1965 chevy truck one piece @a time

[rmvlt1100]

I just finished look at your progress and your build is coming along great. I seems like there is never enough time in the day to get things done that you want to get done. Can't wait to see more pictuers.

[niterider65]

Ok it's back to work on the truck .. had to play boss while dad was in maui.
but now there back i can start on the truck again .
Here is a few pics of the stuf ive bought . and striped. one of the block off plates woun't fit.. ill have to fab something untill i mount the blower box and keep the trash and heat out .

[niterider65]

a few pics of the steps i started stripping the before i took any before pics .but heres a few during and almost

[niterider65]

and the last four for today
its off to the paint store this week for some expoxy primer and some 2k hight build primer or some self eching primer and 2k not sure which yet

[niterider65]

look what happen when you clean up ... you can find stuff
should beable to get going again now put up the shelving and found
part i didn't know i had !

[niterider65]

whell after after spendin saturday rearanging the shop. got the blast cabnet going and striped some more stuff to get ready for the powder coater this week

[niterider65]

[LostMy65]

In case you're looking....
There's your crescent wrench next to the orange string.
btw.. You're doing nice work.

[chad64chevy]

Originally Posted by LostMy65

In case you're looking....
There's your crescent wrench next to the orange string.
btw.. You're doing nice work.

thats funny, i had to look for the orange string first, LOL!!!


niterider, i'll help you clean up a lil and take a set of front fenders!! i need to start saving a few parts, truck parts are looking good, keep it up!!

[niterider65]

Dang thats where i put that crescent wrench !! Thanks Chad the rear step fenders where wraped in paper from gm one is still banded and the other one i had to unwrap the paper was wasted and i had to stop the rust spots before the rust start in . there solid .1957 make .. and the fronts
are there 2 drivers and one pass side . nos also ..

[Alan's Classic]

It's always fun cleaning and straightening up. It's like a treasure hunt. Lookin good!!
Posted via Mobile Device

[chad64chevy]

from the pictures i see 3 black, 2 blue, and 2 patina front fenders!! how many trucks do you have if you dont mind me asking??

[niterider65]

So far chad its just one truck i run a cross people from time to time that sell stuff cheap and im going to use the best of wht i got .. i might get one more truck to build an prostreet . but ive got tomany irons in the fire and still looking for an model a body for the extra frame ve got to build an coupe with that i bought . the one that is being built now will be running an ls3 with an six speed trans . just a couple pics of the coupe so far and i did trow one in of the truck from way back .. i know its a ford coupe
But its has a ls3 motor 6sp trans chevy
jag rear indpendent rear disc brakes
super bell drop axle wilwood brakes up front
about the only thing ford about it is the body {still a work in progress } and this is back before i finished out the paneling in the shop it was a metel building not paneled out so it was nice and toasty in the summer

[chevyrestoguy]

It's always a good thing to clean up. It makes you feel better, and you always find stuff you thought you had lost.

I'm diggin' the Model A! I am a big fan of the early (pre-'49) Fords. Your coupe looks to be really solid, and with the LS3 and a 6-speed, that car is going to fly! As light as it will be, it'll get great gas mileage too. I know that the "traditionalists" might grumble about the late model drivetrain, but I don't drive with my hood open, so what does it matter? I like it!

[niterider65]

Thanks Chevy restoguy I do have the hood set up for it with 32 grill shell . im getting coments from both sides saying run it with a hood and some don't but to each there own ..
the other frame i have the flat head abd the 39 3 speed set up just need the body ive got the frame its pinched 32 for a coupe body .. it will be done old school.
Thanks Again
Bill

[niterider65]

Sent the stuff off to have powder coated to day should get it back next week . bead blasted some more stuff to get ready to prime and paint .

[niterider65]

[niterider65]

[niterider65]

heres some of the fresh air vents not sure if i need to drill all the rivets out to replace the seal

[LostMy65]

Soon you'll be putting it back together one piece at a time....
Posted via Mobile Device

[niterider65]

Im about out of parts to strip paint from .. i'm thinking your right. it might go a little faster putting it back to gether .. one pice at a time ..

[allaboutchevelles]

Nice progress on the truck parts. What did you blast them with? I got to do my ash tray and glove box door also. Keep up the good work.

[niterider65]

i use my blast cabnet with fine glass bead it a little slower with fine but it dose a real good job .. im hoping for some good warm weather here next coupe weekends to get it primered .. ill be out in the shop working on the truck sunday and watchin the daytona from time to time .. watch the start
and watch the last 10 lapes rest of the time on the truck .

[niterider65]

some happend today I sanded something and primeded it.and painted it all in one after noonMMM it could be a start to getting it back together .. .

[niterider65]

all so clean an extra set of fender extentions