Do you need '64-'66 Chevy Truck Parts?

[Clyde65]

65 ash tray assy?
.
Clyde 65

[rahatawa]

I am looking to source a carb linkage for my 64. i need everything from the firewall to the carb. I can't seem to even find a place for new ones. Do you have one lying about that i could pay you for?

[LILRED66]

Originally Posted by Clyde65

65 ash tray assy?
.
Clyde 65

Hey Clyde65. PM sent. Thanks for the opportunity and let me know if I can help.

[LILRED66]

Originally Posted by rahatawa

I am looking to source a carb linkage for my 64. i need everything from the firewall to the carb. I can't seem to even find a place for new ones. Do you have one lying about that i could pay you for?

Hey rahatawa. Thanks for the inquiry. Do you need carb linkage for a factory V8 or a factory six cylinder? They are different and not interchangeable. I have both, so please let me know and I can help you with it. Thanks for the opportunity and enjoy the weekend.

[LILRED66]

Originally Posted by j.kirn

Need a front and rear bumper for a 60 fleetside

Hey j.kirn. Thanks for the inquiry. I have a few front bumpers for the '60-'62 Chevy trucks...do you want chrome or painted?

I have a few rear bumpers, also...do you want the sport bumper or step bumper? Painted or chrome?

Let me know and I will see what I have. Thanks for the opportunity and enjoy the weekend.

[LILRED66]

Originally Posted by sixbangr

I don't supose you have a right side one that is Cardinal Red? You can email pik of fenders to sixbangr@yahoo.com

Ironically, I do have a Cardinal Red front fender, but I believe it is a driver side, but I will have to check, to be sure. Do you still need one?

[LILRED66]

sonseeker:

Thanks for the inquiry. A good, used set of factory anodized aluminum body trim (8 pieces), plus the mounting clips is $200.00, plus $25.00 shipping, via UPS-Ground. The trim will ship in a PVC tub with end caps, for protection during shipping.

Thanks for the opportunity and let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future. Enjoy the weekend.

[LILRED66]

Originally Posted by 1stseries55

Tony,

I need a gas tank filler tube.... the piece that the gas cap screws onto, mine is worn out and the cap does not seal correctly. Do you have one?

thanks,
Jared

Indeed Jared. I have the gas tank filler neck, both plastic and metal. Which one do you prefer? They are $20.00, including shipping, via USPS-Priority Mail. Please let me know if I can help you with this item and thanks for the opportunity. Enjoy the weekend.

[LILRED66]

Originally Posted by SCOTI

Tony,
I'm looking for an air pressure gauge like in the pics. Have you come across any of these?

Scot:

Does the one in the photo interest you? How about the entire cluster? Please let me know your thoughts and we can try to work something out. Thanks for the opportunity and enjoy the weekend.

[LILRED66]

Originally Posted by villa 66

Hey Tony looking for a automatic steering column for a 60 chevy truck. Thanks. Noe

Hey Noe. Good to hear from you. I am fresh out of auto columns, right now. I am prospecting a few, but no dice. I will keep an eye out for one and let you know. Thanks for the inquiry and enjoy the weekend.

[LILRED66]

Originally Posted by Bulldoser65

Do you have Front fenders for a 65, I need some. Color doesnt matter cause my truck is in red primer right now.

Thanks,
John

Hey John. Thanks for the inquiry. I sell good, used front fender shells for $175.00-$200.00, depending on the overall condition. For the most part, they are rust-free and dent-free, but not perfect. Shipping usually runs about $40.00-$55.00, via UPS-Ground, depending on the location and whether it is a business or residential drop-off.

Please let me know if this fits your budget and I will reply accordingly. Thanks for the opportunity and enjoy the weekend.

[LILRED66]

Originally Posted by sixbangr

how much for a good 250 head, intake and exhaust manifolds, shipped to 67731? I will be replacing my integral parts.I fixed my pm box.

Hey 6bangr. Thanks for the inquiry. A complete top-end, including the head, exhaust manifold & intake manifold is $200.00, plus $125.00 shipping. As with any used head, I suggest a fresh valve job, so I am not sure if this is a "plug-n-play" situation.

Let me know your thoughts and I will reply accordingly. Thanks for the opportunity and enjoy the weekend.

[LILRED66]

Originally Posted by chev-obsession

Do you have any doors with no rust? If so how much for the them and shipped to 99337? If you would consider shipping them?

Hey chev-obsession. Thanks for the inquiry. I sell good, used door shells for $200.00, plus shipping, via UPS-Ground, estimated to be $60.00-$85.00, depending on location and whether it is a business or residence. They are virtually rust-free and dent-free with only minor blemishes. I alway weld-up/smooth any random, non-factory mirror holes.

