GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck

[Grizz1963]

2 Random short blog posts coming up for the non-forum types.

Rezin Rockit woes summarised.

First entry's here

No2 to come

https://www.grizzmakes.com/2023/02/r...o-what-to.html

Alternately, just keep reading here.


.

[CG]

Reading your blog it struck me as funny reading that you went to Euro Carparts. Considering you are in Europe wouldn't it just be Carparts? (I know, silly observation)

Go to China and ask for Chinese food. Anyway Im still enjoying your thread here on the board. Hope you're feeling better

[Grizz1963]

Originally Posted by CG

Reading your blog it struck me as funny reading that you went to Euro Carparts. Considering you are in Europe wouldn't it just be Carparts? (I know, silly observation)

Go to China and ask for Chinese food. Anyway Im still enjoying your thread here on the board. Hope you're feeling better

Good observation.

I think Euro carparts started as a “Non-American” store.

But who knows, certainly worse for knowledgeable people than O’Reillys.


Headed out, late in the day, to open up and see what the throttle body and air system looks like.

Suggestions have been that it may need a clean up.


Lets see what today brings.

School of YouTube showed me some stuff.

.

[Grizz1963]

Greetings from Siberia, buddy Stas sent a pic of himself wearing a T-shirt I sent him.

The world really is a great small place.



So today was a slow day, lazy, other stuff to do, weather, you know…… excuses. Lots of them.

So I opened the air feed to the throttle body and cleaned it out in position.

A lot more came out on the micro fibre cloth with carb cleaner.



Resulting in a bit cleaner airways after cleaning this mess, both sides of the butterfly.

Needs more doing to it.



After starting it up, it was hunting for a while.

Then warmed up and settled mostly at 900 rpm.

Video below shows a bit more.



VIDEO:

https://youtu.be/ZETKPq4u0VU


While the motor was doing its own little thing, I checked the lights one more time.

Including the rear foglight.






Once the rain became unpleasant, I headed indoors and sat watching some YouTube videos supported by the second best thing after a good rum with friends…..

Coffee.



So, weather permitting, tomorrow I will revisit this thing and also investigate the air supply or lack of it.

Dinner was good, sweet n sour pork with spring rolls.

Boooom !

[Grizz1963]

Sunday was a slow day, a few small jobs on this build and some other stuff that needed dealing with and filming for the YouTube Channel.

First job was to replace the one Riv-Nut in the screen holding the wiper motor in place, and then setting the sweep so both are symmetrical in their action.

Few minutes to undo and remove, and refit a fresh one.



Need to look carefully on the screen for the final setting…….



Next up was the engine, and to be honest……

After starting it up, it died twice before settling into an even idle at 900rpm

I will call that good for now.

So I drove up and down to the farm a few times, including taking Mickey for a ride. He is like a dog, loves to be part of everything and does like a car.

He gave it the stamp of approval and told me not to go onto the main public road till the car is fully insured (wise words from a drink-driver). I soooo wanted to do a few miles, but the short 1km farm road will have to do as a test for now.

Pleased with the engine settling down I thought it was a good time to wash the car, clean the dusty engine bay and interior.

Does look so much better all cleaned up.





Interior…….

I think it looks good enough for what it is.





Engine bay and engine wiped down a bit as well.



I have a busy work week ahead, but will try find some time to see if I can get a one day insurance policy, like I did with the Scruffy Micra.

Once insurance is sorted, book an MOT for hopefully next Saturday afternoon, and weather permitting (some snow is forecast) we can try get it through an MOT test.

My fingers will be crossed, but really, everything seems to be working now.

Thanks for checking in as always.

[Palf70Step]

Glad to see it rolling Rian. MY fingers will be crossed for you when I am not typing. (hard to do when they crossed, although my speed and skills may look the same )

[Grizz1963]

Originally Posted by Palf70Step

Glad to see it rolling Rian. MY fingers will be crossed for you when I am not typing. (hard to do when they crossed, although my speed and skills may look the same )

Thanks Bill.

I am hoping it all comes together





[quote author="@kevins" source="/post/2771336/thread" timestamp="1676887338"]Before you take out a days insurance have a ring around a few of the specialists, for us mature types it can be ridiculously cheap to insure some 0f these things (I pay less than £100 for my elan).[/quote]

That was a good and shrewd comment.

