KS Parting out 72 Chevy 3/4 ton SB Custom Camper - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**gmc 2500 4x4** · 10-24-2012, 07:34 PM

Quote:

Originally Posted by Cash3481

GMC 2500:
I can send you all three for $20.
May seem like a lot but it makes the seat tracks useless to me after I send em. LMK
Mike

so there are 2 of these circled in white is what im asking

**Cash3481** · 10-24-2012, 07:50 PM

Quote:

Originally Posted by gmc 2500 4x4

so there are 2 of these circled in white is what im asking

Yes there is one on each side (it locks the tracks after you adjust the seat position). There is one of each small springs on each side as well.
Mike

**gmc 2500 4x4** · 10-24-2012, 07:57 PM

i bought a set of tracks and thought they were both there, probably in garage somewhere among my stuff... post a pic what you are sending me please if ya would, thanx, paul

**Cash3481** · 10-24-2012, 11:02 PM

Quote:

Originally Posted by thelonerife

got the tailgate trim and scripts. thanks

Glad they made it there, safe I assume!

Quote:

Originally Posted by gmc 2500 4x4

are there 2 of these? ( circled right)i only have one, and i am lacking this long one

I will send you 2 of each of the ones posted... Pics coming!

Quote:

Originally Posted by LEX

Mike, what condition are the parking lamp assemblies in? Any better pics of them? Thanks

Pic coming!

Mike
Posted via Mobile Device

**Cash3481** · 10-24-2012, 11:30 PM

LEX:
Here is Pics of the Parking lights!
$35 shipped with the chiped lens (its under the bumper opening)
$25 Shipped for the stress crack appearing ones. (surface rust on back)
All have good pigtails on them.
Mike

**Cash3481** · 10-24-2012, 11:36 PM

Lee H:
A/C Flapper plastic holder and nut for inside firewall. $8 shipped

GMC2500:
Seat Spring Pics (I took one of each for the picture)
You need a set of each total... you already have one of each correct?
$20 shipped for all 4 springs!

**gmc 2500 4x4** · 10-25-2012, 05:11 AM

sorry i need this clip with spring. and the long wire w/springs that go between the 2 tracks. thats all i need>>>lol

**Cash3481** · 10-25-2012, 06:27 AM

Quote:

Originally Posted by gmc 2500 4x4

sorry i need this clip with spring. and the long wire w/springs that go between the 2 tracks. thats all i need>>>lol

I have all that for you!
I'll get it off and ready.
1 Long wire, 2 small springs, 2 clips with springs.
$25 shipped, lmk and I'll send my pp.
Mike
Posted via Mobile Device

**gmc 2500 4x4** · 10-25-2012, 06:46 AM

i'll take bro<<pm me

LEX · 10-25-2012, 07:41 AM

Quote:

Originally Posted by Cash3481

LEX:
Here is Pics of the Parking lights!
$35 shipped with the chiped lens (its under the bumper opening)
$25 Shipped for the stress crack appearing ones. (surface rust on back)
All have good pigtails on them.
Mike

Mike, will you take $25 for the better set without the lens?

**gmc 2500 4x4** · 10-25-2012, 07:51 AM

Quote:

Originally Posted by Cash3481

I have all that for you!
I'll get it off and ready.
1 Long wire, 2 small springs, 2 clips with springs.
$25 shipped, lmk and I'll send my pp.
Mike
Posted via Mobile Device

dough sent, address should appear in paypal payment

**Cash3481** · 10-25-2012, 08:22 AM

Quote:

Originally Posted by gmc 2500 4x4

dough sent, address should appear in paypal payment

I got it... Going out priority at lunch.
Mike

**gmc 2500 4x4** · 10-25-2012, 09:04 AM

simply awesome!

**Cash3481** · 10-25-2012, 09:15 AM

Quote:

Originally Posted by LEX

Mike, will you take $25 for the better set without the lens?

Done, Sending my PP now!

Lee H · 10-25-2012, 09:34 AM

Quote:

Originally Posted by Cash3481

Lee H:
A/C Flapper plastic holder and nut for inside firewall. $8

I'll take it. Send me your PP info and I'll send you the money, Lee
Posted via Mobile Device

LEX · 10-25-2012, 10:06 AM

Quote:

Originally Posted by Cash3481

Done, Sending my PP now!

Payment sent. Thanks!
Posted via Mobile Device

**Cash3481** · 10-25-2012, 10:48 AM

Quote:

Originally Posted by Lee H

I'll take it. Send me your PP info and I'll send you the money, Lee
Posted via Mobile Device

Quote:

Originally Posted by LEX

Payment sent. Thanks!
Posted via Mobile Device

Received both payments... Ill get them out today.

