What did you do today not on your truck...

[Boog]

The wife and I spent the weekend in south La visiting our daughter. We were in the Yukon. Yesterday the trans shifter cable popped off the gear lever on the trans and I used some zip ties to get our daughters home. I went to O'Reillys and picked up a new bushing/keeper for it and installed it this morning before heading out coming home. Just over half way home we stopped for gas and food and it popped off again leaving the truck in neutral. I pushed it away from the fuel pump and slid under it to try to zip tie it again but it was too freakin hot to touch so I know they wouldn't stay on long. So I did what any gear head worth his salt would do and grabbed a clothes hanger and cut a piece to wrap around the deal to get us home. I don't carry bailing wire. but the coat hanger got us home. I'll make a better fix tomorrow when the thing has fully cooled off.

[DeadheadNM]

Planted a walnut tree.

[1976gmc20]

I didn't have anything to do with this but I thought it was a nice picture:

[special-K]

We took my mom to Summit Hotel in PA for lunch on her 91st birthday. I never went there before. It's along US40/Old National Pike and is very historic. Has a great view to the west, but you can look back to the mountains to the east as well. built 1907

[Gregski]

tested our marriage (yet again) decided to strip and paint our lovely oak kitchen cabinets white for the ol' lady

[Ol Blue K20]

Didn't work on Ol Blue but on the daily driver. It needed a fuel pump and I hate dropping the tank. So I got creative. It was a lot easier...

[67C10Step]

Ol Blue,
I did that same trick last November replacing the rubber fuel filler from the tank to the filler in the bed side on a 1991 model. It wasn't my favorite day for sure.

[Ol Blue K20]

Originally Posted by 67C10Step

Ol Blue,
I did that same trick last November replacing the rubber fuel filler from the tank to the filler in the bed side on a 1991 model. It wasn't my favorite day for sure.

It was a lot easier than dropping the half full tank. I used my engine hoist to move the bed. It took less than 4 hours including cold snack breaks...

[72c20customcamper]

Went to DMV to turn in the plates plates from my Chevelle and transfer plates from the Avanti to it ,the Chevelle has been in the garage for 3 years unused and the plates expired . Tried to renew online but NY has a law that if the registration is expired over a year you cant renew them. And to top it off they have a drop box in the lobby you can only do certain transactions in person with an appointment. Which does not include registrations and plate surrenders

So I walk in only about a handful of people , I asked the info clerk questions about if I had to turn in the plates and wait for the receipt before I could transfer the plates. She say wait one moment goes an talks to another clerk waves me up to the counter and she did everything right on the spot . A pleasurable experience at DMV is rare

[4u2nv]

Originally Posted by Gregski

tested our marriage (yet again) decided to strip and paint our lovely oak kitchen cabinets white for the ol' lady

Sooo you and the old lady got naked and painted cabinets , does it help a marriage.

[FleetsidePaul]

Originally Posted by 4u2nv

Sooo you and the old lady got naked and painted cabinets , does it help a marriage.

Couldn't hurt. I'd be down for that. And I don't even like painting.

[4u2nv]

Originally Posted by FleetsidePaul

Couldn't hurt. I'd be down for that. And I don't even like painting.

I think the body painting thing may be fun , never done that .

[67ChevyRedneck]

Originally Posted by Ol Blue K20

Didn't work on Ol Blue but on the daily driver. It needed a fuel pump and I hate dropping the tank. So I got creative. It was a lot easier...

I'd read they tend to fail around 120K (on average) on my 2000 Z71 is was like 119,600 or so

I dropped mine with 1/4 tank of gas. Not a fun job.

I was lucky, mine gave me warnings. It did the "hard start" issue where the check valve fails? so there's no initial pressure for start up.

[Ol Blue K20]

Originally Posted by 67ChevyRedneck

I'd read they tend to fail around 120K (on average) on my 2000 Z71 is was like 119,600 or so

I dropped mine with 1/4 tank of gas. Not a fun job.

I was lucky, mine gave me warnings. It did the "hard start" issue where the check valve fails? so there's no initial pressure for start up.

Mine wouldn't pull a long uphill grade. It would start misfiring. Runs great now!

[67ChevyRedneck]

Nice! For the most part, they're actually really good fuel pumps... just a total PIA to replace. I've seen on the 3rd and 4th gen camaro/birds they're so difficult to remove the tank people cut holes in the floor and add a panel back over it.

[Ol Blue K20]

Originally Posted by 67ChevyRedneck

Nice! For the most part, they're actually really good fuel pumps... just a total PIA to replace. I've seen on the 3rd and 4th gen camaro/birds they're so difficult to remove the tank people cut holes in the floor and add a panel back over it.

I thought about an access hole. But I decided that I had a better idea....

[Rich84]

So technically it's not "on" the truck.
I assembled a new bed cover from Craftec for my stepside. The frame went together quite easily. Getting the cover on the frame was a whole different ballgame. I had to enlist the help of my wife and a bunch of four letter words. I will say it is on there quite taught.
I am hoping to take the truck to the Finger Lakes in a couple weeks. It's about a 4.5 hour drive. I've done 3 hour trips with it but this would be the longest trip. I need to get a spare tire jack etc..My wife is a little nervous about taking a 37 year old truck that far.