It was possibly dancing around in the back of my head, as daily/hourly insurance can be convenient, but extremely expensive.

[quote author="@joem83" source="/post/2771370/thread" timestamp="1676902535"][quote source="/post/2771336/thread" timestamp="1676887338" author="@kevins"]Before you take out a days insurance have a ring around a few of the specialists, for us mature types it can be ridiculously cheap to insure some 0f these things (I pay less than £100 for my elan).[/quote]Agreed, give Brentacre a try. My mk2 is £160 p/y fully comp with all mods declared (only thing standard is the shell), also agreed value & salvage retention rights.[/quote]

I went to my usual first stop, AIB, after “Veygo” by Admiral insurance who did the Micra previously referred me to a hyperlinked email service, which sent three responses, including a human, asking for more information than make, model, registration.

Firstly, Veygo tried via their suppliers, and then responded later in the day to say they could not quote, but did I want to insure anything else with them……. Errrmmm… No.

More on AIB in a bit.

[quote author="@jamesd1972" source="/post/2771374/thread" timestamp="1676903212"]Just as another thought- even if not planning to use it for a bit once insured it’s covered for loss anyway- worth thinking about if anything happened when parked up.
Nice to hear it’s up and running.
James
[/quote]

Really good and valid considerationJames, and thank you.


So……

I called AIB and the agent who took my call has spoken to me before.

He is spectacularly “by the book” in his information gathering.

A longwinded (but thorough) interview and then questions like what excess I expected to pay, what would I think is a good premium etc had me somewhat amused and irritated in equal measure as I was now parked up on a garage forecourt, wanting to fill up the company car at 11.00.

Long story short .

Car valued at £3500.00 (yes it cost a bit more than that in labour and parts to build) excess at £150.00 and limited to 1000 miles per year, or 1600km per year which sounds like very little, but keeping in mind it is a No 3 car behind the company car and Chevy S10 and if I wanted more miles I can call and alter the policy.

So the policy offer with Marker Study insurers was £175.00 per year.

To which my response was a bit rude and abrupt, possibly shocking the agent.

I had mentioned that I had also approached two other insurers and was waiting to hear back from them, but that his quote was way more than the £90.00 to £120.00 people on the forums I frequent were paying. He asked for a moment while he sharpened his pencil, which I agreed to. And ten minutes later the offer was £132.00 per year for the same cover.

This sounded much more in the ball park and I asked him to send details so that I could compare to the offerings from the other companies.

I went to work and felt better about the price.

At around 12.45 while on a meeting with a colleague to try sort out my suicidal work iPad a call came through…… the eager agent again, I answered the call and said I would call him back later.

When I left Woolwich I called him back, but unable to speak with him, I spoke to a colleague who went into the file and told me the young gun had continued to dig around after our first two conversations and managed to somehow get the price reduced to £110.00 per year for the same cover.

I think the fact that this is a summertime , good weather only car, reduces the time on the road and and thus the risk to the insurer.

Lesson for today then…… Sometimes it makes sense to challenge and also be nice in equal measure.

I have booked the MOT test for Saturday afternoon so fingers will be crossed that I/we @nickwheeler had a huge hand in this build have managed to get it all together the way it will make it a fully legal and safe vehicle.

I spoke to the guy at the scrap/steel recyclers and he will charge me £5.00 for a weigh bridge ticket to weigh the car, something I am absolutely fascinated with.

Full tank weight…… I have tried to guess, but really have no clue, but if it comes in at 800kg wet weight, I will be pleased.

I need to call Green Flag who are the recovery agents for the S10 ever since I went to @frankenhealey to collect the lawn tractor and see if they will add the Rezin Rockit for recovery to the policy.


That is probably it for now, unless we have storms and snow on Saturday, in which case…… no game.

[Grizz1963]

Dennis sent a pic of the GMC he was not going to do anything to, just drive it.

Now with completely new paint, it is also getting a new exhaust system.

Looking forward to seeing it if I do go on a USA road trip this year.




.

[Grizz1963]

.

