Glock's new project: "Fred" w/ 5.3L LS swap info - Page 51 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Thealien** · 01-28-2010, 11:07 AM

Quote:

Originally Posted by glock35ipsc

Sweet, thanks for the part number!

As we find more info I add it to the LS thread in my signature.

glock35ipsc · 01-28-2010, 11:13 AM

Excellent. I'm in the middle of putting together a spreadsheet of part numbers that I used, and any others that are relevant that I come across, in hopes of coming up with a list of minimum parts needed to do a swap.

Your thread is killer BTW!!!

menace121978 · 01-28-2010, 11:21 AM

right on! that is a good article. i'm going through it now

rongstad · 01-28-2010, 11:38 AM

Gee another expensive part i need to buy........

**Thealien** · 01-28-2010, 11:43 AM

Working on another one now. Don't know if it should be added to that one or on its own.

I am trying to put together a GM parts list for connectors and pins for all the harness connectors in case anyone wants to build their own harness or repair broken connectors. Its turning out to be a daunting task. All I have info for is a 2005 5.3 and I only have 80% of the connector pictures?

Accelerator pedal position sensor
Connector Part Information • 15318071
• 10-Way F Metri-Pack 150 Series (GY)
Pin Wire Color Circuit No. Function
A GY 1273 Low Reference
B PU 1272 Low Reference
C L-BU 1162 APP Sensor 2 Signal
D TN 1274 5-Volt Reference
E BN 1271 Low Reference
F D-BU 1161 APP Sensor 1 Signal
G WH/BK 1164 5-Volt Reference
H -- -- Not Used
J YE/BK 1275 5-Volt Reference
K D-GN 1163 APP Sensor 3 Signal

glock35ipsc · 01-28-2010, 12:07 PM

Looks like you probably have what I have?

**Thealien** · 01-28-2010, 12:17 PM

Very similar but I saved yours anyway. Might be easier to just use your links in my thread also.

I didn't look but does yours have the transmission connectors, oil pressure, and the engine harness to coils connectors? Those weren't included in what I had and I had to find them. If you don't have those I can forward them to you in an email. Mine are in a less user friendly format.

glock35ipsc · 01-28-2010, 12:29 PM

It has:

Transmission:
AT Inline 20-way connector. If I remember right, this was on he P/S of the trans
Park/Neutral Position Switch
Range Position Switch
VSS

Oil Pressure:
Engine Oil Pressure (EOP) Sensor

Engine Harness to Coils:
Ignition Coils (1,3,5,7 cylinders)
Ignition Coils (2,4,6,8 cylinders)
Ignition Coil 1
Ignition Coil 2
and so on, all 8 listed individually

glock35ipsc · 01-28-2010, 12:52 PM

Just to give you all an idea of what I am doing for part numbers.

I might go through and note part you will need for sure, and what are optional. Instead of an overall list of what out there, I'm doing something more along the line of a minimum list of what you will want/need to do a swap into a square body, and might tweak it for a 67-72 also.

It's not complete, this is just where I am at right now.

**Thealien** · 01-28-2010, 12:56 PM

The info I have has a few more connectors including the flex fuel injector connectors, trans shift solonoids etc. It is about 2MB if you are interested in it PM me an email address

glock35ipsc · 01-28-2010, 12:58 PM

My screenname, plus @aim.com

Thanks!

**Thealien** · 01-28-2010, 01:03 PM

Sent, let me know if you recieve it and can open it

glock35ipsc · 01-28-2010, 01:14 PM

Got 'em, and I can open them. Thanks again!

Driveway Dreams · 01-28-2010, 01:25 PM

Wow, great info. That is even pretty clear to me and we all know that I am not the mechanical genius in the group.

Good job!!

menace121978 · 01-28-2010, 02:52 PM

very cool! i dont think you can make it any easier Bob... short of traveling state to state and doing the installs yourself

joe231 · 01-28-2010, 02:55 PM

Quote:

Originally Posted by menace121978

very cool! i dont think you can make it any easier Bob... short of traveling state to state and doing the installs yourself

Excellent Idea!!!!!!

STOCKISH · 01-28-2010, 04:13 PM

Thats what I was thinking. Come to North Carolina first please.

Oilbrnr · 01-28-2010, 06:10 PM

Quote:

Originally Posted by glock35ipsc

Just to give you all an idea of what I am doing for part numbers.

I might go through and note part you will need for sure, and what are optional. Instead of an overall list of what out there, I'm doing something more along the line of a minimum list of what you will want/need to do a swap into a square body, and might tweak it for a 67-72 also.

It's not complete, this is just where I am at right now.

Sweetness Bob!!!

rongstad · 01-28-2010, 06:54 PM

Quote:

Originally Posted by glock35ipsc

Just to give you all an idea of what I am doing for part numbers. I might go through and note part you will need for sure, and what are optional. Instead of an overall list of what out there, I'm doing something more along the line of a minimum list of what you will want/need to do a swap into a square body, and might tweak it for a 67-72 also.
It's not complete, this is just where I am at right now.