[FleetsidePaul]

I woke up. That's good enough for me. My work is done.

I think it's nap time. Yup. It is.

[LT7A]

Originally Posted by Ol Blue K20

Mine wouldn't pull a long uphill grade. It would start misfiring. Runs great now!

That's so funny. I was fighting bedbolts yesterday to do that very thing. I managed to get 235,000 miles out of my pump, but it doesn't see high temperatures very often. I did a little checking and I'm going back with an AC Delco EP377 to get a little more fuel pressure. I had never given it much thought, but I have read that it's not great to run the pumps below a quarter of a tank due to heat. I'm also going to try to keep it topped up when it's in the high 80s or the 90s here. I forgot that the pumps are in the tank to cool them, not just make them quieter. And if the pump is getting hot, then it's heating the fuel too, which probably doesn't help performance. The OBS trucks supposedly benefit from having a little bit more pressure. We will soon see. Did you guys go back in stock with the EP386 or an aftermarket replacement? Ol Blue, sounds like yours is running well now.

[Redneck Rydes]

Killed about a thousand gypsy moths in the catapillar stage, these things have eaten all the oak trees on the property

[Ol Blue K20]

Originally Posted by LT7A

That's so funny. I was fighting bedbolts yesterday to do that very thing. I managed to get 235,000 miles out of my pump, but it doesn't see high temperatures very often. I did a little checking and I'm going back with an AC Delco EP377 to get a little more fuel pressure. I had never given it much thought, but I have read that it's not great to run the pumps below a quarter of a tank due to heat. I'm also going to try to keep it topped up when it's in the high 80s or the 90s here. I forgot that the pumps are in the tank to cool them, not just make them quieter. And if the pump is getting hot, then it's heating the fuel too, which probably doesn't help performance. The OBS trucks supposedly benefit from having a little bit more pressure. We will soon see. Did you guys go back in stock with the EP386 or an aftermarket replacement? Ol Blue, sounds like yours is running well now.

I agree, I try to fill up between 1/2 and 1/4 tank. I changed this pump 45,000 miles ago. But, it was wrong from the get go. The gauge worked sometimes but mostly not. The part store gave me a new pump on warranty the next day. They told me the called it bad and destroyed because it had gas in it. I waited until it was crapping out before I changed it. I can't believe how bad it was from the start. The truck runs better than it has in a while. I'm a happy boy!

[4u2nv]

Originally Posted by Redneck Rydes

Killed about a thousand gypsy moths in the catapillar stage, these things have eaten all the oak trees on the property

They are bad this way also , going to be a lot of damaged trees from those things

[LT7A]

Originally Posted by Ol Blue K20

I agree, I try to fill up between 1/2 and 1/4 tank. I changed this pump 45,000 miles ago. But, it was wrong from the get go. The gauge worked sometimes but mostly not. The part store gave me a new pump on warranty the next day. They told me the called it bad and destroyed because it had gas in it. I waited until it was crapping out before I changed it. I can't believe how bad it was from the start. The truck runs better than it has in a while. I'm a happy boy!

Good to hear. My bed bolts are going back in with some anti-seize for next time I have to remove the bed, that was a chore. Hope to lift the bed off today and change out the pump. Did you use straps or wood framing to lift your bed? I think I'm going to build an H out of wood and put a chain to the middle of it.

[Ol Blue K20]

Originally Posted by LT7A

Good to hear. My bed bolts are going back in with some anti-seize for next time I have to remove the bed, that was a chore. Hope to lift the bed off today and change out the pump. Did you use straps or wood framing to lift your bed? I think I'm going to build an H out of wood and put a chain to the middle of it.

I used tie down straps hook in the holes on the side of stake pockets. Made an X hooked on and it picked right up.

[57taskforce]

Originally Posted by Ol Blue K20

I used tie down straps hook in the holes on the side of stake pockets. Made an X hooked on and it picked right up.

That’s exactly how I’ve done it on my 98 and my 72 both. Works pretty good if you’re working alone.

I bought my wife a used Yukon Denali today. Going to Phoenix to pick it up Monday. Was hoping to wait a little while for all the used car madness to calm down but her Grand Cherokee started giving us problems last week and left her stranded for an hour or so. At 215K I decided we have gotten our money’s worth and it was time for something newer. ( I paid $500 for it back in 2011 or so with 112K on it) been an excellent vehicle for almost all of our marriage. Time to move on though. The new to us Yukon is really nice. I was afraid I may have to let go of my Camaro but we were able to keep it and reasonably do both. The Camaro is really close to being paid off, and my baby alongside my K20.

All I can say is used car shopping sucks a million times more than normal these days. As soon as they are listed for sale they seem to be gone. I bought this one before it had even been detailed as it was traded in Thursday, I got the financing figured out yesterday and made the down payment over the phone today. In that time the Salesman I’ve been working with said that 6 people have tried to buy it since yesterday afternoon. Pictures to come when I pick it up Monday.