NEW BLOG ENTRY FOR TODAY.

Date will look wonky as it shows 11th but here you go.

Biltong, making your own. (Like Beef Jerky, but not.)

https://www.grizzmakes.com/2023/02/b...ngdom-yes.html

These are dying arts in some communities, so a share and a link to a UK home industry maker included.

He will sell and mail out to you at cost. Follow the link at the end.


.

[Grizz1963]

Did a few small final jobs tonight after work.

Glued panels in place, including the surround on the instrument cluster..

Plus I made a masking tape sign for the fog light switch.

And finally a small, overdue job…. Got the wiring loom in the cab wrapped and tucked away.



So tomorrow morning I will test lights etc all one more time, you know how stuff stops working to or from the test station.

As mentioned before, fingers crossed that I have managed to check all the checks.


.

[Grizz1963]

28 August 2020 is when I started this thread.

Nearly 580k views just on Retro Rides, and at one point it was over 1000 views per day.

I am not sure many threads get that sort of viewership or interest. There are a bunch of other forums I contribute to and they all had high viewerships and interest

I would guess the global views are well beyond 800k over 2 years.

This build was a very singleminded vision of something I had wanted to do for a long time……… BUT, so many people from Siberia to Southampton and Auckland to Arkansas Cape Town to Cairo contributed in so many ways.

Materially with parts, specialised tools (just think Void Bush Tool), machining and fabrication, thanks @nickwheeler and a bunch of others.

Anyone who feels forgotten or missed out, here is your thank you.





So today I actually drove the car for the first time, going beyond 3rd gear, which was as much as I dared do out on the farm road.

I drove to the scrapyard where so many bits of steel and scrap has come from over the years for various projects.

Onto the Weigh Bridge.

Me inside (120kg) and about 35-40 litres of petrol.

Result, you do the maths.



900kg minus me, gives a decent light weight.



From there it was over to the test station, a bit early, but rather that than late.



And onto the ramp.

They have a lowered ramp to get abnormally low stuff onto for testing.





And up they went.





All four the testers in the centre came to take a look, pointing a few things they liked, out.

One thing that became apparent once the front crossmember was in the air and the wheels and bearing were being inspected was that though within tolerance, the passenger side wheel bearing needed to be tightened or replaced.

Other than that, the comments ranged from awesome, cool build and tidy installation to I wish I could drive this on a track.

High praise indeed.

I will take out road tax next month from the 1st of March as paying a months tax for one days use makes no sense.

I will check out and probably replace the front wheel bearings on both sides.

Also take it for full alignment on a digital machine.

Tonight I am really pleased, thankful and happy for all this community and helpers have helped me,create and achieve.

Thanks again.


.

[Palf70Step]

Good show mate! Glad she is roadworthy Rian.

[CG]

Super cool! What did they say about your wrench on the back, anything? I was afraid you would get some old twit and make you take it off.

[Grizz1963]

Originally Posted by Palf70Step

Good show mate! Glad she is roadworthy Rian.

Not as glad as I am Bill.

Now we can start testing and changing.

Originally Posted by CG

Super cool! What did they say about your wrench on the back, anything? I was afraid you would get some old twit and make you take it off.

They thought the wrench was funny.

I think that being a bunch of young guys working there, they get my humour.

[Grizz1963]

Checked out the tax online for the car. £295……. That’s a lot of money. If you add £110.00 insurance, £202.00 recovery service and £50.00 MOT test, getting on the road is not cheap.

Still, the more you drive, the cheaper it gets.

[Grizz1963]

Got home early today.

Off work after all….. Taken the next 4 Fridays off, as we lose our vacation if we don’t use it by end March.

Chilly,5’C with a brisk breeze.

Went and checked what was thought to be the wheel bearing.

Turns out that with all the fitting, and removing of the 4x108 to 4x100 adapters, I must have omitted to lock it down the last time I reassembled the front end.

Will take a drive tomorrow to go have the alignment done and feel of the vibration has ceased.



And George who has become a garage cat/follower down to the garage, also insists on watching and waiting for you to get showered.



I checked the rear brake light, bulb filament was intact, and I could not see if it worked when I hit the brake pedal.

So will try later in the dark.