Mike

**Cash3481** · 10-25-2012, 02:07 PM

Quote:

Originally Posted by LEX

Payment sent. Thanks!
Posted via Mobile Device

Shipped

Quote:

Originally Posted by Lee H

I'll take it. Send me your PP info and I'll send you the money, Lee
Posted via Mobile Device

Shipped

Quote:

Originally Posted by gmc 2500 4x4

simply awesome!

Shipped

Everyone either will have a pm on tracking (if it was a gift) or its in PP if I could add it.

Thanks for all for buyng my stuff.

Mike

**cericd** · 10-25-2012, 02:19 PM

Hey Mike, did you ever come across the other set of exterior handles or the other lighter? Thanks.

-Chris

**Cash3481** · 10-25-2012, 02:23 PM

Quote:

Originally Posted by cericd

Hey Mike, did you ever come across the other set of exterior handles or the other lighter? Thanks.

-Chris

Shoot Chris,
I did get the other handles, (not so good).
I have the lighter removed from this truck too. Ill post a pic tonight.
I really forgot about the picture of it. I have a couple SWB trucks I have to get back to the house and there is several extra doors with it. Ill get you a picture when they get to the house. Ill be gone for a week but when I return Ill get you squared away. Should have them picked up tomorrow...maybe
Mike

**cericd** · 10-25-2012, 02:34 PM

I saw a picture earlier in this thread of a lighter that is all silver and an extra trim ring. Is that the one you're talking about?

**Cash3481** · 10-25-2012, 03:00 PM

Quote:

Originally Posted by cericd

I saw a picture earlier in this thread of a lighter that is all silver and an extra trim ring. Is that the one you're talking about?

cericd:
Here is the original cigarette lighter I removed from the truck.
I also have the ones with the rings but you identified that was not what you were looking for!
Mike

Bierkan · 10-25-2012, 11:27 PM

If not already spoken for, I'll take the power brake booster assembly with rod & hardware.

**Cash3481** · 10-25-2012, 11:58 PM

Quote:

Originally Posted by Bierkan

If not already spoken for, I'll take the power brake booster assembly with rod & hardware.

I have one. I'll get you a picture to review. If I don't get it reviewed and paid by tomorrow I am going on vacation Sat until the following Sat. Not pushing you just making you aware I will be unavailable all week.
Mike
Posted via Mobile Device

J-Rod67 · 10-26-2012, 10:35 AM

Did this have an original small block V8. If so, I am looking for V8 engine mount towers. If you have them can you post a pic and price?

10-24-2012, 07:57 PM	#103
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper i bought a set of tracks and thought they were both there, probably in garage somewhere among my stuff... post a pic what you are sending me please if ya would, thanx, paul

10-24-2012, 11:30 PM	#105
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper LEX: Here is Pics of the Parking lights! $35 shipped with the chiped lens (its under the bumper opening) $25 Shipped for the stress crack appearing ones. (surface rust on back) All have good pigtails on them. Mike Attached Images

10-24-2012, 11:36 PM	#106
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Lee H: A/C Flapper plastic holder and nut for inside firewall. $8 shipped GMC2500: Seat Spring Pics (I took one of each for the picture) You need a set of each total... you already have one of each correct? $20 shipped for all 4 springs! Attached Images

10-25-2012, 05:11 AM	#107
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper sorry i need this clip with spring. and the long wire w/springs that go between the 2 tracks. thats all i need>>>lol Attached Images

10-25-2012, 06:46 AM	#109
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper i'll take bro<<pm me

10-25-2012, 09:04 AM	#113
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper simply awesome!

10-25-2012, 02:19 PM	#119
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Hey Mike, did you ever come across the other set of exterior handles or the other lighter? Thanks. -Chris

10-25-2012, 02:34 PM	#121
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper I saw a picture earlier in this thread of a lighter that is all silver and an extra trim ring. Is that the one you're talking about? __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

10-25-2012, 11:27 PM	#123
Bierkan Registered User Join Date: Oct 2012 Location: Sumner, IA Posts: 213	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper If not already spoken for, I'll take the power brake booster assembly with rod & hardware. __________________ James "Bierkan" Vierkant 1950 3100 on a 1972 C10 Chassis Truck Blog Motorcycle Blog

10-26-2012, 10:35 AM	#125
J-Rod67 Registered User Join Date: Feb 2008 Location: Appling, Ga Posts: 20	Re: Parting out 72 Chevy 3/4 ton SB Custom Camper Did this have an original small block V8. If so, I am looking for V8 engine mount towers. If you have them can you post a pic and price?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.