PO has me PO'd - Page 50 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyman63 · 10-21-2009, 03:07 PM

Quote:

Originally Posted by jaros44sr

That only gives me 4 months to finish it and, well...you know how slow I work

Nicely done on your signature, very respectful! Honestly, I don't know how I would handle it after 37 years. Anytime ya want to talk, ya got my numbers

You can do it!

And thanks, I will take you up on the offer one day soon. I'm just taking it one day at a time.

red71cheyenne · 10-21-2009, 09:28 PM

Quote:

Originally Posted by jaros44sr

side markers are brown and black, tied into turn signals which are brown and blue...markers flash with turn signals, Thanks for lookin', when you gettin' home?

I leave here on Monday!! Will be in Hawaii for ten days with the family for a little vacation and then back to Bremerton on the 5th of November. Check in to the ship on the 6th and probably be haze gray and underway. Thanks for the wire tags. Might be able to get that done while I'm waiting to fly out to the ship.

**jaros44sr** · 10-22-2009, 07:05 PM

Quote:

Originally Posted by red71cheyenne

I leave here on Monday!! Will be in Hawaii for ten days with the family for a little vacation and then back to Bremerton on the 5th of November. Check in to the ship on the 6th and probably be haze gray and underway. Thanks for the wire tags. Might be able to get that done while I'm waiting to fly out to the ship.

Glad you're getin' alittle R&R, don't forget I have a '68 front end on here, wire colors could be differant

good luck to ya, and keep in touch

scott123 · 10-22-2009, 07:27 PM

same boat. a guy painted my father-in-law's 70 truck in like 97 or 98. My 69 rusted so bad the cab was sitting down around the mounts. I tried for years to buy the 70 from my brother-in-law. He finally gave me the truck and I thought I had something by running my hand along the bottom of the rockers and visually checking, eyeballing. Brought it home and in the same boat as you, the guy overlayed the rockers. Tons of work now. Scott

**jaros44sr** · 10-22-2009, 09:49 PM

Quote:

Originally Posted by scott123

same boat. a guy painted my father-in-law's 70 truck in like 97 or 98. My 69 rusted so bad the cab was sitting down around the mounts. I tried for years to buy the 70 from my brother-in-law. He finally gave me the truck and I thought I had something by running my hand along the bottom of the rockers and visually checking, eyeballing. Brought it home and in the same boat as you, the guy overlayed the rockers. Tons of work now. Scott

Got pics. of your project, curious to see what ya got? Thanks for lookin'...

scott123 · 10-23-2009, 06:43 AM

i will get some afterwards pics. most of the rust has been cut away and replaced. replaced outer and inner rockers, one corner post, both cab corners and did some patch work on one floor pan....i will try to get some pics and get them posted. i can check things on this laptop but can't get pics posted. when my home PC is up again i can post the few before pics i have and some latter ones. right now i have parts swinging from near every rafter/truss in the building primed and will start painting parts early next week...will try to post them...s

Quote:

Originally Posted by jaros44sr

Got pics. of your project, curious to see what ya got? Thanks for lookin'...

vtblazer · 10-23-2009, 08:33 AM

Quote:

Originally Posted by scott123

i will get some afterwards pics. most of the rust has been cut away and replaced. replaced outer and inner rockers, one corner post, both cab corners and did some patch work on one floor pan....i will try to get some pics and get them posted. i can check things on this laptop but can't get pics posted. when my home PC is up again i can post the few before pics i have and some latter ones. right now i have parts swinging from near every rafter/truss in the building primed and will start painting parts early next week...will try to post them...s

Start up a build thread, let us see what you've got & how your working with it.

Don't wanna Hi-Jack this guys thread...

**jaros44sr** · 10-24-2009, 08:03 AM

well, got the electric rad. fan running, man does that Jeep /Chrysler fan blow/suck

Kinda Rube Goldberg, but I have to get a new fan shroud anyway. M&H did it again, just hooked the black and blue wires up, and grounded the temperature wire out, put the key in the on position and success. Removed about 2 inches from the shround, where the fan mounts up

I may change where M&H broke out the wire, right now it comes out up at the rad. bracket. I think that it would be cleaner if I break it out down by the relay. I'll call them Monday and see if they mind

Chevyman63 · 10-24-2009, 08:45 AM

Quote:

Originally Posted by jaros44sr

well, got the electric rad. fan running, man does that Jeep /Chrysler fan blow/suck

Good job.

