What did you do to your truck today part IV - Page 51 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crewguy · 05-06-2021, 09:35 AM

Went out for the maiden voyage last night.[ATTACH] Name: IMG_3056.jpg
Views: 918
Size: 53.0 KB

[/ATTACH]

05-06-2021, 09:37 AM

That's a beauty!

roll_the_dice · 05-06-2021, 09:44 AM

Quote:

Originally Posted by crewguy

Went out for the maiden voyage last night.

Congrats! Beautiful truck...love the color.

roll_the_dice · 05-07-2021, 05:31 PM

Finally adjusted my passenger side door so my wife doesn't have to slam it anymore...

Canadian63GMC · 05-07-2021, 05:33 PM

Quote:

Originally Posted by crewguy

Went out for the maiden voyage last night.[ATTACH]Attachment 2100228[/ATTACH]

What colour is this?? Looks exactly like what I would like to do for paint!

05-07-2021, 09:24 PM

Quote:

Originally Posted by roll_the_dice

Finally adjusted my passenger side door so my wife doesn't have to slam it anymore...

I just did that to mine, only complaints were from the other direction. My son was complaining about having to slam his shoulder into the door to get out.

Replaced my rusty reverse lights, and connected them up...to a switch, don't have it setup on my shifter yet. Had to keep the old lenses, new ones looked far too clean on my old POS. Of course, this is largely for those behind me to GTF out of the way, 'cause I can't see a damn thing back there.

crewguy · 05-09-2021, 12:57 PM

Quote:

Originally Posted by Canadian63GMC

What colour is this?? Looks exactly like what I would like to do for paint!

Supposed to be GM light green #503 but it didn't quite turn out when mixed, even though the mixed sample was dead on... A little bit lighter and less blue than factory. I can live with it.

Canadian63GMC · 05-09-2021, 09:01 PM

Right hand rocker and cab corner done over the weekend Name: D91E3E00-BB7C-4DE8-B33C-3CD281EC9582.jpg
Views: 817
Size: 56.0 KB

Name: EC40B96D-13AE-4B4E-915C-34E3E45916BD.jpg
Views: 809
Size: 49.4 KB

Johns 66 · 05-09-2021, 09:23 PM

Quote:

Originally Posted by roll_the_dice

Thank you gentleman!

I installed my original dash clock today that was given to me as a gift from my best friend! I love it and it works!

Looks killer Andy!!!!!

AcampoDave · 05-10-2021, 07:20 PM

Started prep for a re-paint. Wow, the damage a set of bed hooks can do. I never addressed these properly the last time I painted it 10 years ago, but hopefully this time it wont be waving at me after I shoot the gloss to it.

05-10-2021, 07:35 PM

Quote:

Originally Posted by Canadian63GMC

Right hand rocker and cab corner done over the weekendAttachment 2100922 Attachment 2100923

Nicely done! I have to do mine, both sides and the floor...eeesh.

Canadian63GMC · 05-10-2021, 07:56 PM

Quote:

Originally Posted by dweikum

Nicely done! I have to do mine, both sides and the floor...eeesh.

Thanks! Kind of a nice project, did both sides, slowly getting this cab rust free

LostMy65 · 05-17-2021, 10:09 PM

I don't remember why I took it off, but beings we're coming into summer, I put the 60-62 fan shroud back on.

05-19-2021, 12:36 PM

Bored at work...rattle-can primer flames, just for laughs.

LostMy65 · 05-19-2021, 08:51 PM

Quote:

Originally Posted by dweikum

Bored at work...rattle-can primer flames, just for laughs.

You've got skills.

Primer red oxide?

05-19-2021, 09:00 PM

Quote:

Originally Posted by LostMy65

You've got skills.

Primer red oxide?

LOL, Thank you sir, you are too kind.
Yessir, Primer Red Oxide over flat black Rust Restorer. Not going to be using real paint anytime soon.

05-20-2021, 02:49 PM

Largely finished the install of Dual Electric Fans this morning. I found a fan set that mostly fit, but I still needed to fab up a mount for it. Of course I thought of a better way after it's all installed, but that's how it goes...will change it later, works fine for now.

SCOTI · 05-20-2021, 02:59 PM

Quote:

Originally Posted by dweikum

Largely finished the install of Dual Electric Fans this morning. I found a fan set that mostly fit, but I still needed to fab up a mount for it. Of course I thought of a better way after it's all installed, but that's how it goes...will change it later, works fine for now.

Looks good. What are the fan details/size?

05-20-2021, 03:16 PM

Quote:

Originally Posted by SCOTI

Looks good. What are the fan details/size?

