Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by 65BURB

Hi,
Looking for the original GM hazard flasher switch (64-65). And original locking hubs for the 4x4.

Thanks for your time, Greg

Hey Greg. Thanks for the opportunity. I have a few of the Flarstat-Signalstat 105 flashers assemblies with good wires and pull knob. I am not sure if it is specific to the GMC truck from '65 & '66, but I know it is correct for the '62-'66 Chevy trucks. It is NOS with all the correct, unmolested, factory connectors. It is $250.00, including shipping, via USPS-Priority Mial.

[LILRED66]

Originally Posted by dbaillargeon

I have a single barrel on a 305 V6? I don't know if I can put a double or 4 barrel but will be will to purchase what ever I need

Thanks

Thanks for the inquiry. I am not able to help you with the carb on a 305E, but this guy can:

Ed Snyder
62gmc@starband.net

He does a custom modification on a factory 305 intake manifold, to accept a small cfm 4-barrell carb, so I am certain he can help you.

Also, try here:

www.6066gmcguy.org

[LILRED66]

Originally Posted by sixbangr

bought one from an old wrecking yard this morning for $20. The horn ring is broken. How much for the ring?

Schucks...I only have the center piece. I don't have any loose Custom chrome horn ring assemblies.

[LILRED66]

Originally Posted by fredm98

Hi looking for a pair of stepside tail lights. I need the buckets and lenses both, but not the backup lights.
Thanks,
Fred

Do you need the stand-off brackets, buckets and lenses...complete assemblies? I have a complete factory set, but they are the style that cantilevers out from the rear stepside stake pocket. They are $50.00 per paint, including shipping, via USPS-Priority Mail.

[1969C10shortbed]

Originally Posted by LILRED66

Hey Chris, did you find what you needed? If not, I have a new underdash harness for a '66 without factory gauges. It is new and never installed. It is $200.00, plus $22.00 shipping, via UPS-Ground.

Actually I was going to ask you if you have pictures of the two different dashes that show the difference between the two are, I would be greatly appreciative.

Thanks

Chris

[creep]

Could you give me a price for a good 63-66 rear chrome bumper and brackets shipped to 44035? It doesn't have to be perfect just strait and shiny.

[aboz]

Do you have a split exhaust manifold that will fit my 250 in line six?

[LILRED66]

Originally Posted by 1969C10shortbed

Actually I was going to ask you if you have pictures of the two different dashes that show the difference between the two are, I would be greatly appreciative.

Thanks

Chris

Here are a few photos, showing the differences.

[LILRED66]

Originally Posted by creep

Could you give me a price for a good 63-66 rear chrome bumper and brackets shipped to 44035? It doesn't have to be perfect just strait and shiny.

front or rear?

[LILRED66]

Originally Posted by aboz

Do you have a split exhaust manifold that will fit my 250 in line six?

Thanks for the inquiry. I don't have any trick exhaust system setups for the six cylinders. I do see them online on eBay, quite often, so you might try there. Also, go to www.inliners.org for a lot of information and parts sources for high performance inline goodies.

[creep]

Originally Posted by LILRED66

front or rear?

Rear.

[LILRED66]

Originally Posted by creep

Rear.

step or fleet?

[creep]

Fleet

[chev-obsession]

Originally Posted by LILRED66

Hey chev-obsession. Thanks for the inquiry. I sell good, used door shells for $200.00, plus shipping, via UPS-Ground, estimated to be $60.00-$85.00, depending on location and whether it is a business or residence. They are virtually rust-free and dent-free with only minor blemishes. I alway weld-up/smooth any random, non-factory mirror holes.

If there is any minor rust-thru, I cut-out and repair the area, including smoothing the welds. I don't do any skimming, primer or paint, so the repaird area, if any, can be seen.

Please let me know your thoughts and I will reply accordingly. Thanks for the opportunity and enjoy the weekend.

allrighty thanks a bunch!

[LILRED66]

Originally Posted by creep

Fleet

Oh snap...the only chrome rear sport bumper I have is for a stepside. I have a few painted sport bumpers for the fleetsides, but that will not help you. Thanks for the opportunity and let me know if I can help you with anything in the future.

[Camper Special]

Hi, New to Forum, after a 13 year hiatus my better half has given the green light to resume restoring my '65 3/4 ton camper special. I am interested in the doors you offer, both driver & passenger sides. Thanks

[LILRED66]

Originally Posted by chev-obsession

allrighty thanks a bunch!

Sorry I couldn't help you...regardless of what you do, I suggest purchasing good, used factory original sheet metal. The quality, fit & finish of the aftermarket reproduction sheet metal parts are inferior, so beware. I am speaking from personal experience. Whether you purchase from me or someone else, try to buy good, used stuff.

[LILRED66]

Originally Posted by Camper Special

Hi, New to Forum, after a 13 year hiatus my better half has given the green light to resume restoring my '65 3/4 ton camper special. I am interested in the doors you offer, both driver & passenger sides. Thanks

Congrats and welcome aboard.

Here is what it can look like after you are done...maybe your wife will like it better after you finish it up.

[Camper Special]

Very nice, maybe I'll show her these pics as potential outcome! On the doors,do you have any available? or should I send you a pm? Thanks

[fredm98]

Originally Posted by LILRED66

Do you need the stand-off brackets, buckets and lenses...complete assemblies? I have a complete factory set, but they are the style that cantilevers out from the rear stepside stake pocket. They are $50.00 per paint, including shipping, via USPS-Priority Mail.

I'm not exactly sure what you mean by cantilever. Is it like this? And is it safe to assume the lenses are in good shape? If all the above is true, I'd like to get the complete set. Please let me know how to proceed.
Thanks, Fred

[LILRED66]

Originally Posted by fredm98

I'm not exactly sure what you mean by cantilever. Is it like this? And is it safe to assume the lenses are in good shape? If all the above is true, I'd like to get the complete set. Please let me know how to proceed.
Thanks, Fred

That is what I meant and the photo is of the factory style offset bracket. I will double-check the condition of the lenses, to make sure they are in good order, however, they are 40+ years old. In any case, I will let you know what I find out. Thanks for the opportunity and enjoy the evening.

[LILRED66]

Originally Posted by Camper Special

Very nice, maybe I'll show her these pics as potential outcome! On the doors,do you have any available? or should I send you a pm? Thanks

Inventory changes weekly, if not daily, so what I have today, I may not have tomorrow. Let me know if you want me to earmark a set for you. If I don't have any in stock, worthy of rust-free/dent-free, I will prospect until I find a pair.

[1969C10shortbed]

Originally Posted by LILRED66

Here are a few photos, showing the differences.

Wow, yeah I know which one I have now. It would be the one with gauges, the second one. You mentioned how much for it shipped? PMing would probably be best. I'll send one.

Thank you

Chris

[sixbangr]

can you send me a picture of a pair of used front fenders? Needing minor repair is fine.Need price shipped to 67731. sixbangr@yahoo.com

[nbrfd007]

Tony,
Do you have a flywheel/clutch dust cover for my 62 GMC?
Thanks,
Tim