What did you do to your truck today! - Page 52 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glider_6969 · 01-08-2011, 11:32 PM

Well finally decided to cut the floor for my shifter,,it didn't hurt to much

Name: shifter 001.jpg
Views: 652
Size: 50.6 KB

MikeM · 01-08-2011, 11:40 PM

Made some seat brackets today

BAGNDRAGIT · 01-09-2011, 12:23 AM

vacuumed up all the sunflower seeds from the PO.
figured out i need an intake/exhaust gasket. (inline 6)

glider_6969 · 01-09-2011, 06:55 PM

Updated pic of the new steering wheel, and completed the install on the new floorshifter and linkage and removed shifter off the column.
Name: shifter1 002.jpg
Views: 645
Size: 47.4 KB

Name: shifter1 002.jpg
Views: 645
Size: 47.4 KB

Name: shifter1 003.jpg
Views: 643
Size: 52.3 KB

*project 67 sub* · 01-09-2011, 07:04 PM

bought another part, suburban 3rd door lower hinge from sharpie1972

Bowtie1216 · 01-09-2011, 07:57 PM

Replaced my front and rear shocks in 25 degree weather! yay, Don't you love them ol' trucks.

sjarrett71 · 01-09-2011, 09:07 PM

Started it and let it run a while. Haven't done that in a while since it turned cold. Everything worked fine too!

Hubscrub · 01-09-2011, 10:01 PM

installed my new clutch fan week ago in place of the flex fan haven't drove it yet because the yard is too muddy from the snow and rain (had to lock my 4wheel drive in on my 86 to get it out of the back yard and suppost to snow 4-8 inchs tonight and tomm. So it might not move till spring and i live in the south!

*project 67 sub* · 01-09-2011, 10:26 PM

bought another part

. a new grey dash pad from gringoloco.

ItsRandy · 01-09-2011, 10:35 PM

Sprayed oven cleaner on some more parts, washed it off and finally found a little rust...not to worry, it's low on the pass side front fender well and only superficial. California truck.
Posted via Mobile Device

pat 70/71 · 01-09-2011, 10:45 PM

Changed out all the cab & core support mounts on my 72/3/4 ton project. pulled the grille, realigned the doors& front clip pics to follow. cheers, Pat

myoldchevytruck · 01-09-2011, 11:34 PM

Ughhhhh, the previous owner had decided that 4 inch trailer lights from Wal-Mart was the way to go for brake lights. Today, we decided differently. I had a few pieces of 14 gauge steel and the neighbor kid was more than willing to weld in the patches and this was what we finished prior to it getting dark. !'ll finish grinding tomorrow as it just got to late and too noisy

here's a few shots of my neighbor welding in the patches

ottc10 · 01-09-2011, 11:38 PM

Today I picked up a turbo 400 and all the stuff to convert it from a stick to auto.Also picked up a chrome front bumper.

k7elh · 01-09-2011, 11:50 PM

I went

k7elh · 01-09-2011, 11:51 PM

Well, today I went and got my book out of my truck.

I'm broke and it's my daily driver. Can't afford to tear it apart, lest I not be able to get to work in the morning.

Navy Mechanic · 01-10-2011, 12:51 AM

Finished installing the rear drop springs, shocks and trac-bar.

Hubscrub · 01-10-2011, 07:56 AM

Quote:

Originally Posted by Navy Mechanic

Finished installing the rear drop springs, shocks and trac-bar.

where did you buy the track bar and fit good? i got to do that on my wife's truck

and my truck is snowed in again man we are getting it this year in the south

Navy Mechanic · 01-10-2011, 08:26 AM

Quote:

Originally Posted by Hubscrub

where did you buy the track bar and fit good? i got to do that on my wife's truck

and my truck is snowed in again man we are getting it this year in the south

Early Classics. Fit perfectly and was pretty easy to install.