And I had a comment for that last part, but I'll leave it alone.

vtblazer · 10-24-2009, 09:02 AM

Quote:

Originally Posted by jaros44sr

well, got the electric rad. fan running, man does that Jeep /Chrysler fan blow/suck

Set it up so it sux real good, you'll be a happy man.

**jaros44sr** · 10-24-2009, 09:06 AM

Quote:

Originally Posted by Chevyman63

Good job.

And I had a comment for that last part, but I'll leave it alone.

Thanks! This is a family board after all

Possibly a bad choice of words on my part in retrospect

**jaros44sr** · 10-24-2009, 09:08 AM

Quote:

Originally Posted by vtblazer

Set it up so it sux real good, you'll be a happy man.

Yep! it defiantly sux

sourkraut · 10-24-2009, 10:17 AM

what years does that chrysler fan cover? I had looked back thru and did not see any info might have missed the info but interested in your setups specs. thanks, Jon

**jaros44sr** · 10-24-2009, 07:37 PM

Quote:

Originally Posted by sourkraut

what years does that chrysler fan cover? I had looked back thru and did not see any info might have missed the info but interested in your setups specs. thanks, Jon

Got the info off of a thread on the pickup board awhile back. A guy in northern jersey came up with the idea, supposed to be a factory fan outta a cherakee. I'll see if I can find the thread for ya. How's your floorboards coming out?

sourkraut · 10-24-2009, 07:53 PM

Thanks, they turned out really good thanks for the info. I have gotten my whole cab done all of the cancer is gone and just have a couple of welds to clean up/hammer dolly. Now i am just trying to figure out whether to pay to have it blasted or strip the rest of the years of paint myself before painting.

Big J · 10-24-2009, 08:20 PM

That fan just looks slick. I wonder if you could epoxy it in the hole.

**jaros44sr** · 10-26-2009, 11:37 AM

Quote:

Originally Posted by sourkraut

Thanks, they turned out really good thanks for the info. I have gotten my whole cab done all of the cancer is gone and just have a couple of welds to clean up/hammer dolly. Now i am just trying to figure out whether to pay to have it blasted or strip the rest of the years of paint myself before painting.

As far as the stripping goes, depends if you have time or money. Good job for you and your son to spend some quality time together. PPE, ventilation, and a good stripper and it won't be a bad job. JMHO

Thanks for providing a link to your build, great work! Now I can watch what you're doin'...outstanding welds

Quote:

Originally Posted by Big J

That fan just looks slick. I wonder if you could epoxy it in the hole.

Thanks J...that's what is great about this board, we get to watch what everyone else does, if you like the idea, you can go with it! Seems like a no brainer to me, 40 or 50 bucks and a relay, minor modification to factory shroud, and you have a system that moves more air with less HP loss

Tough call on the epoxy, some plastics don't work well, and I have two differant types of plastic, sooo...I'll try to buy on the classified section

Now, get back to sanding

**jaros44sr** · 11-08-2009, 11:19 PM

Well, rethought this thing again. Seems like the 2WD fan shroud is going to give me the most room, including the area down around the lower rad. hose.

I changed the way the PO of this shroud had it mounted up. Cutting off the two side mounts and just using the lower bottom mount for orientation. There is a gap of about 1/4" between the fan and the shroud, filled it with single sided sticky weatherstrip tape and screwed it in about 5 spots for now...seems pretty solid, but I can add 'J' clips if needed in the future

Jon, if you need info on the relays I'm using, LMK
Chrysler part # 52079528AB
Bamms part # 0481-0320J

Thanks 1SIK52 for the rear harness
Also picked up some 67/68 side moulding, waiting for clips from Wes @ Classic Heartbeat

**jaros44sr** · 11-10-2009, 02:10 PM

Was told by Wes that there are inferior repro clips out there, so we got them from Mar-K, not disappointed even has a rubber grommet behind nut so it doesn't scratch the paint

I realize this has nothing to do with getting the truck running, but after 3 years of searching ( Thanks D. Passmore, Quality guy, I would buy from him again) I just had to see what this moulding would look like on the truck! An issue popped up on the rear wheel opening as the radius is differant on the blazer/jimmy then on a pickup truck. I see a fix, but want to try it first on a junk moulding

Chevyman63 · 11-10-2009, 04:05 PM

Looking good my friend!

vtblazer · 11-10-2009, 04:27 PM

So much for going off road with it...

Holly smokes Jim, is that thing lookin' nice!

**jaros44sr** · 11-11-2009, 01:44 PM

There is only two reasons why this truck goes off road...

FISH!

