KS Parting a 72 chevy C20 highlander with AC - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 02-25-2015, 06:21 PM

Dave, I'd rather sell it complete sorry. Thanks Randy

teeitup · 02-25-2015, 06:26 PM

72 Blue

teeitup · 02-25-2015, 06:26 PM

and door panels I have

teeitup · 02-25-2015, 06:28 PM

1972 Jimmy, Eric, no other antennas, I have nozzles for sure, and here is a better pic of worn area

teeitup · 02-25-2015, 06:30 PM

4x4GMC1972, I have 3 carbs and 2 intakes.
carb numbers
7043250
7041208
7028212
intake on this 72 6263761
I have a intake on a 71 I just hauled in too

teeitup · 02-25-2015, 06:32 PM

Jake 1971, Paul this is the only door panel I have

teeitup · 02-25-2015, 06:34 PM

CurtB1971, sorry the other truck I hauled in has a bad vent on pass side. It has this lighter though. So this one or choice of the one I posted pic of earlier in thread

teeitup · 02-25-2015, 06:41 PM

Hotrodsbychip

1972 Jimmy · 02-25-2015, 07:25 PM

Quote:

Originally Posted by teeitup

1972 Jimmy, Eric, no other antennas, I have nozzles for sure, and here is a better pic of worn area

Looks good enough from here! Send me a PM on what the total cost will be.
Thanks again,
Eric

Old362 · 02-25-2015, 07:35 PM

Randy I will take the starter harness based on condition, and if 72 Blue passes on the 71 bumper i would take it or at least be in line thank you Gary

Jake1971 · 02-25-2015, 08:35 PM

Quote:

Originally Posted by teeitup

Jake 1971, Paul this is the only door panel I have

Hey Randy, this one is a lot better than mine; I will take it. Add this driver's side door panel to my pile and LMK total to 78602

72 blue · 02-25-2015, 08:52 PM

Quote:

Originally Posted by teeitup

and door panels I have

Randy, that's the bumper ! Let me know how much for door panels, I like all the other parts, latch, small bracket, trim piece, heat control panel..... I also need a left lower molding that mounts on the cab in black....my truck doesn't have air and I want to add air,,,,,does that under dash unit work? Put me in line for that and whatever else I need to convert.....I still need a grill ! I understand about shipping one.......send me price for all what I need with shipping .....I'm guessing I like plain door panels best........and please price me the ac unit and what else I need.....my alternator is mounted drivers side......

Thanks so much Randy !

Rick

**4X4GMC1972** · 02-25-2015, 10:18 PM

Randy, Can you price the intake and hardware shipped to 75227? Thanks! Todd

**Curtb1971** · 02-25-2015, 10:20 PM

Quote:

Originally Posted by teeitup

CurtB1971, sorry the other truck I hauled in has a bad vent on pass side. It has this lighter though. So this one or choice of the one I posted pic of earlier in thread

Hey Randy,
I'll take whatever cig is the nicer one in your opinion, I don't need the harness as I mentioned earlier, just the lighter and assembly. If you have a non rusted driver kick panel throw that in the pile, I'm replacing the gaskets so gasket condition doesn't matter. PM me a total and I'll get you squared up.
Thanks again

Curt

HOTRODSBYCHIP · 02-25-2015, 10:37 PM

Quote:

Originally Posted by teeitup

Hotrodsbychip

Do you have one in better condition like the other one?

nobolt · 02-26-2015, 07:57 AM

thanks Randy, but i'll pass on the cluster

teeitup · 02-26-2015, 09:04 AM

Eric, I should have total later today

Gary, if harness is good it is yours

Paul, ok so we have the door panel and the pair of horns so far? And if I can get the firewall pads off in good condition

Rick, this bumper is $50 without lights, its straight and needs cleaned up. I don't have a good piece for the drivers cab right now. Heater control is $50. Plain door panels are $25. I have no idea on Ac working condition. For everything with this add on air including parts under hood. $100. $20 for the other small parts I got pics for you of. All plus shipping. The 71 will be a week or so out on parting unfortunately

Todd, for intake and hardware $25 plus shipping

Curt, I'm thinking the lighter in green one is best, I'll look again on drivers side vent

hotrodsbychip, this is the only other one I have, it just needs cleaned up

nobolt, no problem

Thanks Randy

72 blue · 02-26-2015, 03:03 PM

Rick, this bumper is $50 without lights, its straight and needs cleaned up. I don't have a good piece for the drivers cab right now. Heater control is $50. Plain door panels are $25. I have no idea on Ac working condition. For everything with this add on air including parts under hood. $100. $20 for the other small parts I got pics for you of. All plus shipping. The 71 will be a week or so out on parting unfortunately

Randy, Sounds good ! I want everything .....I'm in no rush, take your time just don't forget what I want .....Let me know about shipping ! Please keep your eyes open for the trim for left side of cab ....

In YHO do you think this ac unit could/would work?

Thanks,

Rick Jackson
Pell City AL
35125

teeitup · 02-26-2015, 05:40 PM

Rick, all these parts are yours. On the AC, I have no idea, the previous owner said the truck was running when he parked it, but its been sitting a few years. Thanks Randy

teeitup · 02-26-2015, 05:56 PM

Clemsonteg

**4X4GMC1972** · 02-26-2015, 06:50 PM

Randy, I will take the intake. If you have other Hardware that you can let go with it I would appreciate it. Let me know the total with shipping and I will Paypal the payment.
Thanks,
Todd

clemsonteg · 02-26-2015, 07:41 PM

Thanks for the pic. Looks like you have to water pump pulley I need, but not the crank pulley. What are you asking for the water pump pulley? You don't happen to have a part number on the water pump pulley so I can find the correct crank pulley do you?

