CA Cabs Need any cuts, parts etc?!

[Sanchez Garage]

Adam, I have decided to get rid of my 68 cab. I would like to know if you have a frame, short bed, windshield, ( long shot Porterbuilt c notch) for a 63 c10 maybe we can do a trade.

[sambudo]

Originally Posted by Hard_Rain420

I need the area "both sides" along the seam of the floor and toe board. I also need both kick panels namely the lower portions where they're known to rot. I'll have to get measurements and pictures Monday.

Do you have this available on another cab/ I'm interested if you do.. how many gr8 dane pups do you have? i have one 18mo. old. thanks

[Cordless57]

Any chance you have the drivers side lower vent--you know the one with the clever little hand operated lever to allow air into the leg area of the cab?

[blazerboy72]

I need a complete passenger A pillar if you still have one

[*Gregg*]

Got my cuts today. Thanks!!

[budnikguy]

I believe I still do..let me check it out this Saturday..

Originally Posted by Youey

Attachment 1170019

Do you have this section left? Can you send me a price on it if still available

[budnikguy]

Sorry, I do not have anything really for a 60-66....just 67-72 stuff...and no go on a PB notch.

Originally Posted by Sanchez Garage

Adam, I have decided to get rid of my 68 cab. I would like to know if you have a frame, short bed, windshield, ( long shot Porterbuilt c notch) for a 63 c10 maybe we can do a trade.

[budnikguy]

Yeah, I can help with that...just get me pics and measurements. I have two Dane pups...Harley and Nova.. they are 10 month old sisters...

Adam

Originally Posted by sambudo

Do you have this available on another cab/ I'm interested if you do.. how many gr8 dane pups do you have? i have one 18mo. old. thanks

[budnikguy]

Yeah definitely, let me get one pulled and figure what shipping is...

Originally Posted by Cordless57

Any chance you have the drivers side lower vent--you know the one with the clever little hand operated lever to allow air into the leg area of the cab?

[budnikguy]

Definitely can help you there...just let me know where you would like the cuts and we can figure put cost..maybe Greyhound for best cost shipping...

Originally Posted by blazerboy72

I need a complete passenger A pillar if you still have one

[budnikguy]

Great Gregg.....hope the filled your needs! ty

Originally Posted by *Gregg*

Got my cuts today. Thanks!!

[sduckworth13]

Adam, I received my patch panel in the mail today. Looks great.

[budnikguy]

Great man, thanks much!!

Adam

Originally Posted by sduckworth13

Adam, I received my patch panel in the mail today. Looks great.

[xman]

Adam
You posted that you might be able to help with cuts on another post that i posted on
looking for patch panels for my 72 burb since they are the same on trucks
The first pic is on the drivers side bottom corner
the other two pics are on the pass side you can see the cowl to give you a round about area where it is as a reference. Also I noticed that some of the cabs have door hinges if they are good I am looking for upper/lower for both sides I am sure they are the same as trucks as well. total with shipping to 60435.
Thanks
Dave

[budnikguy]

Here are a couple of options I have for you on a passenger A pillar..let me know

Originally Posted by blazerboy72

I need a complete passenger A pillar if you still have one

[budnikguy]

Here are some pics for ya...I can help you with 'burb specific items also..I have a 71 GMC burb I am parting also...

Adam

Originally Posted by xman

Adam
You posted that you might be able to help with cuts on another post that i posted on
looking for patch panels for my 72 burb since they are the same on trucks
The first pic is on the drivers side bottom corner
the other two pics are on the pass side you can see the cowl to give you a round about area where it is as a reference. Also I noticed that some of the cabs have door hinges if they are good I am looking for upper/lower for both sides I am sure they are the same as trucks as well. total with shipping to 60435.
Thanks
Dave

[xman]

Adam
Here is the areas in white I think I am going to need cut outs of
Also if you have any good door hinges top and bottom for both sides
You mentioned you have a burb you are parting out. Do you have any picks or is there a post to refer to.
Let me know price shipped to 60435 when you get a chance.
Thanks
Dave

[budnikguy]

Here is the areas in white I think I am going to need cut outs of:

I can definitely get those cut for you...looks like you would need 1/2"-1" of the dash too?! If I am seeing things right. I would go $30 per cut plus shipping

Also if you have any good door hinges top and bottom for both sides

I have good hinges off of the 71 Burb I am parting, do you nee just the front door sor the 3rd door hinges also? LMK


You mentioned you have a burb you are parting out. Do you have any picks or is there a post to refer to. Let me know price shipped to 60435 when you get a chance.

Will have to gather everything up to figure best.most economical shipping for you!



no pic of the 72 at the moment..I will snap a few and post for you

Originally Posted by xman

Adam
Here is the areas in white I think I am going to need cut outs of
Also if you have any good door hinges top and bottom for both sides
You mentioned you have a burb you are parting out. Do you have any picks or is there a post to refer to.
Let me know price shipped to 60435 when you get a chance.
Thanks
Dave

[xman]

Sounds good to me for the cut outs around the windshield. I would say about 1/2 inch on the dash would be great just to get me that inner. dash lip as well. I would need both top and bottom hinges for just both front doors. Both rear quaters around the wheel openings on my burb are messed up too, as I also found it boogered up packed with bondo too much for my liking. Man I hate bondo junkies who fix rust by filling it in with bondo instead of fixing it right. Cuious what you might want for both whole rear quaters too just below the rear window

[budnikguy]

OK, I can make those cuts for you, $30 per cut ($60 both cuts), and the door hinges at $20 per side ($40 for both sides) I would be willing to cut the rear quarters but worry shipping on that large of an item might be high..lmk what you think. I would like payment (PayPal) before making any cuts...for obvious reasons. My PP is:
playersnmv@aol.com

then we can proceed with everything else and get a reasonable shipping rate for you.

Thanks
Adam


(

Originally Posted by xman

Sounds good to me for the cut outs around the windshield. I would say about 1/2 inch on the dash would be great just to get me that inner. dash lip as well. I would need both top and bottom hinges for just both front doors. Both rear quaters around the wheel openings on my burb are messed up too, as I also found it boogered up packed with bondo too much for my liking. Man I hate bondo junkies who fix rust by filling it in with bondo instead of fixing it right. Cuious what you might want for both whole rear quaters too just below the rear window

[xman]

I dont have paypal but if you PM me you address I will get a $100.00 bank money order out to you for the cab cuts asap. Then we can talk about the rear quarters price and shipping if that is ok

[budnikguy]

Yes that is great..PM on the way.

Adam

Originally Posted by xman

I dont have paypal but if you PM me you address I will get a $100.00 bank money order out to you for the cab cuts asap. Then we can talk about the rear quarters price and shipping if that is ok

[xman]

Adam
just FYI funds going out today for those cuts and the four front door hinges

[budnikguy]

Sounds good, thanks in advance...

Originally Posted by xman

Adam
just FYI funds going out today for those cuts and the four front door hinges

[71sierragrande]

Adam, any word on my cut? The driver rocker/cab corner. Havent heard or received anything and I sent a PM that you must not have gotten.