Been thinking, considering this is very much a summer car, I think insuring by direct debit on a monthly basis, despite it being more costly on a year on year basis, not paying for 6 months when the weather drives us indoors, may just be a sensible move.

Opinions?

[Grizz1963]

Saw this great rebody…..

Must be an amazing engineer, or a policeless state or something like that.

Over here…. Not sure it would make it off the driveway








I am still gutted the 2CV van seller never came back to me, or read my messages.

He is a FB non-entity it seems.

With some effort, this could have been a cool, silly build.

Day off today, so headed out to have a few things professionally done.

[Grizz1963]

Ultimately an uneventful day.

Alignment guys could not help, booked in for next Friday.

Fronts balanced. Rears are getting some wider 215/65-15’s I am buying from @pauly to replace the 195/60’s fitted on these 8J rims.











Today @craigrk is coming down via Pauls place to play and see the new for 2023 build.

Chilly outside though.

[Grizz1963]

Rezin Rockit passing it’s MOT successfully was the trigger point for launching and exposing the new MEGA BUILD on here.

https://forum.retro-rides.org/thread...in-rockit-pass



I am a bit busy today, but suffice it to say that the new project has been acquired.

It will be a bit of a slow burn this as I have a real life to deal with outside of YouTube, Blogs and forums.

Today being a case in point, 4’C out there but a few small tweaks need doing on the Rezin Rockit including wiring, which has never been my strong suit.

But having mate Craig down from Shropshire, it is a good time to get it done.



So here goes: 5, 4, 3, 2, 1……..

How to screw up your life in 26 miles…..

Do not drink and drive, do not drink and Ebay , do not drink and surf Gumtree or Marketplace. Do not do drugs kids.

Or else.

26 miles……..




5 Star entertainment

4 Wheels

3 Doors

2 Seats

1 ….???




I will get back to this thread update later.

Got stuff to do.

Later.




.

[Grizz1963]

Sitting on a Saturday night at Sally’s place, surfing the web, while she cooks……

Looking for the next crazy build, I saw something silly.

A 2001 European import.

So I messaged the seller, after seeing that he had other stuff for sale, mostly automotive parts etc.

No reply.

Sunday morning Sally made us bacon and fried egg sandwiches for breakfast.

No reply.

And clicking into the Marketplace ad, I saw the message below and that the seller had not seen my message.

GUTTED.

ABSOLUTELY GUTTED…….

So I sent another message, but as an offer, because I am like that, I will always try again and again, just in case I do get a second shot.

So I said to the seller that if his buyer pulled out for some reason, to let me know.



Around 10.30 a message pinged in.

Yes, the car was still for sale…. He did not understand why it had listed itself as unavailable.

Who knows.

So I agreed to go racing over there to look, and got a postcode and address.

Off I went.



Video made as well.

Of course.

[Palf70Step]

Well ?!?!?!

[Grizz1963]

Originally Posted by Palf70Step

Well ?!?!?!

Soooon my,young friend, soon.

[Grizz1963]

So when I got to the

So when I got to the sellers place, there were three of these outside……

I do not know the classes in banger racing, seems this is a non contact type with an emphasis on winning and finishing, not destroying cars.



The seller and a friend came out and greeted me, while I was a bit taken with the sheer size 0f the car I had come to look at.

While chatting, it became apparent that I had landed in petrol head paradise.

I knew his fathers car……..

I had looked at it and drooled before.

@forddan68 had previously valeted these cars……. So though not directly connected, these were known people.

The dads Lexus powered Ford……

https://youtu.be/OMymMUciaac

And then getting to know more, the sellers weekend toy, hand built from an imported, left hand drive shell blew my mind.

https://youtu.be/LYEfc1vsfTA

After an hour or more chatting, a price was agreed.

Including delivery 26 miles away.

I left them and drove home.

I had Not yet told Sally.

Excited for sure.

No idea why.

5,

4,

3,

2,

1…….?

[Palf70Step]

https://tenor.com/EPHw.gif

[Grizz1963]

Originally Posted by Palf70Step

https://tenor.com/EPHw.gif

There you go Bill:






So Sunday morning 11.00-ish sees me headed out, using SatNav as I am going places I have never been before.


https://youtu.be/Ny5UZP65TU8


I get to the given address, it is chilly out, frosty.

