Project TiC TaC cause it gonna be orange..... - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

offlimts502 · 05-27-2013, 01:18 PM

That pic really screwed me up for a second until I realized that's a huge mirror in your garage.

What did product did you use for the floor and did you do it yourself?

**oldman3** · 05-27-2013, 01:35 PM

Sweeeeeet....Jim

Valhalla · 05-27-2013, 02:30 PM

Quote:

Originally Posted by offlimts502

That pic really screwed me up for a second until I realized that's a huge mirror in your garage.

What did product did you use for the floor and did you do it yourself?

I had a company that typically does large warehouses do it for me. I have installed a few of these systems over the years with friends each of which did not last so long. This one has a warranty of 10 years and the company said if it's just a normal garage shop scenario it should last as long as the house.

It's a pretty thick multiple stage product came out looking really nice.

Got a couple brand-new workbenches and a brand-new 80 gallon compressor going in the corner. Had the builder wire it up for dedicated 30 amp dedicated 50 amp and dedicated 20 amp circuits on the garage placed where I intend to put my welders and things.
Posted via Mobile Device

Valhalla · 08-15-2013, 09:33 PM

Finally it's all in the same garage again and ready to go back together

Posted via Mobile Device
Posted via Mobile Device

trashmanryan · 08-15-2013, 10:28 PM

Posted via Mobile Device

RRC · 08-15-2013, 10:48 PM

Nice!!!
Posted via Mobile Device

Valhalla · 09-01-2013, 01:41 AM

Finally going back together !!!!!!

Posted via Mobile Device

Valhalla · 09-01-2013, 05:53 PM

For some reason my notches lined up like crap the second time around I lame powder coating place it's like the were bent to **** . But now waiting on my rear end to finish it up . Just a few more bolts and I'm done for the day

Posted via Mobile Device

**oldman3** · 09-01-2013, 09:11 PM

Looks good...Jim

STOCKISH · 09-01-2013, 09:34 PM

Looking great.

Chvy2NV · 09-02-2013, 01:29 PM

Looks good. Nice progress.
Posted via Mobile Device

Valhalla · 09-06-2013, 10:01 PM

Finally found a 67 rear end for my build its a one legger but at least I have it. Also for a full 67 front clip zero rust only two small dents for 475 bucks !!!!

Posted via Mobile Device

**oldman3** · 09-07-2013, 09:12 AM

Nice score....Jim

**67cheby** · 09-07-2013, 10:51 AM

oh yea, I like where this is headed !

Valhalla · 09-07-2013, 02:31 PM

Quote:

Originally Posted by 67cheby

oh yea, I like where this is headed !

It's headed to some trim work for your sloshtubz !!!!!
Posted via Mobile Device

jtp67-72 · 09-07-2013, 09:27 PM

here's a little motivation...............it does me every time i look at-em......jim

Valhalla · 09-08-2013, 12:44 AM

Very true my set is still in the box on a shelf!

Valhalla · 09-10-2013, 12:21 AM

Well got the rear tore down to inspect and pulled the drums and backing plates ! Never seen spider gears so sheared on a few of the teeth but its good for a roller it's getting a trutrac anyways !

Posted via Mobile Device

Valhalla · 09-15-2013, 08:17 PM

Drop member going in!!!!!!!!

And the new 67 front is looking real happy

Posted via Mobile Device

builtbyKane · 09-15-2013, 08:56 PM

Nice progress!
Posted via Mobile Device

Valhalla · 09-16-2013, 09:01 PM

Well I got the majority of the front drop member together today

Posted via Mobile Device

**oldman3** · 09-16-2013, 11:16 PM

Sweeeeeeeet....Jim

Valhalla · 09-23-2013, 10:15 PM

Well got the lower arm in and ran into a issue with the shafts for the uppers but Nate in porterbuilt fashion took care of me and hooked me up with the new style!

I forgot to get the shorter bolts for them while I was there though looks like I get to go back lol.

The old

The new much nicer too!!!!!

Posted via Mobile Device

**oldman3** · 09-23-2013, 11:25 PM

Nice looking parts...Jim

Valhalla · 09-24-2013, 11:00 PM

So I am gonna start deciding on what wire set up to go with. I am by no means a car electronics guy!..

Any suggestions on what to get.

I would like to be able to hid the majority of the wiring. Engine will be an LS with the fuel rail efi computers.

Any suggestions would help.