Hubscrub · 01-10-2011, 08:53 AM

^ thanks

myoldchevytruck · 01-10-2011, 10:16 AM

Quote:

Originally Posted by Navy Mechanic

Finished installing the rear drop springs, shocks and trac-bar.

I installed the same ECE Super Track Bar with 6 inch drop coils last year. Great Setup.

Navy Mechanic · 01-10-2011, 11:51 AM

Quote:

Originally Posted by myoldchevytruck

I installed the same ECE Super Track Bar with 6 inch drop coils last year. Great Setup.

I went with 5" springs in the rear. The install was straight forward and all components fit as advertised. Starting on the front this evening. Installing 1" drop coil combined with 2 1/2" drop spindles.

*project 67 sub* · 01-10-2011, 11:35 PM

got a free '68 a/c dash from a buddy today, just had to remove it from the cut up cab
Name: Photo01101718.jpg
Views: 608
Size: 89.8 KB

Name: Photo01101718_1.jpg
Views: 576
Size: 81.5 KB

Name: Photo01101720_1.jpg
Views: 580
Size: 81.6 KB

k7elh · 01-10-2011, 11:48 PM

Quote:

Originally Posted by project 67 sub

got a free '68 a/c dash from a buddy today, just had to remove it from the cut up cab
Attachment 679185

Attachment 679186

Attachment 679187

Damn! Nice price!

ItsRandy · 01-11-2011, 12:11 AM

I killed some rust on an inner fender well and put on a coat of primer, will wait until tomorrow to topcoat the fender week. Still cleaning and painting.
Posted via Mobile Device

*project 67 sub* · 01-11-2011, 12:17 AM

Quote:

Originally Posted by k7elh

Damn! Nice price!

haha yah i thought so to lol so i jumped on it, because it if i didnt remove it, it would have went to the scrap yard. gonna give the dash pad to a buddy to redo for his because i have a new one coming.

01-08-2011, 11:32 PM	#1276
glider_6969 Registered User Join Date: Jan 2010 Location: Ontario Posts: 400	Re: What did you do to your truck today! Well finally decided to cut the floor for my shifter,,it didn't hurt to much

01-08-2011, 11:40 PM	#1277
MikeM Registered User Join Date: Jul 2010 Location: LI, NY Posts: 31	Re: What did you do to your truck today! Made some seat brackets today Last edited by MikeM; 01-08-2011 at 11:40 PM.

01-09-2011, 12:23 AM	#1278
BAGNDRAGIT Just Not Low Enough! Join Date: Mar 2009 Location: Phoenix, AZ Posts: 525	Re: What did you do to your truck today! vacuumed up all the sunflower seeds from the PO. figured out i need an intake/exhaust gasket. (inline 6) __________________ NEED ELECTRICAL HELP? ASK ME! 67-72 Full Wiring Diagrams Lots Of Info, TAKE A LOOK 1967 Chevy C-10 Shortbox Bagged 327 4spd Previous: 1971 Chevy C-10 Short Sep I6 Auto (Traded) 1973 Chevy C-20 THE REDNECK BATTLE TRUCK 2001 Chevy Silverado 2Dr 5.3L Shortbox. R.I.P. 1969 Volkswagen Bug This is my first meeting, I have a horsepower problem.

01-09-2011, 06:55 PM	#1279
glider_6969 Registered User Join Date: Jan 2010 Location: Ontario Posts: 400	Re: What did you do to your truck today! Updated pic of the new steering wheel, and completed the install on the new floorshifter and linkage and removed shifter off the column.

01-09-2011, 07:04 PM	#1280
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! bought another part, suburban 3rd door lower hinge from sharpie1972

01-09-2011, 07:57 PM	#1281
Bowtie1216 Registered User Join Date: Jan 2011 Location: Rose Hill, Kansas Posts: 19	Re: What did you do to your truck today! Replaced my front and rear shocks in 25 degree weather! yay, Don't you love them ol' trucks. __________________ 1972 Chevy C/10 Custom Deluxe 1973 Chevy C/10 Custom Deluxe Bowties for life

01-09-2011, 09:07 PM	#1282
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: What did you do to your truck today! Started it and let it run a while. Haven't done that in a while since it turned cold. Everything worked fine too! __________________ -Scott- Last edited by sjarrett71; 01-09-2011 at 10:40 PM.