Sweeeet post!! thanks!!! now what to buy first.....

joe231 · 01-28-2010, 06:58 PM

Quote:

Originally Posted by 1972SuperCheyenne

Thats what I was thinking. Come to North Carolina first please.

yeah and stop by Ok for a week or two on the way

Driveway Dreams · 01-28-2010, 07:07 PM

A week or two...isn't that a little excessive for Super Bob? 2 days max on the next one!

joe231 · 01-28-2010, 07:09 PM

true

fpjr0 · 01-28-2010, 10:13 PM

yes bob,, that was one of the evap plug/sensor I was talking about, I am wanted to be sure I could take it off my harnesss,.. but the plug I have no idea if I need is this..hopefully this time the pics will show.. I tried re sizing them but cant

fpjr0 · 01-28-2010, 10:20 PM

also how the do you guys make them pics small... thats like the smallest I can make them?

joe231 · 01-28-2010, 10:52 PM

those pics are about the perfect size

01-28-2010, 11:13 AM	#1252
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" w/ 5.3L LS swap info Excellent. I'm in the middle of putting together a spreadsheet of part numbers that I used, and any others that are relevant that I come across, in hopes of coming up with a list of minimum parts needed to do a swap. Your thread is killer BTW!!! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 01-28-2010 at 11:16 AM.

01-28-2010, 11:21 AM	#1253
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Glock's new project: "Fred" w/ 5.3L LS swap info right on! that is a good article. i'm going through it now __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

01-28-2010, 11:38 AM	#1254
rongstad Future: 86 on GenIV power! Join Date: Jun 2009 Location: San Antonio, Texas Posts: 105	Re: Glock's new project: "Fred" w/ 5.3L LS swap info Gee another expensive part i need to buy........

01-28-2010, 11:43 AM	#1255
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Glock's new project: "Fred" w/ 5.3L LS swap info Working on another one now. Don't know if it should be added to that one or on its own. I am trying to put together a GM parts list for connectors and pins for all the harness connectors in case anyone wants to build their own harness or repair broken connectors. Its turning out to be a daunting task. All I have info for is a 2005 5.3 and I only have 80% of the connector pictures? Accelerator pedal position sensor Connector Part Information • 15318071 • 10-Way F Metri-Pack 150 Series (GY) Pin Wire Color Circuit No. Function A GY 1273 Low Reference B PU 1272 Low Reference C L-BU 1162 APP Sensor 2 Signal D TN 1274 5-Volt Reference E BN 1271 Low Reference F D-BU 1161 APP Sensor 1 Signal G WH/BK 1164 5-Volt Reference H -- -- Not Used J YE/BK 1275 5-Volt Reference K D-GN 1163 APP Sensor 3 Signal __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-28-2010, 12:17 PM	#1257
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Glock's new project: "Fred" w/ 5.3L LS swap info Very similar but I saved yours anyway. Might be easier to just use your links in my thread also. I didn't look but does yours have the transmission connectors, oil pressure, and the engine harness to coils connectors? Those weren't included in what I had and I had to find them. If you don't have those I can forward them to you in an email. Mine are in a less user friendly format. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-28-2010, 12:29 PM	#1258
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" w/ 5.3L LS swap info It has: Transmission: AT Inline 20-way connector. If I remember right, this was on he P/S of the trans Park/Neutral Position Switch Range Position Switch VSS Oil Pressure: Engine Oil Pressure (EOP) Sensor Engine Harness to Coils: Ignition Coils (1,3,5,7 cylinders) Ignition Coils (2,4,6,8 cylinders) Ignition Coil 1 Ignition Coil 2 and so on, all 8 listed individually __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

01-28-2010, 12:56 PM	#1260
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Glock's new project: "Fred" w/ 5.3L LS swap info The info I have has a few more connectors including the flex fuel injector connectors, trans shift solonoids etc. It is about 2MB if you are interested in it PM me an email address __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-28-2010, 12:58 PM	#1261
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" w/ 5.3L LS swap info My screenname, plus @aim.com Thanks! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

01-28-2010, 01:03 PM	#1262
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Glock's new project: "Fred" w/ 5.3L LS swap info Sent, let me know if you recieve it and can open it __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-28-2010, 01:14 PM	#1263
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's new project: "Fred" w/ 5.3L LS swap info Got 'em, and I can open them. Thanks again! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

01-28-2010, 01:25 PM	#1264
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Glock's new project: "Fred" w/ 5.3L LS swap info Wow, great info. That is even pretty clear to me and we all know that I am not the mechanical genius in the group. Good job!! __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here. Last edited by Driveway Dreams; 01-28-2010 at 01:26 PM.

01-28-2010, 02:52 PM	#1265
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Glock's new project: "Fred" w/ 5.3L LS swap info very cool! i dont think you can make it any easier Bob... short of traveling state to state and doing the installs yourself __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

01-28-2010, 04:13 PM	#1267
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Glock's new project: "Fred" w/ 5.3L LS swap info Thats what I was thinking. Come to North Carolina first please. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-28-2010, 07:07 PM	#1271
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Glock's new project: "Fred" w/ 5.3L LS swap info A week or two...isn't that a little excessive for Super Bob? 2 days max on the next one! __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

01-28-2010, 07:09 PM	#1272
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Glock's new project: "Fred" w/ 5.3L LS swap info true __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

01-28-2010, 10:13 PM	#1273
fpjr0 Registered User Join Date: Mar 2009 Location: san antonio tx Posts: 202	Re: Glock's new project: "Fred" w/ 5.3L LS swap info yes bob,, that was one of the evap plug/sensor I was talking about, I am wanted to be sure I could take it off my harnesss,.. but the plug I have no idea if I need is this..hopefully this time the pics will show.. I tried re sizing them but cant Attached Images

01-28-2010, 10:20 PM	#1274
fpjr0 Registered User Join Date: Mar 2009 Location: san antonio tx Posts: 202	Re: Glock's new project: "Fred" w/ 5.3L LS swap info also how the do you guys make them pics small... thats like the smallest I can make them?

01-28-2010, 10:52 PM	#1275
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Glock's new project: "Fred" w/ 5.3L LS swap info those pics are about the perfect size __________________ *CHEVY ONLY*

Register or Log In To remove these advertisements.