Blazer half cabs - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

twaters24 · 07-28-2016, 02:10 PM

Does anyone know if there is somewhere that you can still purchase these half cabs or even full top?

Chulisohombre · 07-28-2016, 02:51 PM

There is a guy on here that had the original Molds and was going to try to build them again. I think He had a hard time finding a glass shop that was willing to do the work. I'll look but I used to have a link to another guy that was also building them custom but they weren't cheap. I used to have one where the guy cut up the original full top and worked the back hatch into the front half of the top. Looked pretty good but I wanted to be fully topless because I had my kids and they all wanted to ride in the blazer too.

Tuff Gong · 07-28-2016, 03:02 PM

I personally don't like the way these look. It reminds me of when guys try to cut a long bed down to a short bed and they don't get it right.

Chulisohombre · 07-28-2016, 03:05 PM

http://sexyhalftop.com

LUV2XCLR8 · 10-31-2016, 08:15 AM

Quote:

Originally Posted by twaters24

Does anyone know if there is somewhere that you can still purchase these half cabs or even full top?

Yes, his board name is Boneyard, but he was having
issues last i heard with Glass guy, and also his health.

I have had 3 tops (1 Pacesetter, 1 MTP, and 1 Custom)
and find used ones on average of 1-2 per year. Used is
cheaper, but not by much. Sexy guy linked above quit
making them last I heard / and was asking too much.

CC

Rickenbach · 11-01-2016, 12:26 PM

No offense, but that looks like a Korean knock-off of a Blazer.

**raggedjim** · 11-01-2016, 01:01 PM

Quote:

Originally Posted by LUV2XCLR8

Yes, his board name is Boneyard, but he was having
issues last i heard with Glass guy, and also his health.

I have had 3 tops (1 Pacesetter, 1 MTP, and 1 Custom)
and find used ones on average of 1-2 per year. Used is
cheaper, but not by much. Sexy guy linked above quit
making them last I heard / and was asking too much.

CC

Do you have a line on new weather stripping for the MTP half-top? Mine is shot...

Thanks, Rg

RustyBucket · 11-06-2016, 11:13 AM

Quote:

Originally Posted by Rickenbach

No offense, but that looks like a Korean knock-off of a Blazer.

I think the images are squashed a little and make the Blazer look too narrow and tall or fat in the middle.

I have an MTP top that needs paint. I need door and front seals and the rubber around the back window has a gap at the bottom. I never sat it on my Blazer but I'm afraid the hi-back Dodge Durrango buddy buckets are gonna hit the back window. Have the original seats that need recovering. MORE $$$$ !!
PO made a soft half top that closes up pretty good. Uses a cut out inner foof from a pick up to give it shape. 15-20min. install time and I think it's ugly. Maybe because of the Gaylord's hard bed cover but topless in the rain is AWFUL. In a regular convertible as long as you don't stop you don't get too wet. In the Blazer rain blows onto the inside of the windshield from behind(back of my head too) just about as hard as outside. Wipers and defroster on high and I'm flyin' blind.

**CMACDONALD1** · 11-09-2016, 04:06 PM

I passed on one of these at a swap meet about five years ago because the guy wanted 1800.00 for it( I thought that was a crazy price). in a way I should have jus bought it because I have been on the hunt for one ever since. I don't think they were very common up here I Canada. It would be a nice alternative to the full roof.

Chulisohombre · 11-09-2016, 05:07 PM

That soft top one don't look too bad. Definitely different though.

american revolution · 11-17-2016, 04:37 AM

Quote:

Originally Posted by Rickenbach

No offense, but that looks like a Korean knock-off of a Blazer.

Lol ....pretty accurate description

skorpioskorpio · 11-18-2016, 06:14 PM

Quote:

Originally Posted by american revolution

Lol ....pretty accurate description

Posts deleted

LUV2XCLR8 · 11-23-2016, 08:53 AM

Quote:

Originally Posted by raggedjim

Do you have a line on new weather stripping for the MTP half-top? Mine is shot...

Thanks, Rg

Rg,

Sorry just saw this, hardly ever on this site much.

Some of the seal are same as a Single Wall, might
want to contact a board vender and go from there.

CC

**raggedjim** · 11-23-2016, 10:23 AM

Quote:

Originally Posted by LUV2XCLR8

Rg,

Sorry just saw this, hardly ever on this site much.

Some of the seal are same as a Single Wall, might
want to contact a board vender and go from there.

CC

Thanks, I figured I'd have to make something work from a full top.

Rg

bcdeutsch731 · 02-22-2017, 06:53 AM

I'm looking to sell my half top if anyone is interested let me know. Shoot me a text message and I'll send pics of it.
Brett 630-234- seven six six six

bcdeutsch731 · 02-22-2017, 10:05 PM

Quote:

Originally Posted by bcdeutsch731

I'm looking to sell my half top if anyone is interested let me know. Shoot me a text message and I'll send pics of it.
Brett 630-234- seven six six six

Sold!

LUV2XCLR8 · 03-16-2017, 06:34 AM

Quote:

Originally Posted by LUV2XCLR8

Yes, his board name is Boneyard, but he was having
issues last i heard with Glass guy, and also his health.

CC

I pm'd him and offered to buy the molds, no response.

Could sell probably 8-10 of these right now, get offers
all the time on mine. I also have a machine shop lined
up to make the bulkheads as well. I just need molds !

