IL Parting out a 1970 Chevy - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**derotoreut** · 04-11-2014, 10:04 PM

Quote:

Originally Posted by derotoreut

Interested in inner grill. What is condition and price shipped to 14036? Any good pictures?

Still interested in inner grill.

72ChevySS · 04-11-2014, 10:32 PM

Payment sent via pp for ashtray, Thanks again!

1971ChevyTruck · 04-11-2014, 10:40 PM

Derot..I'll take it apart tomorrow and see what kind of shape its in

**TBONE1964** · 04-11-2014, 10:58 PM

If you still have it, how much for the gauge cluster with the blue bezel (the one in the truck) shipped to 48371

How much for the non gauge one?

Thank you,
Tom

OutlawM92 · 04-11-2014, 11:47 PM

If the cab floor is good and solid, I may just buy the whole cab.. minus whatever everyone is buying of course..

cjohnson6772 · 04-12-2014, 12:03 PM

Forgive me if I missed it in the thread but what is the rear end? I am looking for a posi unit to put in my 5 lug...

OutlawM92 · 04-12-2014, 06:58 PM

I'll go second in line for that bowtie emblem.. not sure if it's been bought yet..

kaphillips · 04-12-2014, 07:32 PM

Does it still have any rivited on factory exhaust hangers on the frame. If so pictures please. Thanks.

**derotoreut** · 04-15-2014, 12:50 PM

Quote:

Originally Posted by 1971ChevyTruck

Derot..I'll take it apart tomorrow and see what kind of shape its in

Any luck on checking out the inner grill? Keep me posted because I don't always check this thread. Thanks.

Flthead · 04-15-2014, 01:06 PM

Is the rear still available ? I need the carrier if a 3 series carrier. If you want to pull rear center carrier assembly out if automatic , it should I'm guessing be a 3.08 gears. Let me know thanks

OutlawM92 · 04-15-2014, 03:22 PM

Picked up the bench seat yesterday and put it in the old beastie, works perfectly! Thanks again! Still wondering about the cab and bowtie emblem as well..

mikeb81 · 04-15-2014, 09:43 PM

I'll take it. What would shipping be to 39565?

Quote:

Originally Posted by 1971ChevyTruck

$30 plus shipping for the wheel and the grant adapter kit

Woodnears · 04-15-2014, 10:26 PM

Are the vent windows sold?

1972cheyenne454 · 04-16-2014, 10:33 AM

What kind of shape is the passenger side fender in?

Texasbigblock · 04-16-2014, 06:09 PM

Interested in the outer grille. What would shipping be to 76691?

mtnbikerxt · 04-16-2014, 11:58 PM

Hi, I was wondering whether you had been able to ship out the drivers side lower control arm yet? Thanks

72ChevySS · 04-17-2014, 03:57 PM

Just got the ashtray, perfect. Thank you!

Rocketman72 · 04-17-2014, 11:18 PM

Quote:

Originally Posted by JimH2828

Yes, I'm interested pending price. A couple of questions below. No rush, but pics would be appreciated whenever you have time to pull everything.
1) Accelerator pedal assy with firewall plastic mount bracket, bolts, hardware
2) Driver inner fender support brace with bolts, hardware
3) Under hood service light with wire
- how does it turn on and off? some switch?
4) Ignition, door and glove locks with keys
5) Duel horns with mount bolts and connecting wire (if it's there)
- Do they both work?

Thanks
Jim

Just so you're clear, those under hood lights work on a mercury switch within the lamp assy itself. When the hood rises the mercury runs to the bottom of the lamp assy and makes the connection. There is no separate switch that activates the light.

CMH77 · 04-21-2014, 12:15 PM

Also interested in outer grill if texasbigblock passes on it. I'm in Central IL, so I can pick it up as I travel a lot for work.

**derotoreut** · 04-21-2014, 07:01 PM

Status of inner grill? Any progress? Still waiting for you to remove and check it. Thanks.

mtnbikerxt · 04-21-2014, 07:07 PM

1971ChevyTruck, I have yet to receive the lower control arm I sent payment for on April 6th. I also haven't gotten any replies to PMs. If you can, an update on the status would be greatly appreciated.

**TBONE1964** · 04-21-2014, 07:18 PM

I think 1971ChevyTruck is MIA. I have not got any response from him either. Last online on 4-16-2014

Hope all is well.

1971ChevyTruck · 04-22-2014, 07:41 AM

Sorry guys, its been crazy with work. My wife actually shipped everything out for me and even dealt with the bench seat when he picked it up. mtnbik I will check on the lower control arm today.

cmabolt · 04-22-2014, 01:35 PM

How much for door glass on both sides with channels to 21108?
What condition is the glass in? Chips? Scratches?
Thanks chris

*low&slow* · 04-22-2014, 01:56 PM

Quote:

Originally Posted by TBONE1964

If you still have it, how much for the gauge cluster with the blue bezel (the one in the truck) shipped to 48371

How much for the non gauge one?

Thank you,
Tom

Don't think TBONE1964 has got an answer on prices yet, so that means I'm second for the blue bezel cluster w/out the gauges shipped to 83634?