05-27-2013, 01:18 PM	#101
offlimts502 Registered User Join Date: Sep 2010 Location: Gilbert, AZ Posts: 28	Re: Project TiC TaC cause it gonna be orange..... That pic really screwed me up for a second until I realized that's a huge mirror in your garage. What did product did you use for the floor and did you do it yourself?

05-27-2013, 01:35 PM	#102
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Project TiC TaC cause it gonna be orange..... Sweeeeeet....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

08-15-2013, 09:33 PM	#104
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... Finally it's all in the same garage again and ready to go back together Posted via Mobile Device Posted via Mobile Device __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

08-15-2013, 10:28 PM	#105
trashmanryan Registered User Join Date: Nov 2010 Location: Hulbert, Ok. Posts: 53	Re: Project TiC TaC cause it gonna be orange..... Posted via Mobile Device

08-15-2013, 10:48 PM	#106
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Project TiC TaC cause it gonna be orange..... Nice!!! Posted via Mobile Device __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

09-01-2013, 01:41 AM	#107
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... Finally going back together !!!!!! Posted via Mobile Device __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

09-01-2013, 05:53 PM	#108
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... For some reason my notches lined up like crap the second time around I lame powder coating place it's like the were bent to **** . But now waiting on my rear end to finish it up . Just a few more bolts and I'm done for the day Posted via Mobile Device __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

09-01-2013, 09:11 PM	#109
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Project TiC TaC cause it gonna be orange..... Looks good...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-01-2013, 09:34 PM	#110
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Project TiC TaC cause it gonna be orange..... Looking great. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

09-02-2013, 01:29 PM	#111
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: Project TiC TaC cause it gonna be orange..... Looks good. Nice progress. Posted via Mobile Device

09-06-2013, 10:01 PM	#112
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... Finally found a 67 rear end for my build its a one legger but at least I have it. Also for a full 67 front clip zero rust only two small dents for 475 bucks !!!! Posted via Mobile Device __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

09-07-2013, 09:12 AM	#113
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Project TiC TaC cause it gonna be orange..... Nice score....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-07-2013, 10:51 AM	#114
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project TiC TaC cause it gonna be orange..... oh yea, I like where this is headed ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-07-2013, 09:27 PM	#116
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Project TiC TaC cause it gonna be orange..... here's a little motivation...............it does me every time i look at-em......jim Attached Images __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

09-08-2013, 12:44 AM	#117
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... Very true my set is still in the box on a shelf! __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan



Register or Log In To remove these advertisements.

09-10-2013, 12:21 AM	#118
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... Well got the rear tore down to inspect and pulled the drums and backing plates ! Never seen spider gears so sheared on a few of the teeth but its good for a roller it's getting a trutrac anyways ! Posted via Mobile Device __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

09-15-2013, 08:17 PM	#119
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... Drop member going in!!!!!!!! And the new 67 front is looking real happy Posted via Mobile Device __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

09-15-2013, 08:56 PM	#120
builtbyKane Registered User Join Date: Oct 2012 Location: mountain home, AR Posts: 794	Re: Project TiC TaC cause it gonna be orange..... Nice progress! Posted via Mobile Device __________________ Project Double Tap http://67-72chevytrucks.com/vboard/s...d.php?t=555901 69 Olive Verde http://67-72chevytrucks.com/vboard/s...d.php?t=734720

09-16-2013, 09:01 PM	#121
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... Well I got the majority of the front drop member together today Posted via Mobile Device __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

09-16-2013, 11:16 PM	#122
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Project TiC TaC cause it gonna be orange..... Sweeeeeeeet....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-23-2013, 10:15 PM	#123
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... Well got the lower arm in and ran into a issue with the shafts for the uppers but Nate in porterbuilt fashion took care of me and hooked me up with the new style! I forgot to get the shorter bolts for them while I was there though looks like I get to go back lol. The old The new much nicer too!!!!! Posted via Mobile Device __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

09-23-2013, 11:25 PM	#124
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Project TiC TaC cause it gonna be orange..... Nice looking parts...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-24-2013, 11:00 PM	#125
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: Project TiC TaC cause it gonna be orange..... So I am gonna start deciding on what wire set up to go with. I am by no means a car electronics guy!.. Any suggestions on what to get. I would like to be able to hid the majority of the wiring. Engine will be an LS with the fuel rail efi computers. Any suggestions would help. __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

Register or Log In To remove these advertisements.