If there is any minor rust-thru, I cut-out and repair the area, including smoothing the welds. I don't do any skimming, primer or paint, so the repaird area, if any, can be seen.

Please let me know your thoughts and I will reply accordingly. Thanks for the opportunity and enjoy the weekend.

[LILRED66]

Originally Posted by BGRAFX

I just realized that there are no back doors on a 60's suburban...I always thought they were 3doors like the 67-72 burbs. That makes them pretty inconvienant don't ya think?

Hey Brian. Good to hear from you. Inconvenient...not so much, since the passenger seat is a jumper. '60-'66 Chevy/GMC Suburbans only had two doors...I think the three door style started in '67...one driver side and two passenger side.

Take care and come by the shop sometime. Talk to you soon and enjoy the weekend.

[LILRED66]

Originally Posted by padresag

why would that be? no different than owning a 2 door car
ron

Ron strikes again...

[LILRED66]

Originally Posted by jyukon

Do you have any of the transmission cover extensions you mentioned in an old post? I have a gap between the cover and the firewall. How much and how much would shipping be to 62014?
Thanks

Hey jyukon. Thanks for the inquiry. I sent you a PM, so please let me know if I can help. Thanks for the opportunity and enjoy the weekend.

[LILRED66]

Originally Posted by 1969C10shortbed

Would you happen to have a 1965 original wiring harness?
Thanks in advanced.

Hey 1969C10shortbed. Thanks for the inquiry. I have a few very nice, factory underdash wiring harnesses with the factory fuse block. Do you need one that is compatible with factory gauges or warning lights? They are $100.00, including shipping. They are in good, used condition with no clipped wires or chaffed insulation.

Thanks for the opportunity and please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future. Enjoy the weekend.

[sixbangr]

Originally Posted by LILRED66

Hey 6bangr. Thanks for the inquiry. A complete top-end, including the head, exhaust manifold & intake manifold is $200.00, plus $125.00 shipping. As with any used head, I suggest a fresh valve job, so I am not sure if this is a "plug-n-play" situation.

Let me know your thoughts and I will reply accordingly. Thanks for the opportunity and enjoy the weekend.

How much for just the manifolds and the hardware to bolt them on? Shipped to 67731. I found a new rebuilt head.

[LILRED66]

$110.00, including exhaust manifold, intake manifold & shipping.

[SCOTI]

Originally Posted by LILRED66

Scot:

Does the one in the photo interest you? How about the entire cluster? Please let me know your thoughts and we can try to work something out. Thanks for the opportunity and enjoy the weekend.

That's a GMC cluster correct (I have a Chevy)?

In my perfect world, I would like a 'gauge' cluster including the factory style tach. Instead of a clock on the left hand side (which some people do for the blank/unused pod), I would prefer the air-gauge.

Of course.... like everyone else governed by a meager budget, I don't have unlimited resources & would like to keep the price in a blue-collar range.

[LILRED66]

Originally Posted by SCOTI

That's a GMC cluster correct (I have a Chevy)?

In my perfect world, I would like a 'gauge' cluster including the factory style tach. Instead of a clock on the left hand side (which some people do for the blank/unused pod), I would prefer the air-gauge.

Of course.... like everyone else governed by a meager budget, I don't have unlimited resources & would like to keep the price in a blue-collar range.

'60-'63 Chevy dash cluster with gauges and factory tach & air gauge.

[nbrfd007]

Nice seeing you free styling again Tony, missed your posts.
Tim

[low79fx]

Tony do you have a frame from a 64-66 that you wound be willing to cut or that is beyond messing with.The reason I ask is because I need the front portion of frame rails from about the engine cross member forward.I have a 65 GMC that the PO butchered the rails,I guess trying to get radiator to fit between the rails. I want to try and restore to health.I wouldn't be using the entire section but I figured that would give me enough to work with.If you do have something on hand what would you ask for them and how much to ship to 79763?Please reply!!

[SCOTI]

Originally Posted by LILRED66

'60-'63 Chevy dash cluster with gauges and factory tach & air gauge.

Ahhh.... I didn't look closely enough @ the shape vs. possible year model (in other words, I assumed it was a GMC dash ).

PM sent for more info.

[1969C10shortbed]

Originally Posted by LILRED66

Hey 1969C10shortbed. Thanks for the inquiry. I have a few very nice, factory underdash wiring harnesses with the factory fuse block. Do you need one that is compatible with factory gauges or warning lights? They are $100.00, including shipping. They are in good, used condition with no clipped wires or chaffed insulation.

Thanks for the opportunity and please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future. Enjoy the weekend.

One compatible with the factory gauges and warning lights would be great. I would love to have my 65 up and running dependably again.