Jake1971 · 02-26-2015, 08:07 PM

Quote:

Originally Posted by teeitup

Paul, ok so we have the steel door panel and the pair of horns so far? And if I can get the firewall pads off in good condition
Thanks Randy

Hey Randy, I also looking for three '68-'72 rear tail light harnesses in decent condition (hopefully unmolested) (the ones that go from the crossmember to the lights) and black rubber mat. Does the new arrival '71 have blue carpet? If so and in usable condition I will take it.
Thanks again!

Edit: also looking for a center seat belt pair, hoping for light blue to match for my '71 c10.

teeitup · 02-27-2015, 08:49 AM

Todd, I will try to get it off this weekend and get you a quote

clemsoneteg, sorry not spitting up the set. I'll see if it has a part number on it

Paul, not sure what color the mat/carpet is on this other truck, I know it has green interior

Thanks Randy

teeitup · 02-27-2015, 06:27 PM

I'll have a few pics later tonight of some parts. Off to my boys belated birthday party. Thanks Randy

02-25-2015, 06:21 PM	#101
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC Dave, I'd rather sell it complete sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2015, 06:26 PM	#102
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC 72 Blue Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2015, 06:26 PM	#103
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC and door panels I have Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2015, 06:28 PM	#104
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC 1972 Jimmy, Eric, no other antennas, I have nozzles for sure, and here is a better pic of worn area Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2015, 06:30 PM	#105
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC 4x4GMC1972, I have 3 carbs and 2 intakes. carb numbers 7043250 7041208 7028212 intake on this 72 6263761 I have a intake on a 71 I just hauled in too Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2015, 06:32 PM	#106
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC Jake 1971, Paul this is the only door panel I have Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2015, 06:34 PM	#107
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC CurtB1971, sorry the other truck I hauled in has a bad vent on pass side. It has this lighter though. So this one or choice of the one I posted pic of earlier in thread Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2015, 06:41 PM	#108
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC Hotrodsbychip Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2015, 07:35 PM	#110
Old362 Registered User Join Date: Jan 2015 Location: Winfield. Kansas Posts: 51	Re: Parting a 72 chevy C20 highlander with AC Randy I will take the starter harness based on condition, and if 72 Blue passes on the 71 bumper i would take it or at least be in line thank you Gary

02-25-2015, 10:18 PM	#113
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting a 72 chevy C20 highlander with AC Randy, Can you price the intake and hardware shipped to 75227? Thanks! Todd __________________ 1978 Dodge Omni

02-26-2015, 07:57 AM	#116
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Parting a 72 chevy C20 highlander with AC thanks Randy, but i'll pass on the cluster __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

02-26-2015, 09:04 AM	#117
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC Eric, I should have total later today Gary, if harness is good it is yours Paul, ok so we have the door panel and the pair of horns so far? And if I can get the firewall pads off in good condition Rick, this bumper is $50 without lights, its straight and needs cleaned up. I don't have a good piece for the drivers cab right now. Heater control is $50. Plain door panels are $25. I have no idea on Ac working condition. For everything with this add on air including parts under hood. $100. $20 for the other small parts I got pics for you of. All plus shipping. The 71 will be a week or so out on parting unfortunately Todd, for intake and hardware $25 plus shipping Curt, I'm thinking the lighter in green one is best, I'll look again on drivers side vent hotrodsbychip, this is the only other one I have, it just needs cleaned up nobolt, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-26-2015, 03:03 PM	#118
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting a 72 chevy C20 highlander with AC Rick, this bumper is $50 without lights, its straight and needs cleaned up. I don't have a good piece for the drivers cab right now. Heater control is $50. Plain door panels are $25. I have no idea on Ac working condition. For everything with this add on air including parts under hood. $100. $20 for the other small parts I got pics for you of. All plus shipping. The 71 will be a week or so out on parting unfortunately Randy, Sounds good ! I want everything .....I'm in no rush, take your time just don't forget what I want .....Let me know about shipping ! Please keep your eyes open for the trim for left side of cab .... In YHO do you think this ac unit could/would work? Thanks, Rick Jackson Pell City AL 35125

02-26-2015, 05:40 PM	#119
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC Rick, all these parts are yours. On the AC, I have no idea, the previous owner said the truck was running when he parked it, but its been sitting a few years. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-26-2015, 05:56 PM	#120
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC Clemsonteg Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-26-2015, 06:50 PM	#121
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting a 72 chevy C20 highlander with AC Randy, I will take the intake. If you have other Hardware that you can let go with it I would appreciate it. Let me know the total with shipping and I will Paypal the payment. Thanks, Todd __________________ 1978 Dodge Omni

02-26-2015, 07:41 PM	#122
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Re: Parting a 72 chevy C20 highlander with AC Thanks for the pic. Looks like you have to water pump pulley I need, but not the crank pulley. What are you asking for the water pump pulley? You don't happen to have a part number on the water pump pulley so I can find the correct crank pulley do you?

02-27-2015, 08:49 AM	#124
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC Todd, I will try to get it off this weekend and get you a quote clemsoneteg, sorry not spitting up the set. I'll see if it has a part number on it Paul, not sure what color the mat/carpet is on this other truck, I know it has green interior Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-27-2015, 06:27 PM	#125
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 highlander with AC I'll have a few pics later tonight of some parts. Off to my boys belated birthday party. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.