TX Parting These Three Trucks

[70STOVEBOLT]

Originally Posted by lynnfield

70stovebolt, CST emblem has one broke stud. $15 shipped

Greg, I am going to pass for now, I was hoping the studs would be intact. Thanks for taking the time to remove it and post pics.

Mark

[midniteblues]

Originally Posted by lynnfield

Kent63, the 72' has decent trim, it's the shallow channel on the windshield, and the rear is not a problem. Unless you want to pick it up, that stuff usually doesn't ship well. Might try Randy (teeitup), I bet he can help you and he's in your neck of the woods. If not let me know

midniteblues, I have some dark olive ones here........somewhere....Or are you needing the light green color?

yes Im needing the light green vents if you have some let me know thanks

[mcbassin]

Originally Posted by lynnfield

Mcbassin, screaminchevypickup, cab pics posted for ya.

Greg,
Thanks for the pictures. I'm looking for a pretty "rust free" cab I'm passing. thanks

[68 Four on the Floor]

I'll take em both. What's my total
Posted via Mobile Device

[chewychevy67]

payment sent for the 67 power steering pulley.

[bollybib]

Originally Posted by lynnfield

bollybib, top A/C bracket, $16 shipped.

I'll take it. PM me your info.

Just to be clear, this is the bracket we are talking about.

[BigRed76]

Originally Posted by lynnfield

BigRed76, I can get the one off the brown truck and check it out. I'll get back to you when it comes off. Yes, the steering wheel is black and it has cracks. Not the worst I've seen, $30 I'll get pics up.

Sounds good. I'll take the black steering wheel for $30

[danny6892002]

what will the price be on the trim of both doors,trim of the front fenders and the lower cab to 78552

[Kent63]

Originally Posted by lynnfield

Kent63, the 72' has decent trim, it's the shallow channel on the windshield, and the rear is not a problem. Unless you want to pick it up, that stuff usually doesn't ship well. Might try Randy (teeitup), I bet he can help you and he's in your neck of the woods. If not let me know

midniteblues, I have some dark olive ones here........somewhere....Or are you needing the light green color?

Thanks for the feedback. Randy actually lives about 20 minutes from my house, so I will give him a shout.

[DeadheadNM]

Greg - no prob, appreciate the heads up. Is the RH housing intact? I'd consider the gold ones on the other truck if those are solid or I can figure out some small parts that I need. Also, I need a solid under dash S-duct - any chance you have one? Thanks, Pete

Originally Posted by lynnfield

DeadHeadNM, I found a hole drilled in those A/C housings, with a rivet holding the hose connector piece on. The door rubber covers it. Also, I found a crack on one at the top, that I didn't catch last night. Sorry, my fault, let me know if you want a refund. Thanks, Greg

[Drewbee]

The GMC - would you be willing to sell the rear spring hangers off of it?

If so how much?

Thanks , Drew

[nate_g_2003]

Is that bench seat available for sale? I'm looking for a bench seat and all hardware to attach it to the cab.

[stealthy '69]

Originally Posted by lynnfield

stealthy '69, usually they are bolted at the top and have clips at the bottom $12 shipped for everything. I can get a pic if you need.

Please do. I might be looking at something weird. I'll try to get a pic of my lower mounts too.

[lynnfield]

Pics for toomuchstuff

[lynnfield]

nate_g_2003, the white one that was in the GMC is available, good foam, needs recovering. $50 picked up.

[lynnfield]

BigRed76, pics of the steering wheel. It will need to ship seperate from the power gear box. Would $35 shipped on the wheel be ok?

[lynnfield]

One more

[lynnfield]

68 Four on the Floor, pics of the two trim pieces. $30 shipped for both pieces, the size of the box gets quite a bit larger for the door trim.

[lynnfield]

stealthy '69, these clips are for a 4 row radiator, but will work with 2 and 3 row. I have a set on a truck with a three row (last pic) if you would rather have those, same price.

[lynnfield]

bollybib, your bracket. I'll send PM in a bit.

[lynnfield]

WETOWM, Rich, your cable. sending PM

[lynnfield]

Horseman, $12 shipped

[lynnfield]

Nightmare, the front cross member was the only thing damaged, the rivets pulled thru. This 67 frame does not have the indent for the power steering, I think the other frame would be better if you can wait for it. I'm going to send you a PM with my phone#.

[lynnfield]

DeadheadNM Pete, these vents should fix you up, no broken tabs. I have this "s" duct, it has one small crack $7 and I'll add it to the pile. Greg

[DeadheadNM]

Definitely take the vent balls. My S duct is in similar shape so I'll pass on that. I appreciate all your help Greg. Thanks, Pete

Originally Posted by lynnfield

DeadheadNM Pete, these vents should fix you up, no broken tabs. I have this "s" duct, it has one small crack $7 and I'll add it to the pile. Greg