CC

**lks dcvn** · 03-16-2017, 06:03 PM

What was the cost range to have the bulkheads made? The one I have has some rust. Not a lot - but enough where I would ask how much to replace it.

**jaros44sr** · 03-16-2017, 08:49 PM

x2

bL.A.zer90045 · 03-16-2017, 09:41 PM

Making one for one of my 71 jimmy's out of truck cab that I have plenty of

when done I'll be selling these for 2k w/bulkhead.

garciajulian · 03-24-2017, 12:04 AM

Quote:

Originally Posted by bL.A.zer90045

Making one for one of my 71 jimmy's out of truck cab that I have plenty of

when done I'll be selling these for 2k w/bulkhead.

Sounds good

Tuff Gong · 03-29-2017, 11:32 PM

Here's one for sale close to me. $200

https://phoenix.craigslist.org/nph/pts/6061387732.html

mister.freeze · 03-30-2017, 05:03 PM

shouldn't that have a back window?

Tuff Gong · 03-30-2017, 05:26 PM

Probably a homemade one. I don't know much about them other than I don't like the way they look. LOL

Chulisohombre · 03-30-2017, 05:27 PM

They chopped out the back window for the rollbar. Kinda kills it as it would need a lot more work to make it a half top again instead of just a sun roof.

07-28-2016, 02:10 PM	#101
twaters24 Registered User Join Date: Jul 2016 Location: Council Grove, KS Posts: 7	Re: Blazer half cabs Does anyone know if there is somewhere that you can still purchase these half cabs or even full top?

07-28-2016, 02:51 PM	#102
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Blazer half cabs There is a guy on here that had the original Molds and was going to try to build them again. I think He had a hard time finding a glass shop that was willing to do the work. I'll look but I used to have a link to another guy that was also building them custom but they weren't cheap. I used to have one where the guy cut up the original full top and worked the back hatch into the front half of the top. Looked pretty good but I wanted to be fully topless because I had my kids and they all wanted to ride in the blazer too. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

07-28-2016, 03:02 PM	#103
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Blazer half cabs I personally don't like the way these look. It reminds me of when guys try to cut a long bed down to a short bed and they don't get it right.

07-28-2016, 03:05 PM	#104
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Blazer half cabs http://sexyhalftop.com __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

11-01-2016, 12:26 PM	#106
Rickenbach Registered User Join Date: Oct 2013 Location: Grand Junction, Colorado Posts: 27	Re: Blazer half cabs No offense, but that looks like a Korean knock-off of a Blazer.

11-09-2016, 04:06 PM	#109
CMACDONALD1 Senior Member Join Date: Jun 2007 Location: Red Deer Ab Canada Posts: 756	Re: Blazer half cabs I passed on one of these at a swap meet about five years ago because the guy wanted 1800.00 for it( I thought that was a crazy price). in a way I should have jus bought it because I have been on the hunt for one ever since. I don't think they were very common up here I Canada. It would be a nice alternative to the full roof. __________________ 1966 427 biscayne with a 5 spd tremec on old school torque thrusts. 1972 Cheyenne Short Bed 1958 Apache short fleet 1980 Chevy short bed http://67-72chevytrucks.com/vboard/s...d.php?t=761005 1959 "Henry" http://67-72chevytrucks.com/vboard/s...d.php?t=670461 1966 Biscayne http://67-72chevytrucks.com/vboard/s...d.php?t=444419 1972 Suburban http://67-72chevytrucks.com/vboard/s...d.php?t=478828

11-09-2016, 05:07 PM	#110
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Blazer half cabs That soft top one don't look too bad. Definitely different though. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

02-22-2017, 06:53 AM	#115
bcdeutsch731 Registered User Join Date: Mar 2010 Location: West Chicago, IL Posts: 140	Re: Blazer half cabs I'm looking to sell my half top if anyone is interested let me know. Shoot me a text message and I'll send pics of it. Brett 630-234- seven six six six __________________ 1969 C10, 2005 LLY Duramax, Wagler Competition built motor, Bullseye Power triple Turbo's, Rossler th400, Neal Chance Racing Converter, Danville Performance tunning. 8.3@168mph 1700+ HP

03-16-2017, 06:03 PM	#118
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Blazer half cabs What was the cost range to have the bulkheads made? The one I have has some rust. Not a lot - but enough where I would ask how much to replace it.

03-16-2017, 08:49 PM	#119
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Blazer half cabs x2 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-16-2017, 09:41 PM	#120
bL.A.zer90045 Registered User Join Date: May 2012 Location: 90045 cali Posts: 568	Re: Blazer half cabs Making one for one of my 71 jimmy's out of truck cab that I have plenty of when done I'll be selling these for 2k w/bulkhead. Attached Images

03-29-2017, 11:32 PM	#122
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Blazer half cabs Here's one for sale close to me. $200 https://phoenix.craigslist.org/nph/pts/6061387732.html Attached Images

03-30-2017, 05:03 PM	#123
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 733	Re: Blazer half cabs shouldn't that have a back window? __________________ '72 K5, known as 'the Fox.'

03-30-2017, 05:26 PM	#124
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Blazer half cabs Probably a homemade one. I don't know much about them other than I don't like the way they look. LOL

03-30-2017, 05:27 PM	#125
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Blazer half cabs They chopped out the back window for the rollbar. Kinda kills it as it would need a lot more work to make it a half top again instead of just a sun roof. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.