And a good friend sitting by a Vermont camp fire with a cold beer in a cooler

Thanks guys for the comps., we will meet up

Chevyman63 · 11-11-2009, 09:34 PM

Quote:

Originally Posted by jaros44sr

There is only two reasons why this truck goes off road...

FISH!

And a good friend sitting by a Vermont camp fire with a cold beer in a cooler

Thanks guys for the comps., we will meet up

BTW, when is the trip?

*1sik52* · 11-11-2009, 09:42 PM

Looking Good!

msgross · 11-11-2009, 10:26 PM

do you have molding for the experiment? I have a few driver quality pieces...

10-22-2009, 07:27 PM	#1229
scott123 Registered User Join Date: Dec 2007 Location: Middleburg, North Carolina Posts: 480	Re: PO has me PO'd same boat. a guy painted my father-in-law's 70 truck in like 97 or 98. My 69 rusted so bad the cab was sitting down around the mounts. I tried for years to buy the 70 from my brother-in-law. He finally gave me the truck and I thought I had something by running my hand along the bottom of the rockers and visually checking, eyeballing. Brought it home and in the same boat as you, the guy overlayed the rockers. Tons of work now. Scott

10-24-2009, 08:03 AM	#1233
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd well, got the electric rad. fan running, man does that Jeep /Chrysler fan blow/suck Kinda Rube Goldberg, but I have to get a new fan shroud anyway. M&H did it again, just hooked the black and blue wires up, and grounded the temperature wire out, put the key in the on position and success. Removed about 2 inches from the shround, where the fan mounts up I may change where M&H broke out the wire, right now it comes out up at the rad. bracket. I think that it would be cleaner if I break it out down by the relay. I'll call them Monday and see if they mind __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 10-24-2009 at 09:03 AM.

10-24-2009, 10:17 AM	#1238
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: PO has me PO'd what years does that chrysler fan cover? I had looked back thru and did not see any info might have missed the info but interested in your setups specs. thanks, Jon __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-24-2009, 07:53 PM	#1240
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: PO has me PO'd Thanks, they turned out really good thanks for the info. I have gotten my whole cab done all of the cancer is gone and just have a couple of welds to clean up/hammer dolly. Now i am just trying to figure out whether to pay to have it blasted or strip the rest of the years of paint myself before painting. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

10-24-2009, 08:20 PM	#1241
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: PO has me PO'd That fan just looks slick. I wonder if you could epoxy it in the hole. __________________ BAZINGA! My Build

11-08-2009, 11:19 PM	#1243
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd Well, rethought this thing again. Seems like the 2WD fan shroud is going to give me the most room, including the area down around the lower rad. hose. I changed the way the PO of this shroud had it mounted up. Cutting off the two side mounts and just using the lower bottom mount for orientation. There is a gap of about 1/4" between the fan and the shroud, filled it with single sided sticky weatherstrip tape and screwed it in about 5 spots for now...seems pretty solid, but I can add 'J' clips if needed in the future Jon, if you need info on the relays I'm using, LMK Chrysler part # 52079528AB Bamms part # 0481-0320J Thanks 1SIK52 for the rear harness Also picked up some 67/68 side moulding, waiting for clips from Wes @ Classic Heartbeat __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-08-2009 at 11:37 PM.

11-10-2009, 02:10 PM	#1244
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd Was told by Wes that there are inferior repro clips out there, so we got them from Mar-K, not disappointed even has a rubber grommet behind nut so it doesn't scratch the paint I realize this has nothing to do with getting the truck running, but after 3 years of searching ( Thanks D. Passmore, Quality guy, I would buy from him again) I just had to see what this moulding would look like on the truck! An issue popped up on the rear wheel opening as the radius is differant on the blazer/jimmy then on a pickup truck. I see a fix, but want to try it first on a junk moulding __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-10-2009 at 02:24 PM.

11-10-2009, 04:05 PM	#1245
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: PO has me PO'd Looking good my friend! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

11-10-2009, 04:27 PM	#1246
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: PO has me PO'd So much for going off road with it... Holly smokes Jim, is that thing lookin' nice!

11-11-2009, 01:44 PM	#1247
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd There is only two reasons why this truck goes off road... FISH! And a good friend sitting by a Vermont camp fire with a cold beer in a cooler Thanks guys for the comps., we will meet up __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-11-2009, 09:42 PM	#1249
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: PO has me PO'd Looking Good!

11-11-2009, 10:26 PM	#1250
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: PO has me PO'd do you have molding for the experiment? I have a few driver quality pieces... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.