04-11-2014, 10:32 PM	#102
72ChevySS Registered User Join Date: Jun 2011 Location: Rio Rancho, NM Posts: 47	Re: Parting out a 1970 Chevy Payment sent via pp for ashtray, Thanks again! __________________ Jonathan

04-11-2014, 10:40 PM	#103
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1970 Chevy Derot..I'll take it apart tomorrow and see what kind of shape its in

04-11-2014, 10:58 PM	#104
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,262	Re: Parting out a 1970 Chevy If you still have it, how much for the gauge cluster with the blue bezel (the one in the truck) shipped to 48371 How much for the non gauge one? Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

04-11-2014, 11:47 PM	#105
OutlawM92 Registered User Join Date: Aug 2013 Location: Clinton, IA Posts: 321	Re: Parting out a 1970 Chevy If the cab floor is good and solid, I may just buy the whole cab.. minus whatever everyone is buying of course.. __________________ 1969 C10 "Problem Child" 1981 C20 CCLB "Nightrain" "A good plan violently executed right now is far better than a perfect plan executed next week. Accept the challenges, so that you may feel the exhilaration of victory."

04-12-2014, 12:03 PM	#106
cjohnson6772 Registered User Join Date: Dec 2010 Location: NC Posts: 666	Re: Parting out a 1970 Chevy Forgive me if I missed it in the thread but what is the rear end? I am looking for a posi unit to put in my 5 lug...

04-12-2014, 06:58 PM	#107
OutlawM92 Registered User Join Date: Aug 2013 Location: Clinton, IA Posts: 321	Re: Parting out a 1970 Chevy I'll go second in line for that bowtie emblem.. not sure if it's been bought yet.. __________________ 1969 C10 "Problem Child" 1981 C20 CCLB "Nightrain" "A good plan violently executed right now is far better than a perfect plan executed next week. Accept the challenges, so that you may feel the exhilaration of victory."

04-12-2014, 07:32 PM	#108
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: Parting out a 1970 Chevy Does it still have any rivited on factory exhaust hangers on the frame. If so pictures please. Thanks.

04-15-2014, 01:06 PM	#110
Flthead Registered User Join Date: Nov 2013 Location: South jersey 51st state Posts: 138	Re: Parting out a 1970 Chevy Is the rear still available ? I need the carrier if a 3 series carrier. If you want to pull rear center carrier assembly out if automatic , it should I'm guessing be a 3.08 gears. Let me know thanks

04-15-2014, 03:22 PM	#111
OutlawM92 Registered User Join Date: Aug 2013 Location: Clinton, IA Posts: 321	Re: Parting out a 1970 Chevy Picked up the bench seat yesterday and put it in the old beastie, works perfectly! Thanks again! Still wondering about the cab and bowtie emblem as well.. __________________ 1969 C10 "Problem Child" 1981 C20 CCLB "Nightrain" "A good plan violently executed right now is far better than a perfect plan executed next week. Accept the challenges, so that you may feel the exhilaration of victory."

04-15-2014, 10:26 PM	#113
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 618	Re: Parting out a 1970 Chevy Are the vent windows sold?

04-16-2014, 10:33 AM	#114
1972cheyenne454 Registered User Join Date: Mar 2013 Location: Middle-a-nowhere, USA Posts: 63	Re: Parting out a 1970 Chevy What kind of shape is the passenger side fender in? __________________ 1972 Cheyenne, 350/th350 12bolt posi, shift kit, 262 Craine Cam, Pertronix HEI. "When the power of love overcomes the love of power, only then will the world know peace." "Who are you people and where is my horse?"

04-16-2014, 06:09 PM	#115
Texasbigblock Registered User Join Date: Mar 2007 Location: Texas Posts: 252	Re: Parting out a 1970 Chevy Interested in the outer grille. What would shipping be to 76691? __________________ -Scott- 1970 C10 shortbed 396 1969 C30 dually flatbed "Vidalia"

04-16-2014, 11:58 PM	#116
mtnbikerxt Registered User Join Date: Oct 2013 Location: Cheshire, CT Posts: 39	Re: Parting out a 1970 Chevy Hi, I was wondering whether you had been able to ship out the drivers side lower control arm yet? Thanks

04-17-2014, 03:57 PM	#117
72ChevySS Registered User Join Date: Jun 2011 Location: Rio Rancho, NM Posts: 47	Re: Parting out a 1970 Chevy Just got the ashtray, perfect. Thank you! __________________ Jonathan

04-21-2014, 12:15 PM	#119
CMH77 Registered User Join Date: Sep 2012 Location: Springfield, IL Posts: 71	Re: Parting out a 1970 Chevy Also interested in outer grill if texasbigblock passes on it. I'm in Central IL, so I can pick it up as I travel a lot for work.



Register or Log In To remove these advertisements.

04-21-2014, 07:01 PM	#120
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: Parting out a 1970 Chevy Status of inner grill? Any progress? Still waiting for you to remove and check it. Thanks. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

04-21-2014, 07:07 PM	#121
mtnbikerxt Registered User Join Date: Oct 2013 Location: Cheshire, CT Posts: 39	Re: Parting out a 1970 Chevy 1971ChevyTruck, I have yet to receive the lower control arm I sent payment for on April 6th. I also haven't gotten any replies to PMs. If you can, an update on the status would be greatly appreciated.

04-21-2014, 07:18 PM	#122
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,262	Re: Parting out a 1970 Chevy I think 1971ChevyTruck is MIA. I have not got any response from him either. Last online on 4-16-2014 Hope all is well. __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

04-22-2014, 07:41 AM	#123
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Parting out a 1970 Chevy Sorry guys, its been crazy with work. My wife actually shipped everything out for me and even dealt with the bench seat when he picked it up. mtnbik I will check on the lower control arm today.

04-22-2014, 01:35 PM	#124
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: Parting out a 1970 Chevy How much for door glass on both sides with channels to 21108? What condition is the glass in? Chips? Scratches? Thanks chris __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!

Register or Log In To remove these advertisements.