How about some pics of 73-91 crew cabs - Page 54 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*BGRAFX* · 05-26-2010, 01:57 PM

Truck looks great with the 55 rear fender, I need to get my dually stance down like that

88bagedntaged · 05-26-2010, 05:26 PM

Man see thats what im talking about this is whats cool every body on this forum has the same trauck persay but its how you make it your own that makes evey single one of them different

Racker · 05-26-2010, 05:59 PM

Quote:

Originally Posted by JCampbell

Wow. That's a different take on the rear fenders.

It is what i had laying around, plus i only needed about 4"-5" to cover the outer dual.

joe231 · 05-26-2010, 09:36 PM

I'm gonna pretend i didn't read some of you guys hatin' on crew cab short beds

Racker, I dig the fenders.

I always wanted to build a '64-5-6 dually and use the step fenders like that

Devillusion · 05-26-2010, 09:58 PM

Love it......thought about using ones from a 73-87 myself. Just might have to be more serious about it now.

good job so far.

Mr Pops · 05-27-2010, 03:20 PM

Had to pick up a free car.. Lifted truck comes in handy for rigging a last minute hitch for a borrowed goose neck..

joe231 · 05-27-2010, 04:10 PM

Very cool hitch there Mr. Pops!

Mr Pops · 05-27-2010, 04:17 PM

Quote:

Originally Posted by joe231

Very cool hitch there Mr. Pops!

I couldn't believe how well it worked and how perfectly level the trailer was. I have a two piece hitch that's adjustable for height, so I flipped it upside down and flipped the ball. It didn't make for very good weight distribution, but it worked fine for a light car..

Mr Pops · 05-28-2010, 02:57 PM

My doors are a little thicker than I thought thanks to some bodywork from a previous owner.. I HATE BONDO!!!!

88bagedntaged · 05-28-2010, 04:33 PM

Quote:

Originally Posted by joe231

I'm gonna pretend i didn't read some of you guys hatin' on crew cab short beds

Racker, I dig the fenders.

I always wanted to build a '64-5-6 dually and use the step fenders like that

Soooooooooooooo sorry lol its very cool but not my style but all respect to you who cannot haul the gas station inthe bed

88bagedntaged · 05-28-2010, 06:29 PM

Ok peoples , i have a few questions

1 i would like to lower my cc dually, does the towing capacity change?
2 i plan on just an axle flip if so do i need air bags?
3 and i do pull is there any down fall to a cool one ton on the low ??
4 am i forgetting anything or is there anything else i should know thanks this forum rocks

1badgmc · 05-28-2010, 06:58 PM

Quote:

Originally Posted by 88bagedntaged

Ok peoples , i have a few questions

1 i would like to lower my cc dually, does the towing capacity change?

It doesn't have to.

Quote:

2 i plan on just an axle flip if so do i need air bags?

No, but...

Quote:

3 and i do pull is there any down fall to a cool one ton on the low ??

...since you do still plan on pulling with it, I would recommend some helper bags for the rear. There is nothing cooler than a slammed dually proudly showing the world that it can still do the deed!!

anson0487 · 05-28-2010, 11:55 PM

My crew cab project and the parts doner 90 sub. Its also gettin a short wide bed box.
Name: pictures 008.jpg
Views: 5669
Size: 83.6 KB

Name: pictures 009.jpg
Views: 5691
Size: 85.2 KB

Name: pictures 022.jpg
Views: 5727
Size: 81.3 KB

PureLuck88 · 05-29-2010, 12:54 AM

Nice project. you plan on swapping the 3/4 to the 1/2 ton? or you going to do the Hills Hot Rod 3/4 ton short bed look

anson0487 · 05-29-2010, 01:08 AM

I am planning on leaving it 3/4 ton, 2 wheel drive. TBI 350, 700r4. Aside from swapping all the sheet metal and motor/trans from the suburban the only major mod. is shorting the frame for short wide bed.

PureLuck88 · 05-29-2010, 01:11 AM

going to look good keeping the 3/4 ton running gear. what color is it going to be

anson0487 · 05-29-2010, 01:24 AM

I was thinking gray or silver, but when i found this sub in such great condition, now im thinkin probly black. it will be alot less paint work.

PureLuck88 · 05-29-2010, 01:45 AM

black would look cool but it shows everything. lol.

GmtGmt · 05-29-2010, 07:19 AM

got any interior shots?

anson0487 · 05-31-2010, 03:19 PM

88bagedntaged · 06-01-2010, 01:55 PM

i know its a little new than what the post if foe but here is a 1994 one ton cc i put a 95 12 valve in. man it made it a truck then lol

wendling053 · 06-01-2010, 09:10 PM

Quote:

Originally Posted by 88bagedntaged

i know its a little new than what the post if foe but here is a 1994 one ton cc i put a 95 12 valve in. man it made it a truck then lol

How hard was the swap?

**Dieselwrencher** · 06-01-2010, 09:24 PM

Nice swap bagedntaged.

88bagedntaged · 06-01-2010, 11:14 PM

Quote:

Originally Posted by wendling053

How hard was the swap?

Not bad i made my own motor mounts and hooked the 47re OD up on hobbs switches do it shifted into OD by line pressure. That truely was the tricky part getting each switch "3" total to the correct pressure but when i got it right man it would haul the mail

It was bored 20 over and had a 50 hp fuel plate with 120 hp stage 2 injectors and NO SILENCER RING

. it was the best truck i have built so far but my 88 CC will Take over the world HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA ................... a sinister laugh insues......

88bagedntaged · 06-01-2010, 11:15 PM

Quote:

Originally Posted by Dieselwrencher

Nice swap bagedntaged.

