Facebook Marketplace finds

[Casper42]

Originally Posted by dave6672

https://www.facebook.com/marketplace...9010511296904/

They really brought the paint around on this one.

looks like two completely different trucks to me. One white/willow green, and the shiny one willow green/glennwood green

[Wikid61]

https://www.facebook.com/marketplace...a-25cd56173cfe 1972 Chevrolet c10
$3,000
Listed 4 weeks ago in Victor, IA

[Wikid61]

https://www.facebook.com/marketplace...a-25cd56173cfe 1967 GMC C10 pickup truck, 305 V6, 3 speed on the column, aluminum slots, decent tires, new front brake lines and hoses, drive it home. $2,000 OBO. Pick up just north of Marshalltown.

[Wikid61]

https://www.facebook.com/marketplace...a-25cd56173cfe 1967 Chevy C20
3 on a tree manual transmission
Unsure what motor
V8 turns over by hand
Title in hand
Not firm on price so make me an offer
$2500 OBO

[Wikid61]

https://www.facebook.com/marketplace...a-25cd56173cfe 1970 4×4 c20 needs restoration no trades frame included sandblasted and powder coated 4x4 frame call five six three five nine nine seven one zero seven ask for Tom no trades will not respond to is it available if it's posted its for sale

[Wikid61]

https://www.facebook.com/marketplace...a-25cd56173cfe I WILL NOT RESPOND TO “IS IT AVAILABLE?” 1969 GMC Sierra. Short bed. 2 wheel drive. 350 motor with 700r4 with about 2000 miles on both. New Holley 600 carburetor. New tilt column. Headliner. New master cylinder and brake booster. Wood floor which is pine. Bucket seats. Has old school air. Not charged right now, but does work great. Rust free. Runs and drives great. We take it to shows on the weekends and drive though out the week. $25,000 obo. Have a clean Iowa title. Located in Dubuque, Iowa.

[Wikid61]

https://www.facebook.com/marketplace...a-25cd56173cfe 1971 Chevrolet 3/4 ton 2wd truck
rebuilt 350 engine 350 turbo
dana posi rearend
new paint brakes new
new rubber gaskets for windows
new shocks soft ray glass (tinted)
new rear slider
original jack
has a few minor dents and scratches
clean Iowa title
$20000
owned for the last 15 years
serious inquiries
no holds
Garnavillo, Iowa

[Wikid61]

https://www.facebook.com/marketplace...a-25cd56173cfe Nice used tach dash cluster for 67-72 truck. Tested and working. Cleaned and painted needles as needed. $460 cash or PayPal. Can ship on your dime. Dysart Iowa

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 I really don't want to get rid of this truck it has alot of sentimental to me but I have to get a good running car for me and my daughter I'm open to trades it will need to be trailer out cause of the transmission and needs a carburetor it has a 350 board out about 30

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 For sale 67’ Chevy C10, this things a solid 40 yard beaut! Powered by a 305 out of a Camaro I’m told it’s .30 over I have no paperwork on it, I believe the factory 3 speed is in it, it’s been converted to a low quality floor shifter, it’s not perfect but it’s great for a nickel and dime ya to death situation. She comes loaded with weight reduction, and a fresh oil based paint job to slow the reduction. $5,500. OBO
-Brake lights need switch
-gas gauge doesn’t work
-starter week when warm.
Runs, drives stops.
Its 55 years old so there is a ton of personality. Message me for details seven eight five 323 7 and three 9’s

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 Have a 67 c20 for sale. No motor or transmission, no gauges. Body is in fairly decent shape. Not a tone of rust on it. Have extra box that goes with it. Wheels are in good shape. Tires are bald. AC cab with big back window. Rolls really easy. Have clean title asking $1,800

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 1967 true SWB C10. It has a modified LS 6.0 that puts around 400HP to the tires. (243’s from Billy Dixon) It was tuned by Abel Racing. The 4L60 (2800 stall) was built by Larry Wilson and works as it should. TBSS intake, Boyd’s tank, custom precision driveline, 2/4 drop on lowering springs, built differential w 373’s and posi, 5x5 conversion, disc brakes up front w/ drums in the rear, LED tail lights, power steering pump is there but bypassed at the moment, Dakota digital VHX gauges, full 3” stainless exhaust w/ Borla XR1’s, new painless harness installed, DBC PSI engine harness, aluminum radiator w/ dual electric fans, and OEM 15x8’s all around. I’m including new door latches, window regulators, 6x9 weld-in mounts, as well as inner and outer rockers. I do have the drivers door panel. I’ve put around 500 miles on it in its current state. All of the glass is original and in the truck. I’m not interested in any trades. I’m only selling it due to not having any time to finish it.

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 NO TRADES, NO TRADES, NO TRADES... Nice little rat rod. Body is better than average. Good bed and bed floor. No rust in cab supports. Over roof and firewall is solid. Has a little rust in floor and rockers, lower doors, and one cab corner, but not bad at all. Has rear tubs. Strong running 4-bolt main 350, 882 heads with mild cam and fresh gaskets. No knocks/rattles or smoke. Headers, performer intake. Electric choke carb. TH400 trans that shifts strong. Brakes are good (6-lug drums). Front end is tight. Lowered with heated springs. Power steering with tilt wheel. New radiator, fan, 1-wire alternator, oil change, belts, anti-freeze, thermostat, plug wires, master cylinder, etc. No title in AL on this model. Bill of Sale only. Cash. No trades.