But the reception is not chilly.

What made me hit the “Buy it Now” button, is even smaller, and leaves me chuckling and feeling the madness completely consume my inner being.

This is too wrong, too right, I WANT IT.

Chatting with the seller and his mate, it is clear these guys live life fully, grabbing every day by the balls and shaking it vigorously.

You know the type….. the guy at school who would poke a wasps nest.

I wanted to be that guy, just that I never even came close to it.

So what have we got…..???


5 Star Entertainment

4 Wheels - Only just.

3 Doors - OK yes

2 Seats - Albeit tight in there.

1……….?


The 1 of course is the biggest surprise.


1 CYLINDER - I kid you not. 160cc with CVT belt drive.


And it is small..


CANTA LX





But I am smitten…… we do the “Dollar Boogie” and seller asks me what I want to pay, I throw a price out…… He declines.

I ask him if he could deliver as that is another logistical issue. As I have no towbar, no trailer, no flatbed recovery, no Sprinter or similar van to try shoehorn it into for the trip home, that I know it has to make.

Yes, he can get a delivery truck and deliver.

I ask him if it starts, because the ignition barrel is damaged, the alternator belt is missing, and it looks pretty sorry for itself, much worse than stuff I have seen cross the scrapyard weigh bridge. .

“Yes, it starts” is the reply, but there is no fuel in it. Again I feel my heart drop, sounds like the sort of reply you expect……

Seller still eager, gets his mate to go find an empty 2 litre lemonade bottle and some pliers…….

Goes to his daily car, a Mazda 3 MPS (I did not know it is a performance model, you learn every day) whips off the fuel pipe at the injectors, cranks over the motor till he has 2 litres of fuel……

Dumps it into the diminutive fuel tanks.

Opens the fuel cock, choke, buddy on the throttle (This thing has no foot controls, only disabled use, hand controls) and pull starts it in the front of the engine bay.

THIRD PULL and it bursts into life, and promptly settles into an asthmatic idle……

Seller and his mate nonchalantly revs it a few times, while I stand there with a foolish grin on my face, wanting it at home.

Yup, now I know I have to have this thing.

Revving it up again, he is about to take it for a drive down the road to demonstrate it goes, when it splutters and dies.

So he tries to get it going again.

NADA.

So we get back to the price and I ask him how much he wants to deliver it to my house, postcode.

Seller says a price…….

I agree.

Delivery will be at around 4.00pm

Shake hands and I head home.


I had still not told Sally, just that I was going to look at “Something”


Back home, the rest of the day took a long time to drag by, and I continue with the Rezin Rockit fettling.


Eventually at 17.47 there is a text to say they just turned up my road…….

This is so that I can get in the street to film the arrival of the car……


When they arrive, I hear the Canta LX engine running on the back of the recovery truck.

Yup, he started it and drove it onto the truck and just to show it works well enough, had left the motor running.


I am grinning madly……


Seller takes it off the ramp, and @nickwheeler in his usual dry way is certainly underwhelmed………


But I don’t care.


I have my little thing, not sure what to call it, except what the factory called it.


More chat, and the seller and his mate leave, they delivered two cars and had not yet had lunch, despite it being 18.00 on a Sunday evening.


Closer inspection shows just how bad this thing really is.


But I love it.

Remember this question thread…..??

Still looking.


https://forum.retro-rides.org/thread...-wheels-offset








So Nick and I walk around, he is probably having a meltdown, wanting to whack me with a tyre iron for buying this thing……

Me……….?? HAPPY.


This thing is bad, really bad.











If you take the time to go look up the registration, you will see the full name.





Eventually I calm down, Nick and I push the little guy back into the carport, next to the Rezin Rockit.


It really is small.





In closing, all I can say is that I told a few people, and those who came to see it, like Fil Sparkplug and @craigrk both fell for its quirkiness and wanted it based on photos, and after meeting it in person, still wanted it.


More information as it unfolds.


Welcome to the latest madness at Grizz Towers.


It will be recorded and reported on my YouTube channel and probably on the blog, once I figure it all out.