static dropped square bodies with 15s

[superwade57]

Here's mine 6/8 3" spindles 1.5 cut coils flip and 2 in drop shackles out back. More pics later. Ps. T56 4.10 posi

[Big Daddy Draayom]

1983, 4/6, cut 2 coils, and flip out back.

[85/Silverado]

Originally Posted by Big Daddy Draayom

1983, 4/6, cut 2 coils, and flip out back.

You running Headers?

[Big Daddy Draayom]

Stock manifolds.

[85/Silverado]

Originally Posted by Big Daddy Draayom

Stock manifolds.

Thanks Neighbor.

[Shady Rascal]

5/6 drop on 15" Cragars.

[lobuck64]

My 73 3in coils frnt flip kit rear 245-60-15 on 8in rallies

[Houston Ben]

2/4 drop (springs and shackles) w/ 275/60/15 all around. I think I need to put OG springs back on and get 3" spindles.

[mongocanfly]

Good lookin truck Ben.

[Houston Ben]

Thanks!

[yrik]

Flip kit in the rear. 3" spindles and 1" coils in the front. All belltech.
15 x7 factory alloys with 235/75/15s.
The front needs to come down some more.

[Custom.Chevy]

back when it was still ridin high. i think this was at the time a 2/4 drop ? its been a while.

[Custom.Chevy]

currently a work in progress. not on 15s but its still static dropped. figure its about 4 to 5 in the front and a flip kit with shackle in the rear with some springs pulled out only because thats what i did in highschool and thought it was cool lol . sad . now i need to buy new springs or go coil over with 4 link. im torn. bed is currently off.

[Mr.Chevy4x4]

My clear coat peeling peach! Current build project. It has 2.5 spindles and 1 coil cut, and rear flip. 15x8 up front and 15x10 in the rear. Installing a 5.3/4L80E with 76mm turbo and retaining the A/C. Going to wait until all of the weight is back on the front end before deciding whether or not more cutting of the front spring will be required.

Mike

[RootBeerFXS]

5/7

[jpnh]

My84

[ShinyC10]

Mine is 7" lower on all four corners

[Moose62]

1979 Big 10 Dropped on stocks, awaiting 20" Detroit steel.
The drop in case others want to know....
Western chassis 2.5" spindles and 2" coils
Belltech rear flip kit, didn't use c notch yet
Belltech drop shocks 4" and 6"

Got 4.5" out of the front, and I think 6.25" from rear. There is about 2" between the rear axel and frame still. And truck is leveled at 26.5" to the center of each fender well. Stock 15x8 with 255/75-15 truck turns but rubs at full lock. I would not recommend 15" with drop spindles as I had to cut the balance weight off the back of the rims because new spindle steering rod mount is about 1/8" from touching the inner rim lip.

[RootBeerFXS]

With 15" Cragars

[bbbc10]

I gotta get a set of cragars

[RootBeerFXS]

Originally Posted by bbbc10

I gotta get a set of cragars

Special order thru Newstalgia and you can just about any backspacing you want. Not too expensive either.

[vht]

Very nice trucks, glad to see some running around that don't have the 20's and 22's on them.

[swb85]

4/4 drop with wheel vintiques vette ralleys, 255 up front and 295 rear

[Houston Ben]

SWB85, I really like the look of your 4/4 drop and may have to get 2" spindles to go along with my 2" springs!

Does anyone make a 2" spindle???

[swb85]

Not sure....I used 2.5" spindles and cut the factory springs