KS Parting 1970 CST truck with buckets

[snipescastle2]

Mike,
I'm looking for a tail gate band that is black and not wood grain. If I have to repainted it, so be it. Can you keep me in mind for one of those as well as a decent grill surround? Thanks!
Ben
P.s. It's been pouring here in Cancun since we got off the plane, it finally stopped two hours ago, hoping the weather will cooperate the rest of our trip😒

[mjgord51]

I will pass on the ash tray your last pics was showing 71/72 trays, I have a 68. And still waiting for pics on the heater control panel. mjgord51

[72okcdroppinlow]

Do you have the complete grill with brackets would like to purchase if you do shipped to 73109

[justinl6050]

Do you have a brake pedal support sleeve?

[Krex]

can i have pics of the white trucks running lights on top of the cab?

[In The Ten Ring]

How much for the cigarette lighter and bezel that goes around it?

[mjgord51]

Originally Posted by mjgord51

I will pass on the ash tray your last pics was showing 71/72 trays, I have a 68. And still waiting for pics on the heater control panel. mjgord51

My mistake on what I really needed, yes a ball brg tray would be the right one needed for my 68. I got wind of an old abounded 68 GMC, I now have that ash tray. sorry for the confusion at first, any heater control panel with tight mounted lever assembly & arms. Marvin

[Cash3481]

Hey guys, sorry for the slow responses as I'm working out of town.

Originally Posted by 72okcdroppinlow

Do you have the complete grill with brackets would like to purchase if you do shipped to 73109

I do not have another 70 grill but I have a ton of grill supports.

Originally Posted by justinl6050

Do you have a brake pedal support sleeve?

I have several brake pedals but I won't be back in town until the 4th.

Originally Posted by Krex

can i have pics of the white trucks running lights on top of the cab?

I'll load them in a minute...

Originally Posted by In The Ten Ring

How much for the cigarette lighter and bezel that goes around it?

I have a bunch of lighters... I'll see if there is a pic on my phone.

Originally Posted by mjgord51

My mistake on what I really needed, yes a ball brg tray would be the right one needed for my 68. I got wind of an old abounded 68 GMC, I now have that ash tray. sorry for the confusion at first, any heater control panel with tight mounted lever assembly & arms. Marvin

No good heater controls, sorry.

[Cash3481]

Here's a pic of the lights.

[Cash3481]

Another pic

[Cash3481]

Last pic of the lights

[MidLifer]

looking for the following if you have:

Auto non-tilt column (any color fine)
Auto crossmember
Low hump cut out of a cab

Got any/all of these?

[Krex]

Mirrors to 75023

[Cash3481]

Originally Posted by MidLifer

looking for the following if you have:

Auto non-tilt column (any color fine)
Auto crossmember
Low hump cut out of a cab

Got any/all of these?

I have all of them. I can try to get a good picture for you this weekend.
$35 for the crossmember
$45 for the column
$50 for the low hump cutout.

[Krex]

Also thank you for the light pics. What are you asked for the set and the wiring harness to 75023

[JustinGJ]

Looking for some long box lower trim, both rear pieces behind the rear wheels. Also need left front fender lower front piece, tucked in next to bumper. All with black paint please, they do not need to be nice, can have dings. Going on a patina truck, '71 C20. Also looking for a pass side tail light trim and both left and right upper tailgate chrome strips, same story, do not have to be perfect at all, slightly better than scrap would match the truck fine. Thanks in advance!

[Cash3481]

Originally Posted by Krex

Also thank you for the light pics. What are you asked for the set and the wiring harness to 75023

Im sure they will fit in a medium FRB how about $30 shipped. Ill need to get it pulled and ready to ship this weekend if your interested.

Originally Posted by JustinGJ

Looking for some long box lower trim, both rear pieces behind the rear wheels. Also need left front fender lower front piece, tucked in next to bumper. All with black paint please, they do not need to be nice, can have dings. Going on a patina truck, '71 C20. Also looking for a pass side tail light trim and both left and right upper tailgate chrome strips, same story, do not have to be perfect at all, slightly better than scrap would match the truck fine. Thanks in advance!

Ill see whats out there and get you a picture.

[TurboJ]

Originally Posted by Cash3481

I have this truck almost parted out. Prices listed are plus shipping unless noted.
3 piece Bucket seat cab braces... $sold
Roof is sold
Front fenders are $100 a piece
Core support no rust under battery box $100
Hood $75
Bucket seat carpet retainers $sold
Doors are sold
Bed is in good shape w/wood floor (wood is gone though). $300 including the tailgate
Bed strips sold!
Let me now if there is anything else you need.
I'll post more pics tomorrow

Do you still have the bed? And how far from TULSA ok are you?
Posted via Mobile Device

[MidLifer]

Great, thanks. Looking forward to the pics. Also would like the shift linkage for the column if you have it.

[Cash3481]

Originally Posted by TurboJ

Do you still have the bed? And how far from TULSA ok are you?
Posted via Mobile Device

Bed was sold to a local farmer... Sorry!

[Cash3481]

Pic of an at crossmember for midlife.

[Cash3481]

Column pic.
I'll get a pic of a floor I have this weekend.
If your wanting that floor. I'll do $40 for it. I can pack all this up this weekend.
The column and crossmember would ship together. The floor will go separate.

[MidLifer]

Interested in the column and crossmember. A shift linkage for the column too if you have one. And of course when you get around to it, the floor patch for the low hump for a truck I'm converting from manual to auto.

Price shipped to 08057? If significantly cheaper to a business address use zip 08648.

[Cash3481]

Originally Posted by MidLifer

Interested in the column and crossmember. A shift linkage for the column too if you have one. And of course when you get around to it, the floor patch for the low hump for a truck I'm converting from manual to auto.

Price shipped to 08057? If significantly cheaper to a business address use zip 08648.

Seems like a lot of work to weld in a low hump, unless you want it perfectly stock. You could just bolt in a BB automatic high hump and be done with it. Just a thought. I get:
$100 for a bb high hump
$35 for the crossmember
$45 for the column
$40 for the low hump cutout
I'll only charge you actual shipping cost and whichever way is cheapest I'll send it wrapped safely. I can't get shipping quotes till Saturday when I get home.
Till then...
Mike

[JustinGJ]

Hi Mike, just wondering if you had gotten a chance to check on those lower mouldings at all?

Thanks again.

Originally Posted by JustinGJ

Looking for some long box lower trim, both rear pieces behind the rear wheels. Also need left front fender lower front piece, tucked in next to bumper. All with black paint please, they do not need to be nice, can have dings. Going on a patina truck, '71 C20. Also looking for a pass side tail light trim and both left and right upper tailgate chrome strips, same story, do not have to be perfect at all, slightly better than scrap would match the truck fine. Thanks in advance!