What did you do to your truck today part III

[dwcardfan]

Painted the inside of passenger door.

[dwcardfan]

Mounted the mirror.

[jbgroby]

Thanks LDO, we ought to hoop up one day, I may take a run up Tupelk this fall ( late November)

Jake

[Johnny_Lamebridge]

Worked late and made up a couple pieces to mate my '63 Panhard Bar to a '65 rear axle. A 2" longer mounting stud, and changed the angle of the polyurethane rod end to 80 degrees. Will weld it today and see how it works.

[1971 GMC SHORTY]

Started out as Just Floor Pan.. Now whole floor pan inner and outer Rocker Cornor Front And Rear... Just Helping my Older Brother

[1971 GMC SHORTY]

Originally Posted by 1971 GMC SHORTY

Started out as Just Floor Pan.. Now whole floor pan inner and outer Rocker Cornor Front And Rear... Just Helping my Older Brother

Keep telling Myself WHY ME!!! LOL

[Turtleman]

LOL GMC SHORTY...

It just keeps getting better doesn't it

[Chevy Fleetside]

I just posted my truck for sale on a site.

[TJ's Chevy]

Painted my frame! 1st picture of primer. 2nd is paint.
EDIT: The primer hadn't flashed yet so it looks like the paint. haha

[LDO]

wow, that looks really good.

a few questions if you don't mind. How did you go about cleaning and prepping?

Did you use a rattle can or spray gun?

I'm struggling between doing mine myself or just sending out to Powder Coat.

thanks and Happy 4th!

[TJ's Chevy]

Originally Posted by LDO

wow, that looks really good.

a few questions if you don't mind. How did you go about cleaning and prepping?

Did you use a rattle can or spray gun?

I'm struggling between doing mine myself or just sending out to Powder Coat.

thanks and Happy 4th!

Thanks! These pictures do alot of justice. This is my 1st paint job. haha. I used a spray gun. The prep took DAYS of sanding and hand sanding. I would Highly recommend having yours sand blasted. Much faster and alot easier. Powder coat would be the way to go as it won't crack from the twisting of your frame if you ever get in that situation. Cleaning the frame I washed it with water...dried it..then went over it with lacquer thinner then used tack cloth to try and get as much of the fine dust off as possible. After that it was a matter of setting the gun correctly and finding the sweet spot. Its hard for sure. lol

[66Submarine]

I painted mine white the other day.

I started on it at 5:00PM and had to drive it 55 miles back home after I was done with it...

[Grizz1963]

Well, another Saturday gone, but a good day it was.

Martin and I jumped on our bikes, thankfully as the A2M2 was backed up from J5 to J3 and we ended up using the old A2 to get to Darren's place on the Isle of Sheppey.

Martin wanted to go discuss V8 engines and gearboxes with Darren, and I always find his and all his gang who hang around at his workshop and factory hugely relaxing. Real people, no pretence or Horse Poop. Just Horse Power.

Darren has a hugely interesting yard, with many treasures.

Sadly, this is what remains of an 70-80's Show van.






I managed to rob the steering wheel and boss from it, plan is to restore the steering wheel, just because I can.



Also found this old Hazet tool box for my Imperial sockets inside the van.



Today I also ordered a set of V8 exhaust hangers in laser cut Stainless steel from Darren for the truck. Not sure exactly how I will use them with the side exit pipes, but they are irresistible.




Lastly, I managed to shove this down the front of my bike riding trousers..... Quite a difficult feat in this heat....... Then managed to convince Darren to sell it to me if it fits, for the truck, needs a boss that fits the column I previously bought. Not cheap in my book, but absolutely gorgeous, a highlight in the cab when it is done.

A bit extravagant in my normal book, but as Nicola said to me, we work hard, I do not smoke or drink, (there is the odd rum or brandy from time to time) so why not a treat from time to time.

Nicola and I love these Pinup type girls, and the detail on this job is rather pleasing. The White of the wheel will go with the Mercedes Benz off-White I am doing the roof and side flash.

I may just take the steering wheel to bed with me tonight.






Learned a few things from Darren, including the fact that I will need to make up a new rose jointed Panhard rod for the rear end as it was dropped 4"
That's one of the nice things about this hobby, all the sharing that goes on.

[TJ's Chevy]

Originally Posted by 66Submarine

I painted mine white the other day.

I started on it at 5:00PM and had to drive it 55 miles back home after I was done with it...

Looks good! Outta be a bit cooler in there now during the summer months. haha

[BR3W CITY]

I reinstalled my cooling system, some wiring and all the misc parts of the frontend. Filled and bled it and did some last minute re torquing. Obviously I'm missing a piece hahaha, but I wanted to drive her on the 4th
Posted via Mobile Device

[Joemomma1]

Originally Posted by jbgroby

Rigged in a few ground straps today, got at least 4 more to go, not counting the heavy duty straps for the block.

Was is painful scratching that new paint?

[The Rocknrod]

Originally Posted by 1963c-10

I ground off the rivets to remove mine. Wasn't too bad of a job. Plenty of room to work the crossmember out once the rivets are gone.

Well Yesterday I removed the body (engine hoist) and ground off all the rivets on the two offending cross members. Wow.
Now for the rear bump stops and maybe the trailing arm cross member.

[Pappyx3!]

Hauled my first load with old country today. The family was glad we showed up!

Pappyx4!

[TJ's Chevy]

Originally Posted by Pappyx3!

Hauled my first load with old country today. The family was glad we showed up!

Pappyx4!

Them ol 6 bangers never let ya down. lol

[jbgroby]

Yes very, but its like pulling a tooth- you know you gonna get the needle but it can be finished ;p

Originally Posted by Joemomma1

Was is painful scratching that new paint?

[LDO]

sometimes it's the little things that make me smile.

the 'face' of my ps pump was starting to flash over a little so i figured since it wasn't installed yet, i would throw some paint on it to keep it looking nice.

I wanted to plug up the 4 bolt holes but didn't want to use the bolts and get paint all over them.

Came across these push pins the wife had that fit perfectly, keeps the primer/paint out of the threaded holes and are pretty cheap (free).

just gotta be a little careful, these littler boogers are sharp!

pics....

[OldChevy61]

Broke out the sandblaster and cleaned a little of the frame. Shot a coat of rust stop primer on,now hoping the rain holds off till it completely dries. Just bought one of the HF portable carports. Should be here in a couple days. Bout to put this thing in the dry where it belongs.

[Lugnutz65]

Originally Posted by LDO

Came across these push pins the wife had that fit perfectly, keeps the primer/paint out of the threaded holes and are pretty cheap (free).

Nice little trick there LDO! You should post that on PINTEREST . . .

I smacked my stepside rock guards into a more useable shape. I showed them no mercy. They were more twisted than a Rubik's Cube. Now they look respectable. Next comes media blasting and epoxy primer.

[Pappyx3!]

Originally Posted by TJ's Chevy

Them ol 6 bangers never let ya down. lol

I've been real pleased with the old truck to this point. Put about 1,000 miles on it so far, seeing a few oil leaks that I'm gonna have to deal with, but I will probably try to wait them out until winter time when I do some clean up work.

Thanks,

Pappyx4!

[yote1234]

re-tightened bed bolts and installed new NOS arm rest!