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 1967 Chevrolet C10
Short wheel base
350
3spd transmission
Wood floor
Small back glass
Does not currently run or drive
Engine is good.
Nice patina project
Marquette Auto Sales
301 1st st
Fisk MO 63940

[Wikid61]

1967 chevy c-10 shortbox fleetside
Show,cruise,race
427 ci sbc pump gas motor
T400 full manual valve body
Moser 9" 4:10 gears
Chromeoly cage
4 wheel disc brake
4 corner double adjustable shocks
Jim meyer racing front end
Flaming river rack
Ididit column
https://www.facebook.com/marketplace...b-00eb9aeadb45

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 Up for sale is my 1967 C10 short bed truck. It’s an original short bed, not cut down.

Features a 307 small block chevy with a turbo 350 trans. Truck runs great.

Beautiful interior reflects new: seat cover, visors, dash pad, carpet, door panels, steering column, and steering wheel.

Newer paint is decent but does show some imperfections. You can see some rust bubbles and cracks but still a very sharp looking truck.

Feel free to reach out with any questions.

Thanks for checking out.
Good:
• New torque converter
• New intake
• New carb
• New aluminum radiator
• New driveshaft center bearing
• New shifter linkage
• New proportioning valve
• New trans lines (nickel copper)
• New rear axle bearings and seals
• New CPP rear axles and drums
• Newer brakes (pads, shoes, drums, hardware) (front disc conversion)
• Newer lower ball joints, outer tie rods and adj sleeves
• Flow master dual exhaust
• New windshield
Bad:
• No radio
• No HVAC
• Odometer does not work.
• Windshield wipers do not work.
• Front passenger fender was repainted, does not match rest of truck.

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 1967 Chevy C10 truck. 350 engine, 4 barrel, headers, dual exhaust, auto transmission, power front disc brakes, power steering, long box with wood panel floor (currently with plywood). Have numerous new and used parts to go with it as well as several dashboards with gauges. Serious inquires only. Cash only. Pick up in Gretna NE. Call [hidden information].

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 lassic Chevy Truck
327 CI
4 deuces
Wood box
Selling for my brother, his phone number: [hidden information]
Call him with questions or to set up a time to see
Oconomowoc, WI
Location is approximate
Seller Information
Robin Allen Simoneau
Joined Facebook in 2008
Sponsored

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 $26,500 very solid southern truck, almost everything new but cab, line x spray on bed, newly upholstered seat, new carpet, newly built 383 stroker, headers, new disc, new dual exhaust, 700R w/ overdrive,power booster brakes, no rust, very dependable drive anywhere truck, . $29,500
Greenwood, IN
Location is approximate
Seller Information
Robert Chastain
(12)
Joined Facebook in 2014
Sponsored

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 This is a 1967 Chevy C-30 1 ton dually. It has 10 ft bed with clean title. Nice truck. For more information, call Chuck: four one seven-eight six one-one two one nine. I don’t text.

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 She’s a sweet little truck! 1967 Chevrolet pickup with a small back glass. Has a 1976 350 4 bolt main engine, turbo 350 trans (rebuilt last year). Has a New fuel tank and sending unit. New radiator, heater core, blower motor, New carb, master cylinder, belts and hoses. New tires and was converted to 5 lug wheels, with new exhaust. This truck drives and handles great! New plugs and wires. Has power steering, disc front breaks, drum rear on master cylinder. If you’re looking to restore this pickup, know that it will need attention to the normal parts which are prone to rust. Floor pan has a couple rusted out spots, outer rockers are mostly solid with a few pin hole spots (pictured), needs inner rockers and cab supports. Cab corner on drivers side looks solid, passenger side cab corner has filler cracking from a previous repair (back in the 80s I was told). The wood in the bed needs replaced. Restore it or leave it! It’s an awesome driver with great patina

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 This truck was bought new by my father and passed down to me.it ran when I parked it several years ago. I lost interest in fixing it up. Never wrecked. I lost the key eay to replace.small rear window very rare. Would make someone a nice truck to fix up.

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 1967 Chevrolet 3500 HD Regular Cab · Truck · Driven 64,000 miles

67 small window chevy with 1977 1ton 4x4 dually underneath. Fresh 400 4speed with custom built flatbed.
New wheels and tires. Too much to list.
Great patina and one of a kind truck.
Alot invested no trades no lowballin.
It's listed its available serious only. Negotiable in person only.

[Wikid61]

https://www.facebook.com/marketplace...b-00eb9aeadb45 1969 Chevy K20, 67 all window cab. No title. Have original 69 K-vin tag. Really nice frame rails. 4.56 gears. Sm465 4 speed NP205 T case.
350 with a brand new cam and lifters runs strong. Less than 500 miles.
Edelbrock carb performer carb.
Has new dual exhaust, quiet mufflers.
New brake lines and front hoses.
1 front brake cylinder is leaking. Replacement comes with. Both are new on truck.
Rear wheel cylinders are original and are not operable.
Runs and drives but needs brakework.
Steerings nice and tight
Has new coil over front shocks and standard read shocks that come with it.
4 wheel drive works
Comes with spare front and rear axle. And rear.springs.
Has potential.
If I work on it more or find the title the price goes up
Scammers and losers
Get a job, a car, move out of moms basement. Nobody is coming to save you.
2250 OBO