01-09-2011, 10:01 PM	#1283
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: What did you do to your truck today! installed my new clutch fan week ago in place of the flex fan haven't drove it yet because the yard is too muddy from the snow and rain (had to lock my 4wheel drive in on my 86 to get it out of the back yard and suppost to snow 4-8 inchs tonight and tomm. So it might not move till spring and i live in the south! __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

01-09-2011, 10:26 PM	#1284
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! bought another part . a new grey dash pad from gringoloco. Last edited by project 67 sub; 01-13-2011 at 07:58 PM.

01-09-2011, 10:35 PM	#1285
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Sprayed oven cleaner on some more parts, washed it off and finally found a little rust...not to worry, it's low on the pass side front fender well and only superficial. California truck. Posted via Mobile Device

01-09-2011, 10:45 PM	#1286
pat 70/71 Registered User Join Date: Nov 2009 Location: newbury park california Posts: 1,038	Re: What did you do to your truck today! Changed out all the cab & core support mounts on my 72/3/4 ton project. pulled the grille, realigned the doors& front clip pics to follow. cheers, Pat

01-09-2011, 11:34 PM	#1287
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: What did you do to your truck today! Ughhhhh, the previous owner had decided that 4 inch trailer lights from Wal-Mart was the way to go for brake lights. Today, we decided differently. I had a few pieces of 14 gauge steel and the neighbor kid was more than willing to weld in the patches and this was what we finished prior to it getting dark. !'ll finish grinding tomorrow as it just got to late and too noisy here's a few shots of my neighbor welding in the patches __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors Last edited by myoldchevytruck; 01-09-2011 at 11:36 PM.

01-09-2011, 11:38 PM	#1288
ottc10 Registered User Join Date: Jan 2011 Location: Auburn,WA Posts: 16	Re: What did you do to your truck today! Today I picked up a turbo 400 and all the stuff to convert it from a stick to auto.Also picked up a chrome front bumper.

01-09-2011, 11:50 PM	#1289
k7elh Registered User Join Date: Jul 2010 Location: Fallbrook, CA Posts: 65	Re: What did you do to your truck today! I went __________________ Eric Hutchins 1970 Chevy C10 CST Last edited by k7elh; 01-09-2011 at 11:52 PM. Reason: Messed up my messag and double posted.

01-09-2011, 11:51 PM	#1290
k7elh Registered User Join Date: Jul 2010 Location: Fallbrook, CA Posts: 65	Re: What did you do to your truck today! Well, today I went and got my book out of my truck. I'm broke and it's my daily driver. Can't afford to tear it apart, lest I not be able to get to work in the morning. __________________ Eric Hutchins 1970 Chevy C10 CST



Register or Log In To remove these advertisements.

01-10-2011, 12:51 AM	#1291
Navy Mechanic Registered User Join Date: Nov 2010 Location: Richmond, TX. Posts: 127	Re: What did you do to your truck today! Finished installing the rear drop springs, shocks and trac-bar. Attached Images __________________ *"Once a Chief, always a Chief!" MCPO (ret)* 03 2500HD- 'Daily driver' 67 Short Fleet- 'Drivable project!' 11 Malibu LTZ- 'The Wife's ride'

01-10-2011, 08:53 AM	#1294
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: What did you do to your truck today! ^ thanks __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

01-10-2011, 11:35 PM	#1297
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! got a free '68 a/c dash from a buddy today, just had to remove it from the cut up cab

01-11-2011, 12:11 AM	#1299
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! I killed some rust on an inner fender well and put on a coat of primer, will wait until tomorrow to topcoat the fender week. Still cleaning and painting. Posted via Mobile Device

Register or Log In To remove these advertisements.