55.2-59 Who Sells This Under Dash Valence? - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MD2020 · 10-06-2022, 09:11 AM

I tried to order one this morning from No Limit, "product not available"

HELP

Anybody have one they did not use??

_Ogre · 10-06-2022, 01:34 PM

4 tabs welded under the dash. you can also see the original fascia i had bent up to the left of the column. at this point i was building the center console, the dash is taped and waxed in the center. by the time i had the center console roughed in, i knew the plain jane fascia wouldn't cut it. plus the column cover was needed

MD2020 · 10-06-2022, 06:39 PM

I'm going to make mine out of steel.

I will mark lines every 1/2" for the upper part and every 1/4" for the lower part.
Set up a break with a stop and start bending
making the corners will take several pieces with pie cuts and lots of time.

62 Barnfind · 06-09-2025, 08:27 PM

I found someone who custom makes these for the 55-59. Message me if you want the email address.

10-06-2022, 09:11 AM	#1
MD2020 Registered User Join Date: Sep 2018 Location: Batesville,MISSISSIPPI Posts: 317	Re: Who Sells This Under Dash Valence? I tried to order one this morning from No Limit, "product not available" HELP Anybody have one they did not use?? Last edited by MD2020; 10-06-2022 at 09:24 AM.

10-06-2022, 01:34 PM	#2
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Who Sells This Under Dash Valence? 4 tabs welded under the dash. you can also see the original fascia i had bent up to the left of the column. at this point i was building the center console, the dash is taped and waxed in the center. by the time i had the center console roughed in, i knew the plain jane fascia wouldn't cut it. plus the column cover was needed Attached Images __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

10-06-2022, 06:39 PM	#3
MD2020 Registered User Join Date: Sep 2018 Location: Batesville,MISSISSIPPI Posts: 317	Re: Who Sells This Under Dash Valence? I'm going to make mine out of steel. I will mark lines every 1/2" for the upper part and every 1/4" for the lower part. Set up a break with a stop and start bending making the corners will take several pieces with pie cuts and lots of time. Attached Images

06-09-2025, 08:27 PM	#4
62 Barnfind Registered User Join Date: Jan 2012 Location: Salado, Tx Posts: 1,405	Re: Who Sells This Under Dash Valence? I found someone who custom makes these for the 55-59. Message me if you want the email address. Attached Images __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.