just do a flip rear kit (5-7" drop) and 3" spindles and 2" coils for the front.
If u do have to narrow the rear frame: it sounds like u r in over ur head, find a shop close to u and pay them to do it...
Posted via Mobile Device

[bigsmitty75]

I am going to narrow my rear end in order to accommodate the 24x15 rim in the rear.