OR Parting 1972 C20

[c20pickup]

Thanks what gear set? 4.11? No hurry

[DLTruck1973]

Originally Posted by c20pickup

Thanks what gear set? 4.11? No hurry

I do have a very nice "no spin" with a 4:11 gear for $400.00 plus shipping. We would ship this in a small wood crate to make sure it gets to you safely. If interested I can get you a shipping quote with your zip code.

Thank you,
Thomas

[Minnz]

Thomas,

I am looking for an ignition switch and spacer for my 72 Blazer. Mine is pretty much destroyed after I removed it. A set-up with the ignition cylinder and an original GM key would be better yet.

Also, did you ever sell those black door panels?

Thanks,
Lee

[DLTruck1973]

Originally Posted by Minnz

Thomas,

I am looking for an ignition switch and spacer for my 72 Blazer. Mine is pretty much destroyed after I removed it. A set-up with the ignition cylinder and an original GM key would be better yet.

Also, did you ever sell those black door panels?

Thanks,
Lee

Hi Lee,

I will take a look and see what we have for the ignition switch/tumbler and key for you.

The door panels sold but I may have another set for sale soon.

I will get back with you,
Thank you,
Thomas

[72kool]

have you had a chance to get a picture of those hubcaps yet? sorry to rush you, havnt had much luck finding any for 4 years haha

[DLTruck1973]

Originally Posted by 72kool

have you had a chance to get a picture of those hubcaps yet? sorry to rush you, havnt had much luck finding any for 4 years haha

I am trying to get to it but have been super busy.

I will make a point to work on it.

Thank you,
Thomas

[doo142]

I'm looking for a nice engine wire harness, 3/4 ton hub caps for 4x4 driver cond. , I may do a headlight and tail light harness also, if available in nice cond. ,

[DLTruck1973]

Originally Posted by doo142

I'm looking for a nice engine wire harness, 3/4 ton hub caps for 4x4 driver cond. , I may do a headlight and tail light harness also, if available in nice cond. ,

Very sorry for the late response. I have been super busy.

Nothing on the 4x4 caps at this time. I might have a engine harness but most of the ones I do have have had or need repairs on the starter ends. Are you running HEI? If so, you will not need the yellow wire.

Tail light harnesses are very hard to find without spliced wires. Front light harness should not be a problem. Can you give me the year and engine / trans combo you need the wiring harnesses for.

Thank you,
Thomas

[shawno72]

Hello, by chance do you have any medium olive radio delete plates?

[DLTruck1973]

Originally Posted by shawno72

Hello, by chance do you have any medium olive radio delete plates?

Not at this time. They go as fast as I get them. Have you tried lowlife99? Keith collects them and may steer you in the right direction.

Thank you for the interest,
Thomas

[shawno72]

Originally Posted by DLTruck1973

Not at this time. They go as fast as I get them. Have you tried lowlife99? Keith collects them and may steer you in the right direction.

Thank you for the interest,
Thomas

Yes I tried Keith, no luck. Thank you.

[bronze 72 super]

Tom, do you have a nice set of rear window trim for a '71 Cheyenne with a sliding window? If so shipping will be to 97050, Rufus Oregon. Thanks Mike.

[DLTruck1973]

Originally Posted by bronze 72 super

Tom, do you have a nice set of rear window trim for a '71 Cheyenne with a sliding window? If so shipping will be to 97050, Rufus Oregon. Thanks Mike.

I do have a very nice set of stainless trim for the back window. One very small ding on the lower piece. No other dings, dents or scuffs. These pieces will polish up nice.

$50.00 plus $25.71 to ship so $75.71 total.

Let me know if interested
Thank you,
Thomas

[72kool]

i know you are busy and i understand. just wanted to check up on the gmc hubcaps

[c20pickup]

Originally Posted by DLTruck1973

I do have a very nice "no spin" with a 4:11 gear for $400.00 plus shipping. We would ship this in a small wood crate to make sure it gets to you safely. If interested I can get you a shipping quote with your zip code.

Thank you,
Thomas

Sorry for the delay, i think i would just want the no spin unit itself just for shipping purposes

[DLTruck1973]

Originally Posted by bronze 72 super

Tom, do you have a nice set of rear window trim for a '71 Cheyenne with a sliding window? If so shipping will be to 97050, Rufus Oregon. Thanks Mike.

Hi Mike,

I thought I answered you but maybe not. I have a very nice set for a rear window trim. It has a very small ding on the lower piece but no other dents, dings or scuffs. Would look nice with a polish.

I can get it to you for $50.00 plus $25.00 for shipping.

Let me know,

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by 72kool

i know you are busy and i understand. just wanted to check up on the gmc hubcaps

OK, the best I can get you now is a set from a 1973 and up. You would have to reverse the center to make them work on a stock rear end.

I was in the middle of repainting these to sell as a complete set but I have been so busy there has been no time in my day to finish them.

I would still need $225.00 for them if interest. I do not have one here to send a photo of but we could arrange it if interested. That would be the only set of GMC caps I have currently.

Let me know and thank you for you patients,
Thomas

[DLTruck1973]

Originally Posted by c20pickup

Sorry for the delay, i think i would just want the no spin unit itself just for shipping purposes

The price I quoted you of $400.00 is just for the 3rd member with "no spin" and 4:10 gears. It would be shipped to you in a wood box to insure it gets to you OK.

If you are interested, I can get you a shipping quote with your zip code.

Thank you,
Thomas

[c20pickup]

Originally Posted by DLTruck1973

The price I quoted you of $400.00 is just for the 3rd member with "no spin" and 4:10 gears. It would be shipped to you in a wood box to insure it gets to you OK.

If you are interested, I can get you a shipping quote with your zip code.

Thank you,
Thomas

im just looking for the no spin unit itself without the gearset or thrid member, i have the 4;10 gears in my truck alreayd just need the locker now. i can understand if you dont want to split them up

[DLTruck1973]

Originally Posted by c20pickup

im just looking for the no spin unit itself without the gearset or thrid member, i have the 4;10 gears in my truck alreayd just need the locker now. i can understand if you dont want to split them up

Yes, sorry but I do not want to split it up. I have good local sales on these as a whole third member.

Thank you for the interest,
Thomas

[wiggins]

I am looking for a nice(no Rust) set of 72' doors for my Blazer. Do you have any? truck or blazer

[DLTruck1973]

Originally Posted by wiggins

I am looking for a nice(no Rust) set of 72' doors for my Blazer. Do you have any? truck or blazer

Do they have to be 72 doors? Are you concerned with speaker holes? Shipping is usually a deal breaker on sheet metal. Last time I quoted a fender to MN it was $150.00.

Let me know and I will see what we have.

Thank you for the interest,
Thomas

[wiggins]

yea they need to be 72's, no rust , no holes pls sir. ever shipped Greyhound?

[DLTruck1973]

Originally Posted by wiggins

yea they need to be 72's, no rust , no holes pls sir. ever shipped Greyhound?

I am not going to be able to help you on that one.

Thank you for the interest,
Thomas

[newstedcomeback]

Hello, I am looking for an engine side heater box. that is the last piece to my puzzle. I only need the box and hardware. (all screws for the fan, heater core and mounting on the firewall.) I already have everything for the inside and I have a new heater core and fan. could you please let me know the cost including shipping to Santa Rosa ca, zip code 95401. Thank you! -Joe