Thank you!!! from a name like yours im sure your a avid diesel pro...

05-26-2010, 01:57 PM	#1326
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: How about some pics of 73-91 crew cabs Truck looks great with the 55 rear fender, I need to get my dually stance down like that

05-26-2010, 05:26 PM	#1327
88bagedntaged Registered User Join Date: Jan 2010 Location: Dallas Tx Posts: 172	Re: How about some pics of 73-91 crew cabs Man see thats what im talking about this is whats cool every body on this forum has the same trauck persay but its how you make it your own that makes evey single one of them different

05-26-2010, 09:36 PM	#1329
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: How about some pics of 73-91 crew cabs I'm gonna pretend i didn't read some of you guys hatin' on crew cab short beds Racker, I dig the fenders. I always wanted to build a '64-5-6 dually and use the step fenders like that __________________ *CHEVY ONLY* Last edited by joe231; 05-26-2010 at 09:37 PM.

05-26-2010, 09:58 PM	#1330
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: How about some pics of 73-91 crew cabs Love it......thought about using ones from a 73-87 myself. Just might have to be more serious about it now. good job so far.

05-27-2010, 03:20 PM	#1331
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: How about some pics of 73-91 crew cabs Had to pick up a free car.. Lifted truck comes in handy for rigging a last minute hitch for a borrowed goose neck.. Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

05-27-2010, 04:10 PM	#1332
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: How about some pics of 73-91 crew cabs Very cool hitch there Mr. Pops! __________________ *CHEVY ONLY*

05-28-2010, 02:57 PM	#1334
Mr Pops Ridin' Dirty Join Date: Oct 2009 Location: Ardrossan Alberta Canada Posts: 2,193	Re: How about some pics of 73-91 crew cabs My doors are a little thicker than I thought thanks to some bodywork from a previous owner.. I HATE BONDO!!!! Attached Images __________________ 1978 C3500 Crewcab (Project) 1979 C2500 Crewcab (Driver/project) 1988 R2500 Crewcab (Driver) 1988 V3500 Crewcab 1988 R2500 Crewcab (Mint, Ex Fire Dept) 1968 Chev Suburban (4x4 conversion) LINK 1970 Chev C20 Suburban (driver/cruiser)LINK 2005 Impala (Incognito vehicle) 2004 Yukon XL Denali (Kid hauler) 1947 Case tractor Facebook Page(1000's of pictures of GM cars and trucks organized into albums) YouTube Channel

05-28-2010, 06:29 PM	#1336
88bagedntaged Registered User Join Date: Jan 2010 Location: Dallas Tx Posts: 172	Re: How about some pics of 73-91 crew cabs Ok peoples , i have a few questions 1 i would like to lower my cc dually, does the towing capacity change? 2 i plan on just an axle flip if so do i need air bags? 3 and i do pull is there any down fall to a cool one ton on the low ?? 4 am i forgetting anything or is there anything else i should know thanks this forum rocks

05-28-2010, 11:55 PM	#1338
anson0487 One of these days....... Join Date: Apr 2006 Location: Oklahoma Posts: 102	Re: How about some pics of 73-91 crew cabs My crew cab project and the parts doner 90 sub. Its also gettin a short wide bed box.

05-29-2010, 12:54 AM	#1339
PureLuck88 Registered User Join Date: Feb 2010 Location: Norman, Ok Posts: 64	Re: How about some pics of 73-91 crew cabs Nice project. you plan on swapping the 3/4 to the 1/2 ton? or you going to do the Hills Hot Rod 3/4 ton short bed look Last edited by PureLuck88; 05-29-2010 at 12:56 AM.

05-29-2010, 01:08 AM	#1340
anson0487 One of these days....... Join Date: Apr 2006 Location: Oklahoma Posts: 102	Re: How about some pics of 73-91 crew cabs I am planning on leaving it 3/4 ton, 2 wheel drive. TBI 350, 700r4. Aside from swapping all the sheet metal and motor/trans from the suburban the only major mod. is shorting the frame for short wide bed.

05-29-2010, 01:11 AM	#1341
PureLuck88 Registered User Join Date: Feb 2010 Location: Norman, Ok Posts: 64	Re: How about some pics of 73-91 crew cabs going to look good keeping the 3/4 ton running gear. what color is it going to be

05-29-2010, 01:24 AM	#1342
anson0487 One of these days....... Join Date: Apr 2006 Location: Oklahoma Posts: 102	Re: How about some pics of 73-91 crew cabs I was thinking gray or silver, but when i found this sub in such great condition, now im thinkin probly black. it will be alot less paint work.

05-29-2010, 01:45 AM	#1343
PureLuck88 Registered User Join Date: Feb 2010 Location: Norman, Ok Posts: 64	Re: How about some pics of 73-91 crew cabs black would look cool but it shows everything. lol.

05-31-2010, 03:19 PM	#1345
anson0487 One of these days....... Join Date: Apr 2006 Location: Oklahoma Posts: 102	Re: How about some pics of 73-91 crew cabs



Register or Log In To remove these advertisements.

06-01-2010, 01:55 PM	#1346
88bagedntaged Registered User Join Date: Jan 2010 Location: Dallas Tx Posts: 172	Re: How about some pics of 73-91 crew cabs i know its a little new than what the post if foe but here is a 1994 one ton cc i put a 95 12 valve in. man it made it a truck then lol Attached Images

06-01-2010, 09:24 PM	#1348
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: How about some pics of 73-91 crew cabs Nice swap bagedntaged. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Register or Log In To remove these advertisements.