Summit Racing SUM-G4852 - Summit Racing® High Output Electric Fans
Electric Fan, Black, Plastic, Dual, 11 in. Diameter, Puller, 2,760 cfm, Each

Summit Racing SUM-890114 - Electric Fan Thermostat Kit
Dual Fan Control, Non-Adjustable, 185 Degrees On/170 Degrees Off, Kit

I went with duals incase I ever install AC, I can dedicate one fan to the AC.

SCOTI · 05-20-2021, 04:02 PM

Quote:

Originally Posted by dweikum

Summit Racing SUM-G4852 - Summit Racing® High Output Electric Fans
Electric Fan, Black, Plastic, Dual, 11 in. Diameter, Puller, 2,760 cfm, Each

Summit Racing SUM-890114 - Electric Fan Thermostat Kit
Dual Fan Control, Non-Adjustable, 185 Degrees On/170 Degrees Off, Kit

I went with duals incase I ever install AC, I can dedicate one fan to the AC.

Thanks for sharing the info.

05-21-2021, 12:36 PM

Quote:

Originally Posted by dweikum

Ooooh, m-M-M-MAIL CALL!

To be continued...

Mail Call part 2! Been waiting for these to come back into stock...

Need to clean up the casting slag on the inside a little, but overall the headers are beautiful! The Clifford requires a bit more inside work.

**62bagger** · 05-21-2021, 01:40 PM

Those look great. Post a pic of the engine when you get them on.

05-21-2021, 02:09 PM

Quote:

Originally Posted by 62bagger

Those look great. Post a pic of the engine when you get them on.

Yessir, I absolutely will!
Rebuilding the Holley now...

**PORKY** · 05-23-2021, 06:37 PM

It has been over 10 years, cost too much money, and took gobs of time.
It is finally near completion and I actually drove it today.
Just a few small items left to do.

roll_the_dice · 05-23-2021, 06:39 PM

Quote:

Originally Posted by PORKY

It has been over 10 years, cost too much money, and took gobs of time.
It is finally near completion and I actually drove it today.
Just a few small items left to do.

Congrats...looks great!

05-06-2021, 09:35 AM	#1251
crewguy Registered User Join Date: Nov 2010 Location: 20 minutes east of Vancouver, B.C. Posts: 34	Re: What did you do to your truck today part IV Went out for the maiden voyage last night.[ATTACH][/ATTACH] Attached Images

05-06-2021, 09:37 AM	#1252
dweikum Guest Posts: n/a	Re: What did you do to your truck today part IV That's a beauty!

05-07-2021, 05:31 PM	#1254
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: What did you do to your truck today part IV Finally adjusted my passenger side door so my wife doesn't have to slam it anymore... __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

05-09-2021, 09:01 PM	#1258
Canadian63GMC Registered User Join Date: Aug 2020 Location: Dryden Ontario Posts: 37	Re: What did you do to your truck today part IV Right hand rocker and cab corner done over the weekend

05-10-2021, 07:20 PM	#1260
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,752	Re: What did you do to your truck today part IV Started prep for a re-paint. Wow, the damage a set of bed hooks can do. I never addressed these properly the last time I painted it 10 years ago, but hopefully this time it wont be waving at me after I shoot the gloss to it. Attached Images

05-17-2021, 10:09 PM	#1263
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: What did you do to your truck today part IV I don't remember why I took it off, but beings we're coming into summer, I put the 60-62 fan shroud back on. Attached Images __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 Last edited by LostMy65; 05-17-2021 at 10:15 PM.

05-19-2021, 12:36 PM	#1264
dweikum Guest Posts: n/a	Re: What did you do to your truck today part IV Bored at work...rattle-can primer flames, just for laughs.

05-20-2021, 02:49 PM	#1267
dweikum Guest Posts: n/a	Re: What did you do to your truck today part IV Largely finished the install of Dual Electric Fans this morning. I found a fan set that mostly fit, but I still needed to fab up a mount for it. Of course I thought of a better way after it's all installed, but that's how it goes...will change it later, works fine for now.

05-21-2021, 01:40 PM	#1272
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 283	Re: What did you do to your truck today part IV Those look great. Post a pic of the engine when you get them on.

05-23-2021, 06:37 PM	#1274
PORKY Registered User Join Date: Nov 2010 Location: LITTLETON NH Posts: 106	Re: What did you do to your truck today part IV It has been over 10 years, cost too much money, and took gobs of time. It is finally near completion and I actually drove it today. Just a few small items left to do. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.